104
edits
Changes
→Static navigation
*'''Disable''' - disable scenario.
*'''Disable''' - disable scenario.
*'''Low Priority''' - when low priority event is triggered, device '''makes additional record''' with indication of event cause.
*'''Low Priority''' - when low priority event is triggered, device '''makes additional record''' with indication of event cause.
*'''High Priority''' - module makes additional record with High priority flag and '''sends event packet immediately''' to the server by
*'''High Priority''' - module makes additional record with High priority flag and '''sends event packet immediately''' to the server by '''GPRS'''.
'''GPRS'''.
<br>
<br>
==Unplug detection==
==Unplug detection==
[[File:Unplug2.gif|alt=|right]]
[[File:Unplug2.gif|alt=|right]]
An event will be generated when is unplugged from {{{txt_src|external power}}} or plugged back in again.
An event will be generated when is unplugged from {{{txt_src|external power}}} or plugged back in again.
'''Priority'''
'''Priority'''
*'''Low Priority''' - when low priority event is triggered, device '''makes additional record''' with indication of event cause.
*'''Low Priority''' - when low priority event is triggered, device '''makes additional record''' with indication of event cause.
*'''High Priority''' - module makes additional record with High priority flag and '''sends event packet immediately''' to the server by '''GPRS'''.
*'''High Priority''' - module makes additional record with High priority flag and '''sends event packet immediately''' to the server by '''GPRS'''.
<br>
<br>
<br>
<br>
==Static navigation==
==Static navigation==
If the Static navigation filter is disabled, it will apply no changes to GPS data. If the Static navigation filter is enabled, it will filter changes in GPS position if no movement (configured movement source) or ignition (configured ignition source) is detected (depends on what static navigation settings are selected: movement, ignition or both sources). It allows filtering GPS jumps when an object is parked (is not moving) and GPS position is still traced.<br><br>
If the Static navigation filter is disabled, it will apply no changes to GPS data. If the Static navigation filter is enabled, it will filter changes in GPS position if no movement (configured movement source) or ignition (configured ignition source) is detected (depends on what static navigation settings are selected: movement, ignition or both sources). It allows filtering GPS jumps when an object is parked (is not moving) and GPS position is still traced.<br><br>
<br />
<br />
<br>
<br>
==Digital output overcurrent recovery==
==Digital output overcurrent recovery==
The feature will attempt to recover DOUT state when overcurrent is detected in the circuit. DOUT will be toggled ON/OFF either until overcurrent is no longer detected or a maximum for 10 times.<br><br>
The feature will attempt to recover the DOUT state when overcurrent is detected in the circuit. DOUT will be toggled ON/OFF either until overcurrent is no longer detected or a maximum of 10 times.
[[File:Digital Output Overcurrent Recovery.png|thumb]]
[[Category:FTC921 Configuration]]
[[Category:FTC921 Configuration]]