215
edits
Changes
no edit summary
== Overspeeding ==
== Overspeeding ==
[[File:Overspeedinggif2.gif|alt=|right|374x374px]]
[[File:Overspeedinggif2.gif|alt=|right|374x374px]]
When vehicle speed exceeds the configured maximum speed value, the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than the configured max speed -3% of the configured max speed.
When vehicle speed exceeds configured maximum speed value the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than configured max speed -3% of configured max speed.
Configurable parameters:
Configurable parameters:
<br />
<br />
*Priority – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high.
*Priority – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.
*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeds the configured value, then the event will occur.
*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeded configured value, then the event will occur.
==Trip==
==Trip==
*'''Disable''' - disable scenario.
*'''Disable''' - disable scenario.
*'''Low Priority''' - when low priority event is triggered, device '''makes additional record''' with indication of event cause.
*'''Low Priority''' - when low priority event is triggered, device '''makes additional record''' with indication of event cause.
*'''High Priority''' - module makes additional record with High priority flag and '''sends event packet immediately''' to the server by '''GPRS'''.
*'''High Priority''' - module makes additional record with High priority flag and '''sends event packet immediately''' to the server by
'''GPRS'''.
*'''Unplug mode''' -The feature informs after the device is disconnected from the main power source.
==Static navigation==
==Static navigation==
==Digital output overcurrent recovery==
==Digital output overcurrent recovery==
The feature will attempt to recover the DOUT state when overcurrent is detected in the circuit. DOUT will be toggled ON/OFF either until overcurrent is no longer detected or a maximum of 10 times.
The feature will attempt to recover DOUT state when overcurrent is detected in the circuit. DOUT will be toggled ON/OFF either until overcurrent is no longer detected or a maximum for 10 times.<br><br>
[[Category:FTC921 Configuration]]
[[Category:FTC921 Configuration]]