Changes

EYE BEACON / BTSID1 (view source)

Revision as of 11:20, 29 May 2024

7,082 bytes added , 29 May

→‎Documents

Line 1: Line 1:

__TOC__

−

==Introduction==

+

==Introduction==

Wireless solutions open up new horizons for your business and help to keep an eye on your assets. Discover our

−

brand-new and certified ~~Bluetooth~~ Low Energy ID beacon model from Teltonika with robust waterproof

+

brand-new and certified Bluetooth® Low Energy ID beacon model from Teltonika with robust waterproof

casing and a long-lifetime battery. The model designed for a low-cost fast and easy configuration and integration to

save precious time, resources, and ensure accountability.

−

[[File:~~EYE device~~.png|center|frameless|1157x1157px]]

+

[[File:BTSID1-datasheet-2023-12-18.2.png|center|frameless|1157x1157px]]

==About BTSID1==

Line 74: Line 74:

! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |

|-

−

| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |~~Bluetooth~~

+

| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Bluetooth®

−

| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |~~Bluetooth~~ 4.2 compliant,

+

| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Bluetooth® 4.2 compliant,

−

~~Bluetooth~~ 5.2 certified

+

Bluetooth® 5.2 certified

|-

| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Range

Line 124: Line 124:

===Dimensions===

[[File:Eye dimensions.png]]

+

==Value-adding Features==

+

===Hibernate mode===

+

Hibernated mode means that the EYE device is OFF when shipping from the factory, preserving battery life.

+

PLEASE NOTE that EYE devices are available in two modes: factory-activated (ON) or Hibernated (OFF). You may order the device version which better suits your needs. Order codes are described on [https://teltonika-gps.com/products/accessories/sensors-beacons/eye eye page]

+

====Value of hibernate mode====

+

Hibernated versions of EYE devices simplify stock management for our partners while maximizing battery life. 1. '''Accelerated delivery times:'''

+

By stocking up on hibernated EYE devices, you ensure readiness to deploy EYE devices with full battery capacity at any moment. This proactive approach provides fastest possible service, increases your reputation for efficiency and positions you as an industry frontrunner, enhancing your competitive edge.

+

2. '''Mitigated project risks:'''

+

In scenarios where projects encounter unforeseen challenges, our hibernated EYE devices offer a buffer. Hibernate feature allows to safeguard your investments and potential revenue streams. This means that even if projects encounter delays or complications, you can still deploy EYE devices with full battery capacity, ensuring optimal performance when the time is right.

+

====How to activate hibernated eye device?====

+

Attach any magnet to sleeping device and wait for LED to blink.

+

'''NOTE: ANY MAGNET CAN BE USED'''

+

[[File:520746 Magnet EYE gif v1.6-min.gif|frameless|684x684px]]

+

Now device is discoverable, scannable, connectable via BLE.

+

====How to send the device to hibernate mode?====

+

If you want to put the EYE device back to hibernate mode after accidental activation or simply pause its use, you may do that following steps below:

+

Step 1. While connected and in overview tap "Send device to sleep":

+

Step 2. Confirm your selection:

+

Step 3. Wait for EYE App to disconnect:

+

[[File:Device screen 1.2.8 2.jpg|400x400px]][[File:Screenshot 20230509 173323 EYE APP.jpg|400x400px]][[File:Screenshot 20230512 164509 Gallery.jpg|400x400px]]

+

====Can All devices hibernate?====

+

1. All EYE Sensors with firmware version starting from 1.2.9.R.8 can hibernate.

+

2. Only new EYE Beacons bought with order codes that have hardware modification can hibernate standard codes are available in [https://teltonika-gps.com/products/accessories/sensors-beacons/eye eye page], for special order codes consult your sales manager.

==Mounting recomendations==

Line 143: Line 181:

===Eye App Overview===

−

'''With the application you will be able to scan for visible Teltonika EYE devices, check their statuses or connect for configuration or firmware ~~update~~.'''

+

'''With the application you will be able to scan for visible Teltonika EYE devices, check their statuses, connect for configuration, download it or update the firmware.'''

−

{|

|- align="TOP"

+

|[[File:1.1.1.jpg]]

+

|

+

|

+

|

+

|[[File:2.1.1.jpg]]

+

|

+

|

−

|[[File:~~Detailed list - collapsed(2)~~.jpg~~|border|360x640px|none~~]]

+

|[[File:3.1.1.jpg]]

|

−

~~|[[File:Overview - without update (beacon)(2).png|border|360x640px|none]]~~

|

−

~~|[[File:Basic settings(2).png|right|border|360x640px]]~~

|

−

|[[File:~~Advance settings~~ 4.~~png|right|border|360x640px~~]]

+

|[[File:4.1.1.jpg]]

|}

+

[[File:Frame 115.png|bottom|frameless|upright=0.2|link=|alt=]] '''Devices in view''': In this window you will see all visible devices. You have options to see devices in Short list [[File:Shortlist.jpg|30px]] or in default list. When looking at devices in default list you will be able to open Detailed view [[File:Detailed.jpg]] of devices and check transmitted data statuses. Additionaly if you are looking for specific devices you will be able to use Search [[File:Search button eye app.jpg|30px]] function to filter search options. When in this window select a device of your choice to connect and after passing pin code (default pin code is 123456) you will go to device overview window

−

[[File:Group 125.png|baseline|frameless|upright=0.2|link=|alt=]]'''Overview window''': In overview window you can see device details, check firmware version and update if available , go to device configuration settings. If you select to Configure device new window will open with Basic and Advanced settings.

+

[[File:Group 125.png|baseline|frameless|upright=0.2|link=|alt=]]'''Overview window:''' In overview window you can see device details, check firmware version and update if available, go to device configuration settings and download the configuration. If you select to Configure device new window will open with Basic and Advanced settings. Other actions include changing the device PIN code and putting the device to sleep. A device in sleep mode will no longer be findable or connectable via the app. To wake it up, you need to attach a magnet and look for a green LED flashing.

−

~~ ~~

−

~~ ~~

−

~~[[File:Group 116.png|sub|frameless|upright=0.2|link=|alt=]]'''Configure window''': In this window you can check~~ and ~~change~~ device ~~configuration settings~~. ~~In main tab Basic Settings you can change main settings~~. ~~Change Device name~~, ~~Power signal strength, Advertising interval~~ and ~~Packet transmition type*. For more settings go to Advanced settings tab to enable various events~~.

+

[[File:Group 116.png|sub|frameless|upright=0.2|link=|alt=]]'''Configure window''': In this window you can check and change device configuration settings. In main tab Basic Settings you can change main settings. Change Device name, Power signal strength, Advertising interval and Packet transmission type*. For more settings go to Advanced settings tab to enable various events.

[[File:Group 117.png|sub|frameless|upright=0.2|link=|alt=]]'''Advanced configuration window''': Beacon information (iBeacon ID*, Eddystone ID). UUID/MINOR/MAJOR parameter can be changed for iBeacon ID*. Namespace ID/Instance ID can be changed for Eddystone ID

Line 181: Line 222:

===Teltonika configurator (Base firmware)===

−

If you have firmware / configurator which does not support EYE Beacon tab in ~~Bluetooth~~ 4.0 section, then you can use Beacon list section of the configurator to scan available EYE Beacons.

+

If you have firmware / configurator which does not support EYE Beacon tab in Bluetooth® 4.0 section, then you can use Beacon list section of the configurator to scan available EYE Beacons.

Below are short instructions which show how we recommend configuring the device to Enable the Beacon functionality for testing.

Line 188: Line 229:

#In System Settings Enable [[Codec#Codec_8_Extended|Codec8 Extended]];

−

#In [[~~FMB120_Bluetooth_settings~~|~~Bluetooth~~]] settings Enable ~~Bluetooth~~, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise ~~Bluetooth~~ will be disabled;

+

#In [[FMB120_Bluetooth®_settings|Bluetooth®]] settings Enable Bluetooth®, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth® will be disabled;

−

#In [[~~FMB120_Bluetooth_4~~.0_settings|~~Bluetooth~~ 4.0]] settings, set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;

+

#In [[FMB120_Bluetooth®_4.0_settings|Bluetooth® 4.0]] settings, set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;

#In [[FMB120_Beacon_List|Beacon list]] settings, configure Beacon Detection as "All" and Beacon Record as "Eventual". This will detect all surrounding Beacons and create Beacon records every 30 seconds.

Line 196: Line 237:

===Teltonika configurator new functionalities (Evaluation firmware)===

−

'''~~Bluetooth~~ 4.0'''

+

'''Bluetooth® 4.0'''

Line 205: Line 246:

* '''BLE Scan Duration''' - Sensors data reading time. Recommended value 30.

* '''Scan retries until error''' - Scan retries count, till start to show the value as Error '3000' - sensor disconnected. Recommended value 30.

−

* '''BT Power Level''' - Telematics device ~~Bluetooth~~ power level setting.

+

* '''BT Power Level''' - Telematics device Bluetooth® power level setting.

* '''BLE Broadcasting service ID''' - Telematics device can broadcast configured ID.

* ''' BLE connection control''' - Connection mode settings. If broadcasting ID is configured, parameter should be set to Prohibit.

Line 307: Line 348:

|2 byte unsigned integer

|EYE Beacon battery voltage value in mV

+

|-

+

|15

+

|EYE Beacon MAC

+

|1 byte unsigned integer

+

|Device’s MAC address is sent if it's enabled in FMB configuration

|-

|}

Line 319: Line 365:

===Protocol description===

−

At the highest-level ~~Bluetooth~~ LE advertising packet consists of Advertising Indication and Scan Response. Both packets can be maximum of 31 bytes in size. Advertising Indication packet is always broadcasted when Scan Response is broadcasted only if Observer device requests it by using Active Scan.

+

At the highest-level Bluetooth® LE advertising packet consists of Advertising Indication and Scan Response. Both packets can be maximum of 31 bytes in size. Advertising Indication packet is always broadcasted when Scan Response is broadcasted only if Observer device requests it by using Active Scan.

BTSMP1 uses Advertising Indication to send beacon data which can be configured to select between iBeacon and Eddystone protocols or to be disabled at all. In that case, data which is shown as Scan Response in protocol overview will be sent as Advertising Indication without Scan Response following it.

Line 357: Line 403:

===GATT Characteristics===

{| class="wikitable" style="width: 100%; background-color: white; border-bottom: 2px solid #0054A6;"

+

|-

−

! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 20px;" |Name

+

−

! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 280px;" |Service UUID

+

! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 20px;" | Name

−

! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 280px;" |Characteristic UUID

+

−

! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6;" |Data Type

+

! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 280px;" | Service UUID

−

! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6;" |Min

+

−

! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6;" |Max

+

! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 280px;" | Characteristic UUID

−

! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 120px" |Default Value

+

−

! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6;" |Notes

+

! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6;" | Data Type

+

! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6;" | Min

+

! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6;" | Max

+

! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 120px" | Default Value

+

! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6;" | Notes

+

|-

−

|Device Name||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0016-7df2-4d4e-8e6d-c611745b92e9||ASCII||0||11||Unique for each device||-

+

| Device Name || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0016-7df2-4d4e-8e6d-c611745b92e9 || ASCII || 0 || 12 || Unique for each device || -

+

|-

−

|Tx Power Lever||1804||~~00002a07-0000-1000-8000-00805f9b34fb~~||SINT8||-14||8||2||Possible values: -14, -11, -8, -5, -2, 2, 4, 8

+

| Tx Power Lever || 1804 || 2a07 || SINT8 || -14 || 8 || 2 || Possible values: -14, -11, -8, -5, -2, 2, 4, 8

+

|-

−

|Protocol Type||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0001-7df2-4d4e-8e6d-c611745b92e9||UINT8||0||4||1 for EYE_Beacon,

+

−

4 for EYE_Sensor

+

| Protocol Type|| e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0001-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 4*

−

|0 - iBeacon

+

−

1 - ~~EddyStone~~

+

*Max 2 with 01.02.10+ firmware

+

| 1 for EYE_Beacon,

+

4 for EYE_Sensor*

+

*with 01.02.10+ firmware 1 for both EYE_Beacon & EYE_Sensor

+

| 0 - iBeacon

+

1 - Eddystone

2 - EYE Sensor

−

3 - iBeacon + EYE Sensor

+

3 - iBeacon + EYE Sensor*

−

4 - ~~Eddsytone~~ + EYE Sensor

+

4 - Eddystone + EYE Sensor*

+

*01.02.10+ sensors are enabled over ''Activate / Deactivate Sensors''

|-

−

|~~Advertising Interval|~~|e61c0000-7df2-4d4e-8e6d-c611745b92e9|~~|e61c0002~~-7df2-4d4e-8e6d-c611745b92e9||~~UINT16~~||20|~~|10000||1000||miliseconds~~

+

|Activate / Deactivate Sensors*

+

*from 01.02.10+ firmware

+

|e61c0000-7df2-4d4e-8e6d-c611745b92e9

+

|e61c0021-7df2-4d4e-8e6d-c611745b92e9

+

|UINT8

+

|0

+

|15

+

(0b1111)

+

|4 (0b0100) for EYE_Beacon,

+

15 (0b1111) for EYE_Sensor

+

|(LSb) bit 0 – Temperature

+

Bit 1 – Humidity

+

Bit 2 – Magnetic

+

Bit 3 - Movement

+

E.g. EYE_Sensor disabled movement & enabled temperature, humidity, magnetic sensors 7 (0b0111)

|-

−

|~~Sub~~ Advertising Interval||e61c0000-7df2-4d4e-8e6d-c611745b92e9||~~e61c0003~~-7df2-4d4e-8e6d-c611745b92e9||UINT16||20||~~1000~~||~~100~~||~~Used by repeats,~~ miliseconds

+

| Advertising Interval|| e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0002-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 1000 || 10000 || 5000 || miliseconds

+

|-

−

|Advertising Repeats||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0004-7df2-4d4e-8e6d-c611745b92e9||UINT16||1||10||1||Repeats work only if Advertising Interval is more than 2000 ms and Repeats set to more than 1

+

| Sub Advertising Interval || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0003-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 20 || 1000 || 100 || Used by repeats, miliseconds

+

|-

+

| Advertising Repeats || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0004-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 1 || 10 || 1 || Repeats work only if Advertising Interval is more than 2000 ms and Repeats set to more than 1

+

|-

−

|iBeacon ID||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0005-7df2-4d4e-8e6d-c611745b92e9||BYTE ARRAY||20 bytes||20 bytes||Unique for each device||16 B - UUID

+

−

2 B - major

+

| iBeacon ID || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0005-7df2-4d4e-8e6d-c611745b92e9 || BYTE ARRAY || 20 bytes || 20 bytes || Unique for each device || 16 B - UUID 2 B - major 2 B - minor

−

2 B - minor

+

|-

−

|Eddystone ID||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0006-7df2-4d4e-8e6d-c611745b92e9||BYTE ARRAY||16 bytes||16 bytes||Unique for each device||10 B - Namespace

+

−

6 B - Instance

+

| Eddystone ID || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0006-7df2-4d4e-8e6d-c611745b92e9 || BYTE ARRAY || 16 bytes || 16 bytes || Unique for each device || 10 B - Namespace 6 B - Instance

|-

|Command

|e61c0000-7df2-4d4e-8e6d-c611745b92e9

|e61c0007-7df2-4d4e-8e6d-c611745b92e9

−

|

+

| colspan="5" |[[EYE SENSOR / BTSMP1#Command characteristic|Command characteristic]]

−

|

−

|

−

|

−

|

|-

−

|Password||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0008-7df2-4d4e-8e6d-c611745b92e9||BYTE ARRAY||4 bytes||4 bytes||123456||Always 6 Digits

+

|Password||e61c0000-7df2-4d4e-8e6d-c611745b92e9|| e61c0008-7df2-4d4e-8e6d-c611745b92e9 ||BYTE ARRAY|| 6 bytes||6 bytes||123456||Always 6 Digits

+

|-

−

|Sensor Interval

+

−

|e61c0000-7df2-4d4e-8e6d-c611745b92e9

+

|Sensor Interval||e61c0000-7df2-4d4e-8e6d-c611745b92e9|| e61c0009-7df2-4d4e-8e6d-c611745b92e9||UINT16||0||10000||1000||miliseconds

−

|e61c0009-7df2-4d4e-8e6d-c611745b92e9

+

−

|UINT16

−

|0

−

|10000

−

|1000

−

|miliseconds

|-

−

|Event Interval

+

−

|e61c0000-7df2-4d4e-8e6d-c611745b92e9

+

|Event Interval||e61c0000-7df2-4d4e-8e6d-c611745b92e9|| e61c000a-7df2-4d4e-8e6d-c611745b92e9||UINT16||0||10000||1000 || miliseconds

−

|e61c000a-7df2-4d4e-8e6d-c611745b92e9

+

−

|UINT16

−

|0

−

|10000

−

|1000

−

|miliseconds

|-

−

|Event Duration

+

−

|e61c0000-7df2-4d4e-8e6d-c611745b92e9

+

|Event Duration||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c000b-7df2-4d4e-8e6d-c611745b92e9||UINT8||0||30 ||30||seconds

−

|e61c000b-7df2-4d4e-8e6d-c611745b92e9

+

−

|UINT8

−

|0

−

|30

−

|30

−

|seconds

|-

−

~~|Temperature Event~~

−

~~|e61c0000-7df2-4d4e-8e6d-c611745b92e9~~

−

~~|e61c000c-7df2-4d4e-8e6d-c611745b92e9~~

−

~~|UINT8~~

−

|0

−

|2

−

|2

−

~~|0 - on entrance~~

−

~~1 - on exit~~

−

2 - no event

+

| Temperature Event||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c000c-7df2-4d4e-8e6d-c611745b92e9||UINT8 ||0||2|| 2||0 - on entrance 1 - on exit 2 - no event

+

|-

−

|Temperature Low

+

−

|e61c0000-7df2-4d4e-8e6d-c611745b92e9

+

|Temperature Low||e61c0000-7df2-4d4e-8e6d-c611745b92e9 ||e61c000d-7df2-4d4e-8e6d-c611745b92e9||INT8||-40|| 85||-20||celsius

−

|e61c000d-7df2-4d4e-8e6d-c611745b92e9

+

−

|INT8

−

| -40

−

|85

−

| -20

−

|celsius

|-

−

|Temperature High

+

−

|e61c0000-7df2-4d4e-8e6d-c611745b92e9

+

|Temperature High|| e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c000e-7df2-4d4e-8e6d-c611745b92e9||INT8||-40||85 ||50||celsius

−

|e61c000e-7df2-4d4e-8e6d-c611745b92e9

+

−

|INT8

−

| -40

−

|85

−

|50

−

|celsius

|-

−

~~|Humidity Event~~

−

~~|e61c0000-7df2-4d4e-8e6d-c611745b92e9~~

−

~~|e61c000f-7df2-4d4e-8e6d-c611745b92e9~~

−

~~|UINT8~~

−

|0

−

|2

−

|2

−

~~|0 - on entrance~~

−

~~1 - on exit~~

−

2 - no event

+

| Humidity Event||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c000f-7df2-4d4e-8e6d-c611745b92e9||UINT8||0||2||2||0 - on entrance 1 - on exit 2 - no event

+

|-

−

|Humidity Low

+

−

|e61c0000-7df2-4d4e-8e6d-c611745b92e9

+

|Humidity Low||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0010-7df2-4d4e-8e6d-c611745b92e9 || UINT8||0||100||15||%

−

|e61c0010-7df2-4d4e-8e6d-c611745b92e9

+

−

|UINT8

−

|0

−

|100

−

|15

−

|%

|-

−

|Humidity High

+

−

|e61c0000-7df2-4d4e-8e6d-c611745b92e9

+

|Humidity High ||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0011-7df2-4d4e-8e6d-c611745b92e9||UINT8||0||100||50||%

−

|e61c0011-7df2-4d4e-8e6d-c611745b92e9

+

−

|UINT8

−

|0

−

|100

−

|50

−

|%

|-

−

~~|Movement Event~~

−

~~|e61c0000-7df2-4d4e-8e6d-c611745b92e9~~

−

~~|e61c0012-7df2-4d4e-8e6d-c611745b92e9~~

−

~~|UINT8~~

−

|0

−

|2

−

|2

−

~~|0 - on entrance~~

−

~~1 - on exit~~

−

2 - no event

+

|Movement Event||e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0012-7df2-4d4e-8e6d-c611745b92e9||UINT8||0||2||2||0 - on entrance 1 - on exit 2 - no event

+

|-

−

|Movement Start

+

−

|e61c0000-7df2-4d4e-8e6d-c611745b92e9

+

|Movement Start ||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0013-7df2-4d4e-8e6d-c611745b92e9|| UINT16||0||300||5||seconds

−

|e61c0013-7df2-4d4e-8e6d-c611745b92e9

+

−

|UINT16

−

|0

−

|300

−

|5

−

|seconds

|-

−

|Movement Stop

+

−

|e61c0000-7df2-4d4e-8e6d-c611745b92e9

+

|Movement Stop||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0014-7df2-4d4e-8e6d-c611745b92e9|| UINT16||0||300||5 ||seconds

−

|e61c0014-7df2-4d4e-8e6d-c611745b92e9

+

−

|UINT16

−

|0

−

|300

−

|5

−

|seconds

|-

−

~~|Magnetic Event~~

−

~~|e61c0000-7df2-4d4e-8e6d-c611745b92e9~~

−

~~|e61c0015-7df2-4d4e-8e6d-c611745b92e9~~

−

~~|UINT8~~

−

|0

−

|2

−

|2

−

~~|0 - on entrance~~

−

~~1 - on exit~~

−

2 - no event

+

|Magnetic Event||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0015-7df2-4d4e-8e6d-c611745b92e9||UINT8||0||2|| 2||0 - on entrance 1 - on exit 2 - no event

|-

−

|Password Counter

+

| Password Counter

|e61c0000-7df2-4d4e-8e6d-c611745b92e9

−

|e61c0019-7df2-4d4e-8e6d-c611745b92e9

+

| e61c0019-7df2-4d4e-8e6d-c611745b92e9

|UINT8

|0 (counter)

|10 (counter)

−

|0

+

| 0

|Byte 0 – counter,

+

Byte 1 and 2 - timeout

|-

Line 545: Line 565:

|e61c0000-7df2-4d4e-8e6d-c611745b92e9

|e61c0020-7df2-4d4e-8e6d-c611745b92e9

−

|UINT8

+

| UINT8

|8 bytes

Line 559: Line 579:

|1

|0 – sleep disabled,

+

1 – sleep enabled

|-

Line 567: Line 588:

|0

|15

+

(0b1111)

|15

+

(0b1111)

|(LSb) bit 0 – Temperature

+

Bit 1 – Humidity

Line 584: Line 608:

|300

|30

−

|WakeUp Advertising

+

|WakeUp Advertising

+

Spam Duration in seconds

|-

Line 591: Line 616:

|e61c0023-7df2-4d4e-8e6d-c611745b92e9

|INT8

−

| -100

+

|<nowiki>-100</nowiki>

|127

−

|127

+

| 127

−

|RSSI value in dBm

+

|RSSI value in dBm

+

127 – Use default calib. table

|-

−

|Manufacturer||180A||2A29||BYTE ARRAY||-||-||Not Configurable||Read Only. Ex. "Teltonika"

+

|Manufacturer||180A||2A29||BYTE ARRAY||-||-||Not Configurable ||Read Only. Ex. "Teltonika"

+

|-

−

|Model||180A||2A24||BYTE ARRAY||-||-||Not Configurable||Read Only. Ex. "BTSID1"

+

| Model|| 180A||2A24|| BYTE ARRAY|| -||-|| Not Configurable||Read Only. Ex. "BTSID1"

+

|-

−

|Serial||180A||2A25||BYTE ARRAY||-||-||Not Configurable||Not used

+

|Serial||180A||2A25 ||BYTE ARRAY||-||-||Not Configurable ||Not used

+

|-

−

|Hardware||180A||2A27||BYTE ARRAY||-||-||Not Configurable||Read Only. Ex. "Table:1 Volt:325

+

| Hardware||180A|| 2A27 ||BYTE ARRAY||-||-||Not Configurable||Read Only. Ex. "Table:1 Volt:325

+

|-

−

|Firmware||180A||2A26||BYTE ARRAY||-||-||Not Configurable||Read Only. Ex. "1.1.0-beta"

+

|Firmware|| 180A ||2A26||BYTE ARRAY||-||-||Not Configurable||Read Only. Ex. "1.1.0-beta"

+

|-

−

|System ID||180A||2A23||BYTE ARRAY||-||-||Not Configurable||Not used

+

| System ID ||180A||2A23||BYTE ARRAY||-||-|| Not Configurable||Not used

+

|-

−

|MAC||180A||652143dc-dec6-4fb1-bd46-3e919d2410a6||BYTE ARRAY||6||6||Not Configurable||Read Only. ex. 112233445566 -> 11:22:33:44:55:66

+

|MAC||180A||652143dc-dec6-4fb1-bd46-3e919d2410a6 || BYTE ARRAY||6||6||Not Configurable||Read Only. ex. 112233445566 -> 11:22:33:44:55:66

+

|-

−

|Scan Response Data||e61c0000-7df3-4d4e-8e6d-c611745b92e9||e61c0001-7df3-4d4e-8e6d-c611745b92e9||BYTE ARRAY||17||17||Not Configurable||Scan Response Data, see picture for detail view of data structure

+

−

|}[[File:~~GATT_Beacon~~.png|800px|frameless|center]]

+

|Scan Response Data ||e61c0000-7df3-4d4e-8e6d-c611745b92e9|| e61c0001-7df3-4d4e-8e6d-c611745b92e9||BYTE ARRAY||17 || 17||Not Configurable ||Scan Response Data, see picture for detail view of data structure

+

|}

+

[[File:Lentele0603.png|800px|frameless|center]]

===Command characteristic===

Line 621: Line 665:

! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 280px;" |Description

|-

−

|Write to flash||0x0010|| Writes set parameters to flash

+

|Write to flash||0x0010||Writes set parameters to flash

|-

|General boot||0x0011||Enter boot mode

Line 629: Line 673:

|Reset after connection||0x0013||Reset after disconnect

|-

−

|Get hw voltage ||0x0014||Sets detected hw voltage in response data

+

|Get hw voltage||0x0014||Sets detected hw voltage in response data

|-

|Keep connection alive||0x0015||Resets disconnect timer

|-

−

|Restore defaults||0x0016 || Sets all configurable parameters to default values

+

|Restore defaults||0x0016||Sets all configurable parameters to default values

|}

Line 643: Line 687:

|+

|Data part

−

| BLE beacon flags #1

+

|BLE beacon flags #1

|Beacon ID #1

−

| Signal Strength #1

+

|Signal Strength #1

|Beacon data #2

|-

|1 Byte

−

|1 Byte

+

| 1 Byte

|20/16 Bytes

−

|1 Byte

+

| 1 Byte

|…

|-

Line 664: Line 708:

01 Eddystone with RSSI

−

|Beacon – 20B (~~UUDI~~, major, minor)

+

|Beacon – 20B (UUID, major, minor)

Eddystone – 16B (Namespace, Instance ID)

Line 680: Line 724:

|-

! colspan="2" rowspan="1" style="width:60%; vertical-align: middle; text-align: center;" |AVL Data Packet Part

−

! rowspan="1" style="width:40%; vertical-align: middle; text-align: center;" | HEX Code Part

+

! rowspan="1" style="width:40%; vertical-align: middle; text-align: center;" |HEX Code Part

|-

| rowspan="4" style="vertical-align: middle; text-align: center;" |

Line 702: Line 746:

| style="vertical-align: middle; text-align: center;" |01

|-

−

| style="vertical-align: middle; text-align: center;" | Longitude

+

| style="vertical-align: middle; text-align: center;" |Longitude

| style="vertical-align: middle; text-align: center;" |0F 0E 50 2A

|-

Line 723: Line 767:

| style="vertical-align: middle; text-align: center;" |01 81 (385)

|-

−

| style="vertical-align: middle; text-align: center;" |N of Total ID

+

| style="vertical-align: middle; text-align: center;" | N of Total ID

| style="vertical-align: middle; text-align: center;" |00 01

|-

Line 765: Line 809:

|-

|Data part

−

| BLE beacon flags #1

+

|BLE beacon flags #1

|Beacon ID #1

|Signal Strength #1

|Beacon data #2

|-

−

|1 Byte

+

| 1 Byte

|1 Byte

|20/16 Bytes

−

|1 Byte

+

| 1 Byte

|…

|-

Line 787: Line 831:

0B154E2D0055 – BLE Beacon Instance ID

−

| -49

+

| -49

| -

Line 807: Line 851:

| style="vertical-align: middle; text-align: center;" |00 00 00 00

|-

−

| style="vertical-align: middle; text-align: center;" | Data Field Length

+

| style="vertical-align: middle; text-align: center;" |Data Field Length

| style="vertical-align: middle; text-align: center;" |00 00 00 5A

|-

Line 816: Line 860:

| style="vertical-align: middle; text-align: center;" |01

|-

−

| rowspan="24" style="vertical-align: middle; text-align: center;" | AVL Data

+

| rowspan="24" style="vertical-align: middle; text-align: center;" |AVL Data

−

| style="vertical-align: middle; text-align: center;" | Timestamp

+

| style="vertical-align: middle; text-align: center;" |Timestamp

| style="vertical-align: middle; text-align: center;" |00 00 01 6B 69 B0 C9 51(GMT: Tuesday, 18 June 2019 08:25:22.001)

|-

−

| style="vertical-align: middle; text-align: center;" | Priority

+

| style="vertical-align: middle; text-align: center;" |Priority

−

| style="vertical-align: middle; text-align: center;" | 00

+

| style="vertical-align: middle; text-align: center;" |00

|-

| style="vertical-align: middle; text-align: center;" |Longitude

Line 844: Line 888:

| style="vertical-align: middle; text-align: center;" |01 81 (385)

|-

−

| style="vertical-align: middle; text-align: center;" |N of Total ID

+

| style="vertical-align: middle; text-align: center;" | N of Total ID

−

| style="vertical-align: middle; text-align: center;" | 00 01

+

| style="vertical-align: middle; text-align: center;" |00 01

|-

−

| style="vertical-align: middle; text-align: center;" | N1 of One Byte IO

+

| style="vertical-align: middle; text-align: center;" |N1 of One Byte IO

| style="vertical-align: middle; text-align: center;" |00 00

|-

Line 885: Line 929:

! colspan="7" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |AVL 385 Parsing

|+

−

| Data part

+

|Data part

|BLE beacon flags #1

|Beacon ID #1

Line 891: Line 935:

|Beacon data #2

|-

−

|1 Byte

+

| 1 Byte

−

|1 Byte

+

| 1 Byte

|20/16 Bytes

−

|1 Byte

+

| 1 Byte

|…

|-

Line 909: Line 953:

|-

| -

−

| 21 – iBeacon with RSSI

+

|21 – iBeacon with RSSI

|A579723675064DC396A7C3520129F619 – UUID

0000 – Major

Line 951: Line 995:

|-

| style="vertical-align: middle; text-align: center;" |Codec ID

−

| style="vertical-align: middle; text-align: center;" | 8E (Codec8 Extended)

+

| style="vertical-align: middle; text-align: center;" |8E (Codec8 Extended)

|-

| style="vertical-align: middle; text-align: center;" |Number of Data 1 (Number of Total Records)

−

| style="vertical-align: middle; text-align: center;" | 01

+

| style="vertical-align: middle; text-align: center;" |01

|-

| rowspan="24" style="vertical-align: middle; text-align: center;" |AVL Data

Line 984: Line 1,028:

| style="vertical-align: middle; text-align: center;" |2a 4f (10831)

|-

−

| style="vertical-align: middle; text-align: center;" |N of Total ID

+

| style="vertical-align: middle; text-align: center;" | N of Total ID

−

| style="vertical-align: middle; text-align: center;" | 00 01

+

| style="vertical-align: middle; text-align: center;" |00 01

|-

−

| style="vertical-align: middle; text-align: center;" | N1 of One Byte IO

+

| style="vertical-align: middle; text-align: center;" |N1 of One Byte IO

| style="vertical-align: middle; text-align: center;" |00 00

|-

Line 1,006: Line 1,050:

| style="vertical-align: middle; text-align: center;" |2a 4f (10831)

|-

−

| style="vertical-align: middle; text-align: center;" | Length of Variable Length IO

+

| style="vertical-align: middle; text-align: center;" |Length of Variable Length IO

| style="vertical-align: middle; text-align: center;" |00 1e (30 bytes)

|-

Line 1,034: Line 1,078:

! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |Parsing the data

|-

−

! colspan="2" rowspan="1" style="width:60%; vertical-align: middle; text-align: center;" | AVL Data packet part

+

! colspan="2" rowspan="1" style="width:60%; vertical-align: middle; text-align: center;" |AVL Data packet part

−

! rowspan="1" style="width:40%; vertical-align: middle; text-align: center;" | HEX Code Part

+

! rowspan="1" style="width:40%; vertical-align: middle; text-align: center;" |HEX Code Part

|-

| rowspan="3" |

Line 1,045: Line 1,089:

|-

| style="vertical-align: middle; text-align: center;" |Parameter ID

−

| style="vertical-align: middle; text-align: center;" | 00 (Eye Beacon RSSI)

+

| style="vertical-align: middle; text-align: center;" |00 (Eye Beacon RSSI)

|-

| rowspan="60" style="vertical-align: middle; text-align: center;" |AVL Data

Line 1,075: Line 1,119:

| style="vertical-align: middle; text-align: center;" |0e (Eye Beacon Battery voltage)

|-

−

| style="vertical-align: middle; text-align: center;" | Parameter data length

+

| style="vertical-align: middle; text-align: center;" |Parameter data length

| style="vertical-align: middle; text-align: center;" |02 (2 bytes)

|-

Line 1,101: Line 1,145:

|-

! colspan="2" rowspan="1" style="width:60%; vertical-align: middle; text-align: center;" |AVL Data Packet Part

−

! rowspan="1" style="width:40%; vertical-align: middle; text-align: center;" | HEX Code Part

+

! rowspan="1" style="width:40%; vertical-align: middle; text-align: center;" |HEX Code Part

|-

| rowspan="4" style="vertical-align: middle; text-align: center;" |

−

| style="vertical-align: middle; text-align: center;" | Zero Bytes

+

| style="vertical-align: middle; text-align: center;" |Zero Bytes

| style="vertical-align: middle; text-align: center;" |00 00 00 00

|-

Line 1,111: Line 1,155:

|-

| style="vertical-align: middle; text-align: center;" |Codec ID

−

| style="vertical-align: middle; text-align: center;" | 8E (Codec8 Extended)

+

| style="vertical-align: middle; text-align: center;" |8E (Codec8 Extended)

|-

| style="vertical-align: middle; text-align: center;" |Number of Data 1 (Number of Total Records)

Line 1,139: Line 1,183:

|-

| style="vertical-align: middle; text-align: center;" |Speed

−

| style="vertical-align: middle; text-align: center;" | 00 00

+

| style="vertical-align: middle; text-align: center;" |00 00

|-

| style="vertical-align: middle; text-align: center;" |Event IO ID

−

| style="vertical-align: middle; text-align: center;" | 2a 4c (10828)

+

| style="vertical-align: middle; text-align: center;" |2a 4c (10828)

|-

−

| style="vertical-align: middle; text-align: center;" |N of Total ID

+

| style="vertical-align: middle; text-align: center;" | N of Total ID

| style="vertical-align: middle; text-align: center;" |00 01

|-

Line 1,160: Line 1,204:

| style="vertical-align: middle; text-align: center;" |00 00

|-

−

| style="vertical-align: middle; text-align: center;" | NX of X Bytes IO

+

| style="vertical-align: middle; text-align: center;" |NX of X Bytes IO

| style="vertical-align: middle; text-align: center;" |00 01

|-

Line 1,170: Line 1,214:

|-

| style="vertical-align: middle; text-align: center;" |Value of Variable Length IO 10831

−

| style="vertical-align: middle; text-align: center;" |

+

| style="vertical-align: middle; text-align: center;" |

'''011c0001c00110eb577075868d55aa96021b20313800550d01000e020c1c1c0001b60110ef3f3f74868d55aa9aeae91e313800550d01000e020bae 200001a50114faffffff34b6f6aa38255aa9ef619154d0e200050d01000e020ad2'''

|-

Line 1,210: Line 1,254:

| style="vertical-align: middle; text-align: center;" |01 (1 byte)

|-

−

| style="vertical-align: middle; text-align: center;" | Parameter data

+

| style="vertical-align: middle; text-align: center;" |Parameter data

| style="vertical-align: middle; text-align: center;" |c0 (Converted to Decimal from signed 2s complement = -64dBm)

|-

Line 1,226: Line 1,270:

|-

| style="vertical-align: middle; text-align: center;" |Parameter data length

−

| style="vertical-align: middle; text-align: center;" | 01 (1 byte)

+

| style="vertical-align: middle; text-align: center;" |01 (1 byte)

|-

| style="vertical-align: middle; text-align: center;" |Parameter data

Line 1,253: Line 1,297:

|-

| style="vertical-align: middle; text-align: center;" |Parameter ID

−

| style="vertical-align: middle; text-align: center;" | 01 (Beacon ID)

+

| style="vertical-align: middle; text-align: center;" |01 (Beacon ID)

|-

| style="vertical-align: middle; text-align: center;" |Parameter data length

Line 1,279: Line 1,323:

| style="vertical-align: middle; text-align: center;" |0b ae (2990mV)

|-

−

! style="vertical-align: middle; text-align: center;" | Eye Beacon #3 data length

+

! style="vertical-align: middle; text-align: center;" |Eye Beacon #3 data length

| style="vertical-align: middle; text-align: center;" |20 (32 bytes)

|-

Line 1,325: Line 1,369:

1. To avoid mechanical damage, it is advised to transport the device in an impact-proof package.

−

2. In case of malfunction contact ~~yours~~ Teltonika account manager or write to technical support team over ~~VIP helpdesk~~.

+

2. In case of malfunction contact your Teltonika account manager or write to the technical support team over the Helpdesk.

−

[[File:Safety.~~jpg~~]]

+

[[File:Safety information.png]]

==Certification & Approvals==

Line 1,333: Line 1,377:

|+

! style="width:50%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Certificates

−

! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |

+

! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Links

+

! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Valid for Model

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |E-Mark (EU)

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_E-Mark|~~YES~~]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_E-Mark|Yes]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |FCC (USA)

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_FCC|~~YES~~]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_FCC|Yes]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |CE/RED (EU)

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_CE_/_RED|~~YES~~]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_CE_/_RED|Yes]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |RoHS (EU)

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_RoHS|~~YES~~]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_RoHS|Yes]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |REACH (EU)

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_REACH|~~YES~~]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_REACH|Yes]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Anatel(EU)

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_ANATEL|~~YES~~]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_ANATEL|Yes]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |IP rating

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_IP67|~~YES~~]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_IP67|Yes]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |SIRIM QAS

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_SIRIM QAS|~~YES~~]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_SIRIM QAS|Yes]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |SDPPI POSTEL

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_SDPPI POSTEL|~~YES~~]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_SDPPI POSTEL|Yes]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |TELEC

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_TELEC|~~YES~~]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_TELEC|Yes]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |All

+

|-

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |ATEX

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_ATEX|Yes]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |ATEX

+

|}

+

==Memberships==

+

{| class="wikitable"

+

|+

+

! style="width:50%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Name

+

! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Links

+

|-

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Bluetooth® SIG

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1 Bluetooth® SIG|Yes]]

+

|-

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |WEEE

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1 WEEE|Yes]]

|}

Line 1,371: Line 1,444:

|+

! style="width:50%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Name

−

! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |

+

! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Links

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |EAN

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_EAN|~~YES~~]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_EAN|Yes]]

|-

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |HS

−

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_HS|~~YES~~]]

+

| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSID1_HS|Yes]]

|}

Line 1,405: Line 1,478:

*[[3Dtracking with Fleet Management (FM)|3Dtracking]]

*[[GPS-server with Fleet Management (FM)|GPS-server]]

−

*[[~~Gurtam~~ Wialon with Fleet Management (FM)|~~Gurtam~~ Wialon]]

+

*[[Wialon with Fleet Management (FM)|Wialon]]

*[[Mapon with Fleet Management (FM)|Mapon]]

*[[WhiteLabel Tracking with Fleet Management (FM)|WhiteLabel Tracking]]

Line 1,421: Line 1,494:

{|

|[[File:pdf_icon.png|32px|]]

−

|[~~https~~:~~//teltonika~~-~~gps~~.~~com/datasheet_eye_beacon~~.pdf Datasheet ~~PDF~~]

+

|[[Media:Datasheet-BTSID1 EYE BEACON 4.1.pdf|Eye Beacon Datasheet]]

−

|(Updated on: {{{datasheet_date|~~2023~~-03-13}}})

+

|(Updated on: {{{datasheet_date|2024-03-15}}})

|

|[[File:pdf_icon.png|32px|]]

−

|[[Media:~~Quick~~-~~manual-BTSID1~~.pdf|~~BTSID1 Quick Manual (EN)~~]]

+

|[[Media:EYE BEACON ATEX Datasheet-1.0.pdf|Eye Beacon ATEX Datasheet]]

−

|(Updated on: {{{datasheet_date|~~2023~~-03-13}}})

+

|(Updated on: {{{datasheet_date|2024-05-29}}})

|

|[[File:pdf_icon.png|32px|]]

−

|[~~https~~:~~//wiki.teltonika-gps.com/images/d/d1/North~~-~~America-flyer~~.pdf ~~North America Flyer~~]

+

|[[Media:QM-BTSMP1.pdf|BTSID1 Quick Manual (EN)]]

−

|(Updated on: {{{datasheet_date|~~2023~~-03-13}}})

+

|(Updated on: {{{datasheet_date|2024-01-17}}})

|}

[[Category:Sensors]]

Donatas.urbonas

Administrators

287

edits

Namespaces

Variants

Views

More

Search

Changes

EYE BEACON / BTSID1 (view source)

Revision as of 11:20, 29 May 2024

Navigation menu

Personal tools

NAVIGATION

Tools

Categories