172
edits
Changes
Template:FMB965 Accelerometer Features settings (view source)
Revision as of 13:17, 20 June 2024
, 20 Juneno edit summary
* '''Alarm Delay''' - this parameter sets time for how long the configured angle needs to be exceeded for the alarm event to trigger. The angle is checked every 1 second, so if during the alarm delay time the device is put back into vertical position (device angle is less than configured detection angle) the alarm delay resets.
* '''Alarm Delay''' - this parameter sets time for how long the configured angle needs to be exceeded for the alarm event to trigger. The angle is checked every 1 second, so if during the alarm delay time the device is put back into vertical position (device angle is less than configured detection angle) the alarm delay resets.
* '''Active Time''' - amount of time that has to pass after movement goes from 1 to 0, before vector gets sstored and angle starts being checked.
* '''Active Time''' - amount of time that has to pass after movement goes from 1 to 0, before vector gets sstored and angle starts being checked.
===Zero vector===
It is an accelerometer vector, which is considered to represent a standing bike. . It gets stored as such when movement goes from 1 to 0 and stays 0 for the configured Active Time.
