Wiki Knowledge Base | Teltonika GPS

Changes

Template:FMx6 CAN adapters (view source)

Revision as of 12:51, 28 June 2024

6,554 bytes added ,  28 June
→‎CAN Adapter State Flags
Line 1: Line 1:  
[[File:Alert.png|left|20px|link=]] {{{model|FMB640}}} supports CAN adapters over RS232 connection. '''CAN adapter support is added from {{{firmware|02.02.11.Rev.00}}} firmware''' <br> Easy steps to install and configure following CAN adapters on {{{model|FMB640}}} device:
 
[[File:Alert.png|left|20px|link=]] {{{model|FMB640}}} supports CAN adapters over RS232 connection. '''CAN adapter support is added from {{{firmware|02.02.11.Rev.00}}} firmware''' <br> Easy steps to install and configure following CAN adapters on {{{model|FMB640}}} device:
 
* [[LV-CAN200]]
 
* [[LV-CAN200]]
 +
* [[ALL-CAN300]]
 
* [[ECAN02]]
 
* [[ECAN02]]
   Line 6: Line 7:     
==Installing CAN adapter with {{{model|FMB640}}} device==
 
==Installing CAN adapter with {{{model|FMB640}}} device==
−
===Installing LV-CAN200===
+
===Installing LV-CAN200 / ALL-CAN300===
   −
You can watch [[LV-CAN200]] installation video in our YouTube channel [https://youtu.be/V9RTdSy1E8w '''here'''] or follow connection instructions below.
+
You can watch [[LV-CAN200]] / [[ALL-CAN300]] installation video in our YouTube channel [https://youtu.be/V9RTdSy1E8w '''here'''] or follow connection instructions below.
 
====Tools needed for installation====
 
====Tools needed for installation====
−
* [[LV-CAN200]]
+
* [[LV-CAN200]] or [[ALL-CAN300]]
 
* Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.
 
* Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.
 
* {{{model|FMB640}}} device
 
* {{{model|FMB640}}} device
Line 30: Line 31:  
[[File:{{{imageName|FMX65vall.png}}}|1000px|none|thumb|LV-CAN200 connection example. This is not a connection diagram for your vehicle. Every vehicle has a specific scheme.]]
 
[[File:{{{imageName|FMX65vall.png}}}|1000px|none|thumb|LV-CAN200 connection example. This is not a connection diagram for your vehicle. Every vehicle has a specific scheme.]]
   −
===Installing LV-CAN200 + ECAN02===
+
===Installing LV-CAN200 / ALL-CAN300 + ECAN02===
 
====Tools needed for installation====
 
====Tools needed for installation====
−
* [[LV-CAN200]]
+
* [[LV-CAN200]] / [[ALL-CAN300]]
 
* Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.
 
* Connection scheme (Please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.
 
* [[ECAN02]] (Used for contactless connection. If '''two CAN lines''' need to be connected, '''ECAN02''' must be used.)
 
* [[ECAN02]] (Used for contactless connection. If '''two CAN lines''' need to be connected, '''ECAN02''' must be used.)
Line 66: Line 67:  
The number of digits required to enter the correct Program No. may vary depending on the Software and manufacture date of your CAN Adapter:
 
The number of digits required to enter the correct Program No. may vary depending on the Software and manufacture date of your CAN Adapter:
 
* [[LV-CAN200#Adapter_changes|LV-CAN200 adapter changes]]
 
* [[LV-CAN200#Adapter_changes|LV-CAN200 adapter changes]]
 +
* [[ALL-CAN300#Adapter_changes|ALL-CAN300 adapter changes]]
    
====Entering via SMS command====
 
====Entering via SMS command====
Line 110: Line 112:  
|+  
 
|+  
 
|-
 
|-
−
| rowspan="5" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:10%;" | For LV-CAN200<br/>3 digit
+
| rowspan="5" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:10%;" |For<br />[[ALL-CAN300]]<br />[[LV-CAN200]]<br />3 digit
−
| rowspan="6" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:10%;" | For LV-CAN200<br/>4 digit
+
| rowspan="6" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:10%;" |For<br />[[ALL-CAN300]]<br />[[LV-CAN200]]<br />4 digit
−
| rowspan="7" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:11%;" | For<br/>LV-CAN200<br/>>5 digit
+
| rowspan="7" style="border: 1px solid #0054A6; background: white; color: #0054A6; text-align: center; width:11%;" |For<br />[[ALL-CAN300]]<br />[[LV-CAN200]]<br />5 digit
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white; width:38%;" |1. Hold SWITCH down until LED stars blink.
 
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white; width:38%;" |1. Hold SWITCH down until LED stars blink.
 
|-
 
|-
Line 563: Line 565:  
Due to the growing number of supported cars, program numbers have exceeded "999". In order to maintain one number format, we are moving from 3-digit to 4-digit program numbers.<br/>In new LV-CAN200 firmware (from 2017-09-01) all program numbers that were up to 999 are changed to start from 1000. So that further program numbers would continue the counting with 4-digit numbers.<br/>However, all existing program numbers stay the same, but "1" is added to the front. If the device still understands the entered 3-digit program number (via SMS/GPRS), it will automatically add "1" before it. If you enter "247" - the device number will turn into "1247". In Bootloader only a 4-digit format is available, just add "1" to the front of the needed program number.
 
Due to the growing number of supported cars, program numbers have exceeded "999". In order to maintain one number format, we are moving from 3-digit to 4-digit program numbers.<br/>In new LV-CAN200 firmware (from 2017-09-01) all program numbers that were up to 999 are changed to start from 1000. So that further program numbers would continue the counting with 4-digit numbers.<br/>However, all existing program numbers stay the same, but "1" is added to the front. If the device still understands the entered 3-digit program number (via SMS/GPRS), it will automatically add "1" before it. If you enter "247" - the device number will turn into "1247". In Bootloader only a 4-digit format is available, just add "1" to the front of the needed program number.
 
-->
 
-->
 +
 +
==CAN Adapter State Flags==
 +
 +
CAN Adapters receive data about the states of various systems within the vehicle, and send them as flags to {{{model|FMx640}}}. {{{model|FMx640}}} device stores these flags in hexadecimal format, as one variable. '''Note!''' To retrieve all flags, Firmware version '''03.00.16.Rev.01''' for '''FMx650 / FMx641''' or newer must be used. Below are the table of flags that are kept by [[LV-CAN200|LV-CAN200]], [[ALL-CAN300|ALL-CAN300]] and information how to retrieve them:<br />
 +
 +
===Security State Flags P4===
 +
{| class="nd-othertables_2" style="text-align:center; border: 2px solid;border-collapse: collapse; border-bottom: 2pt solid black;"
 +
|-
 +
! style="column-width: 30px;text-align:center;"| Byte
 +
! style="column-width: 30px;text-align:center;"|Bit
 +
! style="text-align:center;"|Value bitmasks
 +
! style="column-width: 75px;text-align:center;"|LVCAN
 +
! style="column-width: 75px;text-align:center;"|ALLCAN
 +
 +
|-
 +
| style="color:#f56b00;" | 0
 +
| style="color:#f56b00;" | 0
 +
| 0x00 – CAN1 connected, currently no data is received<br />0x01 – CAN1 connected, currently data is received<br />0x02 – CAN1 not connected, needs connection<br />0x03 – CAN1 not connected does not need connection
 +
| ✔
 +
| ✔
 +
 +
|-
 +
| style="color:#f56b00;" | 0
 +
| style="color:#f56b00;" | 2
 +
| 0x00 – CAN2 connected, currently no data is received<br />0x01 – CAN2 connected, currently data is received<br />0x02 – CAN2 not connected, needs connection<br />0x03 – CAN2 not connected does not need connection
 +
| ✔
 +
| ✔
 +
 +
|-
 +
| style="color:#f56b00;" | 0
 +
| style="color:#f56b00;" | 4
 +
| 0x00 – CAN3 connected, currently no data is received<br />0x01 – CAN3 connected, currently data is received<br />0x02 – CAN3 not connected, needs connection<br />0x03 – CAN3 not connected does not need connection
 +
|
 +
|
 +
 +
|-
 +
| style="color:#3531ff;" | 1
 +
| style="color:#3531ff;" | 8
 +
| 0x01 – ignition on
 +
| ✔
 +
| ✔
 +
 +
|-
 +
| style="color:#3531ff;" | 1
 +
| style="color:#3531ff;" | 9
 +
| 0x02 – key in ignition lock
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#3531ff;" | 1
 +
| style="color:#3531ff;" | 10
 +
| 0x04 – Webasto
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#3531ff;" | 1
 +
| style="color:#3531ff;" | 11
 +
| 0x08 – engine is working
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#3531ff;" | 1
 +
| style="color:#3531ff;" | 12
 +
| 0x10 – standalone engine
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#3531ff;" | 1
 +
| style="color:#3531ff;" | 13
 +
| 0x20 – ready to drive
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#3531ff;" | 1
 +
| style="color:#3531ff;" | 14
 +
| 0x40 – engine is working on CNG
 +
| ✔
 +
| ✔
 +
 +
|-
 +
| style="color:#3531ff;" | 1
 +
| style="color:#3531ff;" | 15
 +
| 0x80 – work mode (0 – private, 1 – company)
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#009901;" | 2
 +
| style="color:#009901;" | 16
 +
| 0x01 – operator is present
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#009901;" | 2
 +
| style="color:#009901;" | 17
 +
| 0x02 – interlock active
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#009901;" | 2
 +
| style="color:#009901;" | 18
 +
| 0x04 – handbrake is active
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#009901;" | 2
 +
| style="color:#009901;" | 19
 +
| 0x08 – footbrake is active
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#009901;" | 2
 +
| style="color:#009901;" | 20
 +
| 0x10 – clutch is pushed
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#009901;" | 2
 +
| style="color:#009901;" | 21
 +
| 0x20 – status of the hazard warning lights switch active
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#009901;" | 2
 +
| style="color:#009901;" | 22
 +
| 0x40 – front left door opened
 +
| ✔
 +
| ✔
 +
 +
|-
 +
| style="color:#009901;" | 2
 +
| style="color:#009901;" | 23
 +
| 0x80 – front right door opened
 +
| ✔
 +
| ✔
 +
 +
|-
 +
| style="color:#d13c00;" | 3
 +
| style="color:#d13c00;" | 24
 +
| 0x01 – rear left door opened
 +
| ✔
 +
| ✔
 +
 +
|-
 +
| style="color:#d13c00;" | 3
 +
| style="color:#d13c00;" | 25
 +
| 0x02 – rear right door opened
 +
| ✔
 +
| ✔
 +
 +
|-
 +
| style="color:#d13c00;" | 3
 +
| style="color:#d13c00;" | 26
 +
| 0x04 – trunk door opened
 +
| ✔
 +
| ✔
 +
 +
|-
 +
| style="color:#d13c00;" | 3
 +
| style="color:#d13c00;" | 27
 +
| 0x08 – engine cover opened
 +
| ✔
 +
| ✔
 +
 +
|-
 +
| style="color:#d13c00;" | 3
 +
| style="color:#d13c00;" | 28
 +
| 0x10 – charging wire is plugged
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#d13c00;" | 3
 +
| style="color:#d13c00;" | 29
 +
| 0x20 – battery charging on
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#d13c00;" | 3
 +
| style="color:#d13c00;" | 30
 +
| 0x40 – electric engine is working
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#d13c00;" | 3
 +
| style="color:#d13c00;" | 31
 +
| 0x80 – car is closed with factory remote control
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#ff00db;" | 4
 +
| style="color:#ff00db;" | 32
 +
| 0x01 – car is closed
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#ff00db;" | 4
 +
| style="color:#ff00db;" | 33
 +
| 0x02 – factory installed alarm is active
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#ff00db;" | 4
 +
| style="color:#ff00db;" | 34
 +
| 0x04 – emulated alarm is active
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#ff00db;" | 4
 +
| style="color:#ff00db;" | 35
 +
| 0x08 – signal of closing with factory remote control was sent
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#ff00db;" | 4
 +
| style="color:#ff00db;" | 36
 +
| 0x10 – signal of opening with factory remote control was sent
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#ff00db;" | 4
 +
| style="color:#ff00db;" | 37
 +
| 0x20 – rearm signal was sent
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#ff00db;" | 4
 +
| style="color:#ff00db;" | 38
 +
| 0x40 – trunk was opened with remote control
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#ff00db;" | 4
 +
| style="color:#ff00db;" | 39
 +
| 0x80 – CAN module is in SLEEP mode
 +
| ✔
 +
| ✔
 +
 +
|-
 +
| style="color:#340096;" | 5
 +
| style="color:#340096;" | 40
 +
| 0x01 – signal of closing with factory remote control was sent 3 times
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#340096;" | 5
 +
| style="color:#340096;" | 41
 +
| 0x02 – parking is active
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#340096;" | 5
 +
| style="color:#340096;" | 42
 +
| 0x04 – reverse is active
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#340096;" | 5
 +
| style="color:#340096;" | 43
 +
| 0x08 – neutral is active
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#340096;" | 5
 +
| style="color:#340096;" | 44
 +
| 0x10 – drive is active
 +
|
 +
| ✔
 +
 +
|-
 +
| style="color:#340096;" | 5
 +
| style="color:#340096;" | 45
 +
| 0x20 – engine lock active
 +
|
 +
|
 +
 +
|-
 +
| style="color:#340096;" | 5
 +
| style="color:#340096;" | 46
 +
| 0x40 – request to lock the engine (activation after attempt to restart the engine)
 +
|
 +
|
 +
 +
|-
 +
| style="color:#340096;" | 5
 +
| style="color:#340096;" | 47
 +
| 0x80 – factory armed
 +
|
 +
|
 +
 +
|-
 +
| style="color:#fe0000;" | 6
 +
| style="color:#fe0000;" | 48
 +
| 0x01 - roof opened
 +
| ✔
 +
| ✔
 +
 +
|}
 +
<br>
       
[[Category:FMB641 Manual]]
 
[[Category:FMB641 Manual]]
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/98966...99151"