Changes

{{Template:MTB100 First start card|model=FMB910|pic=[[Image:FMB910_600X600_1.png|450px|right]]

{{Template:MTB100 First start card|model=FMB910|pic=[[Image:FMB910-side-2024-01-11.png|650px|right]]

||sim_pin=[[FMB910 Security info|'''Security info''']]

||sim_pin=[[FMB910 Security info|'''Security info''']]

|without_battery=

|without_battery=

==Installation photos==

==Installation photos==

FMB120 is the device that has internal GNSS and GSM antenna.

FMB910 is the device that has internal GNSS and GSM antenna.

<br />

<br />

Device should be mounted with the sticker view to the open sky (metal free). FMB120 area with sticker is shown in figure below:

Device should be mounted with the sticker view to the open sky (metal free). FMB910 area with sticker is shown in figure below:

<br />

<br />

[[File:FMB120_4000X4000_7.png|center|400px]]

[[File:FMB910-side-2024-01-11.png|center|400px]]

<br />

<br />

FMB1YX can be mounted under the plastic panel behind the front window, with the sticker direction to a window (sky). It is recommended to place FMB1YX behind dashboard as close to the window as possible. A good example of GNSS antenna placement is displayed in a picture below (area colored green).

FMB910 can be mounted under the plastic panel behind the front window, with the sticker / engraving direction to a window (sky). It is recommended to place FMB910 behind dashboard as close to the window as possible or in a place that is not covered with metal and has no moving parts if you are using it on a motorcycle.

<br />

<br />

SIM card should be inserted in the module while the connector is plugged off (while module has no power).  

SIM card should be inserted in the module while the connector is plugged off (while module has no power).  

<br />

<br />

[[File:FMB120_install2.jpg|center|400px]]

[[File:FMB9YX.png|center|400px]]

 

|FMB0_3_nominal=

|FMB0_3_nominal=

|FMB2_connecting_cables=

|FMB2_connecting_cables=

}}

}}

[[Category:FMB910]]

[[Category:FMB910]]