137
edits
Changes
→Device information
'''Battery voltage''' - Indicates the voltage of the internal battery in the device.
'''Battery voltage''' - Indicates the voltage of the internal battery in the device.
'''internal battery status''' - Display the internal battery level in percentage, as well as the current charging state of the battery.
'''Internal battery status''' - Display the internal battery level in percentage, as well as the current charging state of the battery.
'''Export''' - has the option to export the device's current statuses (Device Info, GSM Info, GNSS Info, I/O Info, and External I/O Info) into HTML format.
<br>
<br>
==Cellular information==
==GNSS information==
[[File:Cellular Information.png|right|500px]]
[[File:FTC GNSS RESIZED AUTO.gif|right]]
'''GNSS version''' - Displays the firmware version of the GNSS module.
'''Module status''' - Displays the modem status (ON/OFF/Sleep).
'''GNSS packets''' - The number of GNSS packets received by the GNSS receiver.
'''Modem version''' - The modem version of the GSM module
'''Fix status''' - Displays the status of the GNSS Fix.
'''Modem status''' - Displays the status of the modem (ON/OFF/Sleep)
'''Time to first fix''' - Specifies the time, in seconds, of how long it took the device to obtain a GNSS Fix from a cold start.
'''Network status''' - Displays the GPRS status of the device
'''Time to last fix''' - Specifies the time, in seconds, of how long it took the device to obtain the most recent GNSS Fix.
''' Current operator code''' - Specified current SIM-card operator code.
'''Satelites''' - Displays the number of '''Visible''' and '''In use''' navigation satellites from different navigation systems
'''Signal Level''' - Specifies the current signal strength of the connected network.
'''Location''' - Displays the information about current '''Latitude/Longitude''', '''Altitude''', '''Speed''' and '''Angle''' as well as the current device position on a map.
<br>
<br>
<br>
<br>
<br>
<br>
==Cellular information==
[[File:Cellular Information.png|right|500px]]
'''Module status''' - Displays the modem status (ON/OFF/Sleep).
'''Modem version''' - The modem version of the GSM module
'''GNSS packets''' - The number of GNSS packets received by the GNSS receiver.
'''Modem status''' - Displays the status of the modem (ON/OFF/Sleep)
'''Fix status''' - Displays the status of the GNSS Fix.
'''Network status''' - Displays the GPRS status of the device
'''Time to first fix''' - Specifies the time, in seconds, of how long it took the device to obtain a GNSS Fix from a cold start.
''' Current operator code''' - Specified current SIM-card operator code.
'''Time to last fix''' - Specifies the time, in seconds, of how long it took the device to obtain the most recent GNSS Fix.
'''Signal Level''' - Specifies the current signal strength of the connected network.
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
==SIM Security==
==SIM Security==
[[File:FTC SIM security new.png|right|500 px]]
[[File:SSim Security.png|right|500px]]
*The state and status of the currently connected SIM card can be observed here. If a SIM card with a PIN code is used, the user can enter it in this section. The remaining attempts to enter the PIN code are shown as well.
*The state and status of the currently connected SIM card can be observed here. If a SIM card with a PIN code is used, the user can enter it in this section. The remaining attempts to enter the PIN code are shown as well.
*When the SIM PIN code is entered correctly, the user can change the PIN code or disable it from the SIM card. When SIM PIN is disabled and the user would like to enable it again, the user must enter the previously used PIN code.
*When the SIM PIN code is entered correctly, the user can change the PIN code or disable it from the SIM card. When SIM PIN is disabled and the user would like to enable it again, the user must enter the previously used PIN code.
<br>
<br>
<br>
<br>
<br>
<br>
==Maintenance==
==Maintenance==
[[File:FTC Maintenance.png|right|500 px]]
[[File:Maintenance latest.png|right|500px]]
'''Dump''' - after the button is pressed, the device starts to download .dmp logs and configuration .cfg from the device in a compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMB1YX}}}_IMEI_Dump.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code><br>Dump files can be read only with special software. If needed, provide these files to your Teltonika sales manager or Teltonika Support team for analysis.</p>
'''Open file''' - this new tab opens at the bottom of the page after the Dump has been downloaded.
'''Dump''' - after the button is pressed, the device starts downloading .dmp logs and configuration .cfg from the device in a compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FTCXYX}}}_IMEI_Dump.zip</code><br>Default directory: <code>C:\Users\user_name\AppData\Roaming\Teltonika\TCT\logs</code><br>Dump files can be read only with special software. If needed, provide these files for analysis to your Teltonika sales manager or Teltonika Support team.</p>
'''Open file''' - this new tab opens at the bottom of the page after downloading the Dump.
[[Category:{{{model|}}} Configuration]]
[[Category:{{{model|}}} Configuration]]