Difference between revisions of "FMB920 First Start"
m |
|||
(36 intermediate revisions by 16 users not shown) | |||
Line 1: | Line 1: | ||
− | {{Template:FMB9 First start card|model=FMB920}} | + | {{Template:FMB9 First start card|model=FMB920|pic=[[Image:FMB920-side-2024-01-11.png|650px|right]] |
+ | ||sim_pin=[[FMB920 Security info|'''Security info''']] | ||
+ | |without_battery= | ||
+ | |description=Small and smart tracker with Bluetooth® and internal backup battery}} | ||
− | + | =='''Pinout'''== | |
{| class="wikitable" | {| class="wikitable" | ||
|+ | |+ | ||
− | ! style="background: white; color: # | + | ! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| PIN NUMBER |
− | + | ! style="width:15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| PIN NAME | |
− | + | ! style="width:25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| | |
+ | DESCRIPTION | ||
|- | |- | ||
− | | style="text-align: left; background: | + | | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 1 |
− | | style="text-align: left; background: | + | | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <span style=color:#FF0000>'''VCC'''</span> (6-30)V DC (+) |
− | | style="text-align: left; background: | + | | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Power supply (6-30) V DC (+). |
|- | |- | ||
− | | style="text-align: left; background: | + | | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 2 |
− | | style="text-align: left; background: | + | | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <span style=color:#000000>'''GND''' </span>(-) |
− | | style="text-align: left; background: | + | | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Ground. |
|- | |- | ||
− | | style="text-align: left; background: | + | | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 3 |
− | | style="text-align: left; background: | + | | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <span style=color:#D8D800>'''DIN 1'''</span> |
− | | style="text-align: left; background: | + | | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Digital input, channel 1. DEDICATED FOR IGNITION INPUT |
|- | |- | ||
− | | style="text-align: left; background: | + | | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 4 |
− | | style="text-align: left; background: | + | | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <span style=color:#3B3B3B>'''AIN 1'''</span> |
− | | style="text-align: left; background: | + | | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Analog input, channel 1. Input range: 0-30 V DC. |
|- | |- | ||
− | | style="text-align: left; background: | + | | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 5 |
− | | style="text-align: left; background: | + | | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <span style=color:#E0E0E0>'''DOUT 1'''</span> |
− | | style="text-align: left; background: | + | | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | Digital output. Open collector output. Max. 3,3 A DC. |
|- | |- | ||
|} | |} | ||
− | |||
− | |||
− | {{Template: | + | {{Template:FMB First start config|model=FMB920|config_link=[[FMB920 Configuration|here]]|cfg_connect=Configurator_connect-FMB920.jpg|dc_voltage=6-30 V|led_status_link=[[FMB920 LED status]]|power_cable=power cable|family=FMB9}} |
− | https://teltonika. | + | |
+ | ==Quick start guide== | ||
+ | <youtube>https://www.youtube.com/watch?v=8Gz2R8o0F9M</youtube> | ||
+ | |||
+ | {{Template:Mounting_recommendations | ||
+ | |plugged_in= | ||
+ | |FMB2_installation_instruction= | ||
+ | |||
+ | ==Installation photos== | ||
+ | FMB920 is the device that has internal GNSS and GSM antenna. | ||
+ | <br /> | ||
+ | Device should be mounted with the sticker view to the open sky (metal free). FMB920 area with sticker is shown in figure below: | ||
+ | <br /> | ||
+ | [[File:FMB920-side-2024-01-11.png|center|400px]] | ||
+ | <br /> | ||
+ | FMB920 can be mounted under the plastic panel behind the front window, with the sticker / engraving direction to a window (sky). It is recommended to place FMB920 behind dashboard as close to the window as possible or in a place that is not covered with metal and has no moving parts if you are using it on a motorcycle. | ||
+ | <br /> | ||
+ | SIM card should be inserted in the module while the connector is plugged off (while module has no power). | ||
+ | <br /> | ||
+ | [[File:FMB9YX.png|center|400px]] | ||
+ | |||
+ | |FMB0_3_nominal= | ||
+ | |voltage={{{voltage|+6..+30}}} | ||
+ | |model=FMB920 | ||
+ | |2x6_connector= | ||
+ | |2x6_wires= | ||
+ | |wires= | ||
+ | |FMB0_3_ignition= | ||
+ | |FMB0_precautions= | ||
+ | |FMB2_connecting_cables= | ||
+ | }} | ||
+ | |||
+ | https://teltonika-gps.com/product/fmb920/ | ||
+ | |||
+ | [[Category:FMB920]] |
Latest revision as of 16:49, 1 March 2024
Main Page > Basic Trackers > FMB920 > FMB920 First StartSmall and smart tracker with Bluetooth® and internal backup battery
How to insert Micro-SIM card
- Gently remove FMB920 cover using plastic pry tool from both sides.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
- Connect the battery as shown on device. Position the battery in place where it does not obstruct other components.
- Attach device cover back. Device is ready to be connected.
![]() |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
Pinout
PIN NUMBER | PIN NAME |
DESCRIPTION |
---|---|---|
1 | VCC (6-30)V DC (+) | Power supply (6-30) V DC (+). |
2 | GND (-) | Ground. |
3 | DIN 1 | Digital input, channel 1. DEDICATED FOR IGNITION INPUT |
4 | AIN 1 | Analog input, channel 1. Input range: 0-30 V DC. |
5 | DOUT 1 | Digital output. Open collector output. Max. 3,3 A DC. |
PC Connection (Windows)
- Power-up FMB920 with DC voltage 6-30 V power supply using power cable. LED’s should start blinking, see “FMB920 LED status”.
- Connect device to computer using Micro-USB cable or Bluetooth® connection:
- Using Micro-USB cable
- You will need to install USB drivers, see "How to install USB drivers (Windows)"
- Using Bluetooth®
- FMB920 Bluetooth® is enabled by default. Turn on Bluetooth® on your PC, then select Add Bluetooth® or other device > Bluetooth®. Choose your device named – “FMB920_last_7_imei_digits”, without LE in the end. Enter default password 5555, press Connect and then select Done.
- Using Micro-USB cable
- You are now ready to use the device on your computer.
How to install USB drivers (Windows)
- Please download COM port drivers from here.
- Extract and run TeltonikaCOMDriver.exe.
- Click Next in driver installation window.
- In the following window click Install button.
- Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup.
Configuration (Windows)
At first FMB920 device will have default factory settings set. These settings should be changed according to the user's needs.
Main configuration can be performed via Teltonika Configurator software. Get the latest FMB920 Configurator version from here. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
MS .NET requirements | |||
---|---|---|---|
Operating system | MS .NET Framework version | Version | Link |
|
MS .NET Framework 5.0 | 32 and 64 bit | .NET Framework |
Downloaded Configurator will be in compressed archive. Extract it and launch Configurator.exe. After launch software language can be changed by clicking in the right bottom corner:
Configuration process begins by pressing on connected device:
After connection to Configurator Status window will be displayed:
Various Status window tabs display information about GNSS, GSM, I/O, Maintenance and etc. FMB920 has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using Save to device button. Main buttons offer following functionality:
Load from device – loads configuration from device.
Save to device – saves configuration to device.
Load from file – loads configuration from file.
Save to file – saves configuration to file.
Update firmware – updates firmware on device.
Read records – read records from device.
Reboot device – restarts device.
Reset configuration – sets device configuration to default.
Most important configurator section is GPRS – where all your server and GPRS settings can be configured and Data Acquisition – where data acquiring parameters can be configured. More details about FMB920 configuration using Configurator can be found here.
Quick SMS configuration
Default configuration has optimal parameters present to ensure best performance of track quality and data usage.
Quickly set up your device by sending this SMS command to it:
" setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0"
GPRS settings:
- 2001 – APN
- 2002 – APN username (if there are no APN username, empty field should be left)
- 2003 – APN password (if there are no APN password, empty field should be left)
Server settings:
- 2004 – Domain
- 2005 – Port
- 2006 – Data sending protocol (0 – TCP, 1 – UDP)
Note: Before SMS text, two space symbols should be inserted.
After successful SMS configuration, FMB920 device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator or SMS parameters.
Quick start guide
Mounting recommendations
- Connecting wires
- Wires should be fastened to stable wires or other non-moving parts. Any heat emitting and/or moving objects should be kept away from the wires.
- There should be no exposed wires. If factory isolation was removed while connecting wires, the isolation material should be applied.
- If the wires are placed in the exterior or in places where they can be damaged or exposed to heat, humidity, dirt, etc., additional isolation should be applied and the wires should not be loose.
- Wires cannot be connected to the board computers or control units.
- Connecting power source
- Be sure that after the car computer goes to sleep mode, power might be still available on the power wires. Depending on car, this may happen in 5 to 30 minutes period.
- When module is connected, measure voltage again to make sure it did not decrease.
- It is recommended to connect to the main power cable in the fuse box.
- 3 A, 125 V external fuse shall be used.
- Connecting ignition wire
- Be sure to check if it is a real ignition wire i. e. power does not disappear after starting the engine.
- Check if this is not an ACC wire (when key is in the first position, most of the vehicle electronics are available).
- Check if power is still available when you turn off any of vehicles devices.
- Ignition is connected to the ignition relay output. As alternative, any other relay, which has power output when ignition is on, may be chosen.
- Connecting ground wire
- Ground wire is connected to the vehicle frame or metal parts that are fixed to the frame.
- If the wire is fixed with the bolt, the loop must be connected to the end of the wire.
- For better contact scrub paint from the spot where loop is going to be connected.
![]() |
PAY ATTENTION! Connecting the power supply must be carried out in a very low impedance point of on-board vehicle network. These points in the car are the battery terminals. Therefore, we recommend connecting the power of FMB920 (GND and POWER wires) directly to the battery terminals. Another valid option is to connect the wires to the main POWER cable inside the fuse box (if there is none, then to the power supply where the fuses of vehicle’s computer are), GND wire must be connected in a special point, designed to connect GND vehicle computer. Connecting the GND at an arbitrary point to the mass of the car is unacceptable, as static and dynamic potentials on the line GND will be unpredictable, which can lead to unstable FMB920 operation and even its failure. |
Installation photos
FMB920 is the device that has internal GNSS and GSM antenna.
Device should be mounted with the sticker view to the open sky (metal free). FMB920 area with sticker is shown in figure below:
FMB920 can be mounted under the plastic panel behind the front window, with the sticker / engraving direction to a window (sky). It is recommended to place FMB920 behind dashboard as close to the window as possible or in a place that is not covered with metal and has no moving parts if you are using it on a motorcycle.
SIM card should be inserted in the module while the connector is plugged off (while module has no power).
Safety information
This message contains information on how to operate FMB920 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!
- The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed voltage range is +6..+30V DC.
- To avoid mechanical damage, it is advised to transport the device in an impact-proof package. Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.
- When connecting the connection (1x5) cables to the vehicle, the appropriate jumpers of the vehicle power supply should be disconnected.
- Before unmounting the device from the vehicle, the 1x5 connection must be disconnected.
- The device is designed to be mounted in a zone of limited access, which is inaccessible to the operator. All related devices must meet the requirements of EN 60950-1 standard.
- The device FMB920 is not designed as a navigational device for boats.
Precautions