4,654
edits
Changes
Making Custom BLE Sensor configuration and preset (view source)
Revision as of 16:26, 28 December 2023
, 16:26, 28 December 2023Text replacement - "Bluetooth(?!®)" to "Bluetooth®"
==Disclaimer==
[[File:Alert.png|left|link=]] <br> If you are not using Bluetooth®, '''please consider turning it off''' or '''change Bluetooth® PIN''' to remove potential risks.
If you are using Bluetooth® we strongly recommend '''using AES encryption''' for enhanced security.
== Introduction ==
== Introduction ==
The first thing you have to know before configuring a sensor is data protocol.
The first thing you have to know before configuring a sensor is data protocol.
Prerequisites:
Prerequisites:
# BT radio is enabled in the Bluetooth section of the configurator.
# BT radio is enabled in the Bluetooth® section of the configurator.
# Codec8extedended set in the System section of the configurator.
# Codec8extedended set in the System section of the configurator.
* Action = Save -> save to IO element.
* Action = Save -> save to IO element.
* IO = custom -> We do not know the protocol yet, so we use custom that can be used for HEX data.
* IO = custom -> We do not know the protocol yet, so we use custom that can be used for HEX data.
IO tab of configurator: enable BLE custom X where X is the sensor number in Bluetooth 4.0 section.
IO tab of configurator: enable BLE custom X where X is the sensor number in Bluetooth® 4.0 section.
== Including Presets in the next base configurator release ==
== Including Presets in the next base configurator release ==
On the client's request or based on TPS insights about the client's use case, it might be needed to add the sensors to our available presets with the next configurator release. Check with your sales manager about the conditions and information needed to include the preset on the next release.
On the client's request or based on TPS insights about the client's use case, it might be needed to add the sensors to our available presets with the next configurator release. Check with your sales manager about the conditions and information needed to include the preset on the next release.
[[Category: Frequently Asked Questions - FAQ]]
[[Category: Frequently Asked Questions - FAQ]]
