Changes

Line 33: Line 33:  
'''Open link timeout (s)'''
 
'''Open link timeout (s)'''
   −
*The parameter is used to define a timeout between the fleet management device and the server. If the device has sent all records, device holds the link for duration of the configured timeout. “Open link timeout” will refresh after device sends a new record. If there is a need to keep a constant link with a server, increasing the value of the parameter is needed.
+
*The parameter is used to define a timeout between the fleet management device and the server. If the device has sent all records, the device holds the link for the duration of the configured timeout. The “Open link timeout” timer will refresh after the device sends a new record. If there is a need to keep a constant link with a server, increasing the value of the parameter is needed.
    
'''Response timeout (s)'''
 
'''Response timeout (s)'''
*Is used to set a period of time waiting for the response from the server-side. If there is no response from the server during the timeout, the device will close the link and according to device configuration resend the same packet
+
*It is used to set a period waiting for the response from the server-side. If there is no response from the server during the timeout, the device will close the link and according to device configuration resend the same packet
    
'''Keep-alive ping timeout (s)'''
 
'''Keep-alive ping timeout (s)'''
*enables network ping after timeout to prevent link close by operator. For example, if the operator closes the active link after 15 minutes when no data is sent, you can set the "network ping" timeout to 10 minutes then the device sends a 0xFF byte to server to keep the link open. Keep-alive ping timeout should be always lower than Open Link Timeout.
+
*Enables network ping after a timeout to prevent the link from closing by the operator. For example, if the operator closes the active link after 15 minutes when no data is sent, you can set the "network ping" timeout to 10 minutes where the device sends a 0xFF byte to the server to keep the link open. Keep-alive ping timeout should be always lower than Open Link Timeout.
 
<br>
 
<br>
 
<br>
 
<br>