Wiki Knowledge Base | Teltonika GPS

Changes

FMB225 First Start (view source)

Revision as of 16:28, 20 March 2024

536 bytes removed ,  20 March
no edit summary
Line 1: Line 1: −
{{Template:FMX2YX First start card withoutSD|model=FMB225|description=GNSS/GSM/Bluetooth tracker with external GNSS, internal GSM antennas, RS232, RS485 interfaces and internal battery|pic=[[Image:FMB225_600X600_1.png|400px|right]]|sim_type=|sim_pin=[[FMB225 Security info|'''Security info''']]
+
{{Template:FMX2YX First start card withoutSD|model=FMB225|Image_SIM_insertion=[[Image:FMX2YX_SIM_insert_FMC230.png|280px]]|description=GNSS/GSM/Bluetooth® tracker with internal GNSS, internal GSM antennas, RS232, RS485 interfaces and internal battery|pic=[[Image:FMB225-TAIXO-side-2023-12-28.png|650px|right]]|sim_type=|sim_pin=[[FMB225 Security info|'''Security info''']]
 
|sim_insert_pic1=FMB122-Battery-Sim-1.png
 
|sim_insert_pic1=FMB122-Battery-Sim-1.png
 
|sim_insert_pic2=FMB122-Battery-Sim-2.png
 
|sim_insert_pic2=FMB122-Battery-Sim-2.png
Line 7: Line 7:     
== '''Battery placement after complete device disassembling''' ==
 
== '''Battery placement after complete device disassembling''' ==
−
[[File:Battery placement case.png|left|313x313px]]
+
[[File:FMX2YX Battery placement case FM.png|left|313x313px]]
−
[[File:Pcb placement case.png|right|frameless|326x326px]]
+
[[File:FMX2YX Pcb placement case.png|right|frameless|326x326px]]
−
<br />
  −
<br />
   
<br />
 
<br />
 
<br />
 
<br />
Line 16: Line 14:  
# Connect battery to the PCB.
 
# Connect battery to the PCB.
 
# Gently place PCB into the bottom case.
 
# Gently place PCB into the bottom case.
 +
<br />
 +
<br />
 +
<br />
 +
<br />
 +
<br />
 +
<br />
 
<br />
 
<br />
 
<br />
 
<br />
Line 84: Line 88:  
        
 
        
   −
{{Template:FMB First start config|model=FMB125|config_link=[[FMB225 Configuration|here]]|cfg_connect=Configurator_connect-FMB125.jpg|dc_voltage=10-30 V|led_status_link=[[FMB225 LED status]]|family=FMB1}}
+
{{Template:FMB First start config|model=FMB225|config_link=[[FMB225 Configuration|here]]|cfg_connect=Configurator_connect-FMB225.jpg|dc_voltage=10-30 V|led_status_link=[[FMB225 LED status]]|family=FMB1}}
      Line 92: Line 96:  
==Installation photos==
 
==Installation photos==
   −
FMB225 is the device that has internal GNSS and GSM antenna.
+
Device should be mounted with the sticker view to the open sky.
−
<br />
  −
Device should be mounted with the sticker view to the open sky (metal free). FMB225 area with sticker is shown in figure below:
  −
<br />
  −
[[File:FMB225_4000X4000_7.png|center|400px]]
  −
<br />
  −
FMB225 is the device that have external GNSS antenna and internal GSM antenna.When placing GNSS antenna:
  −
<br />
  −
• Avoid easily reached places.
  −
<br />
  −
• Avoid placement under metal surfaces.
  −
<br />
  −
• GNSS antenna must be placed so its state is as horizontal as possible (if antenna is leant more than 30 degrees, it is considered incorrect mounting).
  −
<br />
  −
• GNSS antenna cable cannot be bent more than 80 degrees.
  −
<br />
  −
• GNSS antenna must be placed sticker facing down
   
<br />
 
<br />
−
[[File:FMB120_install3.jpg|center|400px]]
+
[[File:FMB225-TAIXO-side-2023-12-28.png|center|600px]]
 
<br />
 
<br />
−
FMB1YX can be mounted under the plastic panel behind the front window, with the sticker direction to a window (sky). It is recommended to place FMB1YX behind dashboard as close to the window as possible. A good example of GNSS antenna placement is displayed in a picture below (area colored green).
+
FMB225 device should be mounted with the device logo view to the open sky for the best device performance with not less than ¾ of metal free area. FMB225 has IP67 protection class. Top performance is reached if mounted outside of the vehicle.
 +
The device has adhesive tape to securely place the device.
 
<br />
 
<br />
 
SIM card should be inserted in the module while the connector is plugged off (while module has no power).  
 
SIM card should be inserted in the module while the connector is plugged off (while module has no power).  
 
<br />
 
<br />
−
[[File:FMB120_install2.jpg|center|400px]]
+
[[File:FMB230_install2.jpg|center|400px]]
    
|FMB0_3_nominal=
 
|FMB0_3_nominal=
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/70303...96848"