215
edits
Changes
no edit summary
== Overspeeding ==
== Overspeeding ==
[[File:Overspeedinggif2.gif|alt=|right|374x374px]]
[[File:Overspeedinggif2.gif|alt=|right|374x374px]]
When vehicle speed exceeds the configured maximum speed value, the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than the configured max speed -3% of the configured max speed.
When vehicle speed exceeds configured maximum speed value the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than configured max speed -3% of configured max speed.
Configurable parameters:
Configurable parameters:
<br />
<br />
*Priority – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high.
*Priority – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.
*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeds the configured value, then the event will occur.
*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeded configured value, then the event will occur.
==Trip==
==Trip==
*'''Disable''' - disable scenario.
*'''Disable''' - disable scenario.
*'''Low Priority''' - when low priority event is triggered, device '''makes additional record''' with indication of event cause.
*'''Low Priority''' - when low priority event is triggered, device '''makes additional record''' with indication of event cause.
*'''High Priority''' - module makes additional record with High priority flag and '''sends event packet immediately''' to the server by '''GPRS'''.
*'''High Priority''' - module makes additional record with High priority flag and '''sends event packet immediately''' to the server by
'''GPRS'''.
==Unplug detection==
==Unplug detection==
[[File:Unplug2.gif|alt=|right]]
[[File:Unplug2.gif|alt=|right]]
An event will be generated when is unplugged from {{{txt_src|external power}}} or plugged back in again.
An event will be generated when is unplugged from {{{txt_src|external power}}} or plugged back in again.
'''Priority'''
'''Priority'''
*'''Disable''' - disable scenario.
*'''Disable''' - disable scenario.
*'''Low Priority''' - when low priority event is triggered, device '''makes additional record''' with indication of event cause.
*'''Low Priority''' - when low priority event is triggered, device '''makes additional record''' with indication of event cause.
*'''High Priority''' - module makes additional record with High priority flag and '''sends event packet immediately''' to the server by '''GPRS'''.
*'''High Priority''' - module makes additional record with High priority flag and '''sends event packet immediately''' to the server by
'''GPRS'''.
*'''Unplug mode''' -The feature informs after the device is disconnected from the main power source.
==Static navigation==
==Static navigation==
If the Static navigation filter is disabled, it will apply no changes to GPS data. If the Static navigation filter is enabled, it will filter changes in GPS position if no movement (configured movement source) or ignition (configured ignition source) is detected (depends on what static navigation settings are selected: movement, ignition or both sources). It allows filtering GPS jumps when an object is parked (is not moving) and GPS position is still traced.<br><br>
If the Static navigation filter is disabled, it will apply no changes to GPS data. If the Static navigation filter is enabled, it will filter changes in GPS position if no movement (configured movement source) or ignition (configured ignition source) is detected (depends on what static navigation settings are selected: movement, ignition or both sources). It allows filtering GPS jumps when an object is parked (is not moving) and GPS position is still traced.<br><br>
<br />
<br />
==Digital output overcurrent recovery==
==Digital output overcurrent recovery==
The feature will attempt to recover the DOUT state when overcurrent is detected in the circuit. DOUT will be toggled ON/OFF either until overcurrent is no longer detected or a maximum of 10 times.
The feature will attempt to recover DOUT state when overcurrent is detected in the circuit. DOUT will be toggled ON/OFF either until overcurrent is no longer detected or a maximum for 10 times.<br><br>
[[Category:FTC921 Configuration]]
[[Category:FTC921 Configuration]]