Changes

{{{with_battery|

{{{with_battery|

# Gently remove {{{model|FTC881}}} '''cover''' using '''plastic pry tool''' from one side.

# Device is delivered partly closed. Gently remove {{{model|FTC881}}} '''cover'''.

# Gently remove {{{model|FTC881}}} '''cover''' using '''plastic pry tool''' from another side.

# Insert '''{{{sim_type|Nano-}}}SIM''' card as shown. Make sure that {{{sim_type|Nano-}}}SIM card '''cut-off corner''' is pointing towards SIM slot.

# Insert '''{{{sim_type|Nano-}}}SIM''' card as shown. Make sure that {{{sim_type|Nano-}}}SIM card '''cut-off corner''' is pointing forward to slot.

# Battery is already connected, so after configuring device fully close casing.

# Connect the battery as shown on device. Make sure that "+" is pointing to SIM-slot, "-" is pointing to GNSS antenna.

# Device is ready to be mounted.}}}

# Attach device '''cover''' back. Device is ready to be connected.}}}

{{{SIM1|[[Image:FTC881_battery_1.png|850px]]}}}

{{{SIM1|[[Image:FTX8_device_setup.png|850px]]}}}

{{{SIM2|[[Image:FTC881_battery_2.png|550px]]}}}

| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Nano-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Nano-}}}SIM card might be damaged or device will not detect it.</b>

| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Nano-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Nano-}}}SIM card might be damaged or device will not detect it.</b>

|}

|}

=='''PC CONNECTION (WINDOWS)'''==

=='''PC CONNECTION (WINDOWS)'''==