Changes

== Overspeeding ==

== Overspeeding ==

[[File:Overspeedinggif2.gif|alt=|right|374x374px]]

[[File:Overspeedinggif2.gif|alt=|right|374x374px]]

When vehicle speed exceeds configured maximum speed value the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than configured max speed -3% of configured max speed.  

When vehicle speed exceeds the configured maximum speed value, the scenario is activated, and an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Detected speed has to be greater than configured max speed +3% of configured max speed for the overspeeding event to start. To stop overspeeding event detected speed has to be lower than the configured max speed -3% of the configured max speed.  

Configurable parameters:

Configurable parameters:

<br />

<br />

*Priority – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.

*Priority – defines the priority of overspeeding scenario: 0 – disabled, 1 – low, 2 – high.

*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeded configured value, then the event will occur.

*Max speed – it is the maximum allowed speed that can be reached. If the speed exceeds the configured value, then the event will occur.

==Trip==

==Trip==

*'''Disable''' - disable scenario.

*'''Disable''' - disable scenario.

*'''Low Priority''' - when low priority event is triggered, device '''makes additional record''' with indication of event cause.

*'''Low Priority''' - when low priority event is triggered, device '''makes additional record''' with indication of event cause.

*'''High Priority''' - module makes additional record with High priority flag and '''sends event packet immediately''' to the server by

*'''High Priority''' - module makes additional record with High priority flag and '''sends event packet immediately''' to the server by '''GPRS'''.

'''GPRS'''.

*'''Unplug mode'''  -The feature informs after the device is disconnected from the main power source.

==Static navigation==

==Static navigation==