Difference between revisions of "FMM640 General description"
m |
|||
(21 intermediate revisions by 9 users not shown) | |||
Line 1: | Line 1: | ||
− | {{Template: | + | {{Template:FMM64 General description|model=FMM640}} |
{{FMM640 Package contents}} | {{FMM640 Package contents}} | ||
Line 6: | Line 6: | ||
{{FMM640_Basic_characteristics}} | {{FMM640_Basic_characteristics}} | ||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | Cellular: | ||
+ | |||
+ | *LTE CAT M1/CAT NB1/EGPRS technologies | ||
+ | *2G bands: Quad-band 800/850/900/1900 MHz | ||
+ | *4G bands: | ||
+ | **FDD-LTE: B1/ B2/ B3/ B4/ B5/ B8/ B12/ B13/ B18/B19/ B20/ B28 | ||
+ | **TDD-LTE: B39 (for Cat.M1 only) | ||
+ | *Data transfer: | ||
+ | **LTE FDD: Max. 375Kbps (DL)/Max.375Kbps (UL) | ||
+ | **LTE TDD: Max. 32Kbps (DL)/Max. 70Kbps (UL) | ||
+ | **GPRS: Max. 107Kbps (DL)/Max. 85.6Kbps (UL) | ||
+ | *SMS (text, data) | ||
+ | <!-- | ||
Blue-tooth: | Blue-tooth: | ||
− | *Blue-tooth specification | + | *Blue-tooth specification V5.0 |
− | *Blue-tooth transceiver fully | + | *Blue-tooth transceiver fully compliant with Blue-tooth specification V5.0 for external peripherals: |
*Voice calls over Blue-tooth | *Voice calls over Blue-tooth | ||
− | + | --> | |
GNSS features: | GNSS features: | ||
Line 34: | Line 42: | ||
*STM32 processor; | *STM32 processor; | ||
− | * | + | *2 MB internal Flash memory; |
*External memory card slot; | *External memory card slot; | ||
*Built-in accelerometer; | *Built-in accelerometer; | ||
− | *Built-in Blue-tooth | + | *Built-in Blue-tooth 5.0; |
*Internal backup battery included; | *Internal backup battery included; | ||
Line 69: | Line 77: | ||
*Real time tracking; | *Real time tracking; | ||
*Smart data acquisition based on: | *Smart data acquisition based on: | ||
− | *Time; | + | ** Time; |
− | *Speed; | + | ** Speed; |
− | *Angle; | + | ** Angle; |
− | *Distance; | + | ** Distance; |
− | *Ignition or any other I/O event; | + | ** Ignition or any other I/O event; |
*Sending acquired data via GPRS; | *Sending acquired data via GPRS; | ||
*GPRS and SMS I/O events; | *GPRS and SMS I/O events; | ||
Line 81: | Line 89: | ||
*1x micro SIM card; 1x eSIM; | *1x micro SIM card; 1x eSIM; | ||
*Overvoltage protection; | *Overvoltage protection; | ||
− | + | * Reverse polarity protection; | |
{{Template:FMM1_Supply voltage 10 30}} | {{Template:FMM1_Supply voltage 10 30}} | ||
− | {{Template: | + | {{Template:FMM640 Technical features|gprs=60|nominal=40|gnss_sleep=31|deep_sleep=4|onl_deep_sleep=13|battery=55|operating_min=-40|operating_max=+85|storage_min=-40|storage_max=+85|humidity_min=5|humidity_max=95|}} |
==Technical information about internal battery== | ==Technical information about internal battery== | ||
− | {{Template: | + | {{Template:FMB640_Battery_information}} |
+ | |||
+ | == Battery tests == | ||
+ | The amount of time the device will work from internal battery depends on the battery health, how often the device saves/sends information to the server, external peripherals connected to the device and the results may also differ depending on firmware used. | ||
+ | |||
+ | For general comparison purpose, and to see what results can be achieved, you can refer to the following internal test results in different modes and sending frequencies: | ||
+ | <br> | ||
− | {{Template: | + | <table class="nd-othertables" style="width: 100%;"> |
+ | <tr> | ||
+ | <th style="width: 10%; text-align:center; vertical-align:middle; color: black">Mode:</th> | ||
+ | <th style="width: 20%; text-align:center; vertical-align:middle; color: black">Min Period (data saving frequency)</th> | ||
+ | <th style="width: 20%; text-align:center; vertical-align:middle; color: black">Send Period (data sending frequency)</th> | ||
+ | <th style="width: 15%; text-align:center; vertical-align:middle; color: black">Starting Voltage</th> | ||
+ | <th style="width: 15%; text-align:center; vertical-align:middle; color: black">Cut off Voltage</th> | ||
+ | <th style="width: 20%; text-align:center; vertical-align:middle; color: black">Time achieved</th> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td style="vertical-align:middle">Operating</td> | ||
+ | <td> 10 seconds</td> | ||
+ | <td> 60 seconds</td> | ||
+ | <td>10,1V</td> | ||
+ | <td>7,6V</td> | ||
+ | <td>438 min (7 hours 18 minutes)</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td style="vertical-align:middle">Operating</td> | ||
+ | <td>60 seconds</td> | ||
+ | <td>60 seconds</td> | ||
+ | <td>10,5V</td> | ||
+ | <td>7,6V</td> | ||
+ | <td>506 min (8 hours 26 minutes)</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td style="vertical-align:middle">Deep Sleep</td> | ||
+ | <td>12 hours</td> | ||
+ | <td>12 hours</td> | ||
+ | <td>10,2V</td> | ||
+ | <td>8,2V</td> | ||
+ | <td>5040 min (84 hours 0 minutes)</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td style="vertical-align:middle">Online Deep Sleep</td> | ||
+ | <td>12 hours</td> | ||
+ | <td>12 hours</td> | ||
+ | <td>10,1V</td> | ||
+ | <td>8,0V</td> | ||
+ | <td>2160 min (36 hours 0 minutes)</td> | ||
+ | </tr> | ||
+ | </tr></table> | ||
+ | <br> | ||
+ | {{Template:FMB640_Electrical_characteristics}} | ||
[[Category:FMM640 Manual]] | [[Category:FMM640 Manual]] |
Latest revision as of 15:21, 30 March 2023
Main Page > EOL Products > FMM640 > FMM640 Manual > FMM640 General descriptionTeltonika FMM640 is PROFESSIONAL worldwide tracker with GNSS, LTE CAT M1, NB IoT connectivity, additional GSM backwards compatibility that makes this device usable with newest and most cost efficient technologies. FMM640 features like FMS CAN data (J1939), fuel CAN data (J1708), tachograph live data (K-line), remote tachograph file download, various third party RS232 or RS485 devices support and Dual-SIM will maximize your fleet efficiency. Device supports universal BLE sensors, beacon tags. Terminal is suitable for applications like international logistics, refrigerated transport, agriculture, construction & mining, security & emergency services and even more.
Package contents
Usually the FMM640 device sample is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation. The package contains:
- FMM640 device;
- 4 screws for assembling device
- GPS/GLONASS antenna
- GSM antenna
- USB cable
- Port 1/2 cable
- Port 3 cable
- Ni-MH Rechargeable battery, 8.4V, 550 mA.
- Input and output power supply cable with 2x10 connection pins.
Basic characteristics
Cellular:
- LTE CAT M1/CAT NB1/EGPRS technologies
- 2G bands: Quad-band 800/850/900/1900 MHz
- 4G bands:
- FDD-LTE: B1/ B2/ B3/ B4/ B5/ B8/ B12/ B13/ B18/B19/ B20/ B28
- TDD-LTE: B39 (for Cat.M1 only)
- Data transfer:
- LTE FDD: Max. 375Kbps (DL)/Max.375Kbps (UL)
- LTE TDD: Max. 32Kbps (DL)/Max. 70Kbps (UL)
- GPRS: Max. 107Kbps (DL)/Max. 85.6Kbps (UL)
- SMS (text, data)
GNSS features:
- Tracking: 33/ 99 acquisition channels
- -165 dBM sensitivity
- Hot start <1s
- Warm Start < 25s
- Cold start < 35s
- NMEA-183 protocol
- GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS
- Accuracy < 3m
Hardware features:
- STM32 processor;
- 2 MB internal Flash memory;
- External memory card slot;
- Built-in accelerometer;
- Built-in Blue-tooth 5.0;
- Internal backup battery included;
Interface:
- Integrated KLINE
- Dual CAN J1939
- J1708 CAN
- RS485 and 2x RS232 support
- 4 Digital Inputs for object status monitoring
- 4 Digital Open-collector Outputs (controlling external relays, LED, buzzers, etc.)
- 4 Analog Inputs
- 1-wire interface
- Ni-Mh 550 mAh internal battery
- MicroSD card
- 2 status LED
- Dimensions: L(104,1mm)xW(76,8mm)xH(31,5mm)
- Configuration and firmware update (via FOTA and USB cable)
- External GSM antenna for higher sensitivity
- External GNSS antenna for higher sensitivity
Special features:
- Fast position fix;
- High Quality track even in high density urban canyon;
- Ultra small case;
- Ready for harsh environment;
- Easy to mount in limited access areas;
- Firmly fasten;
- 2 LED status indication;
- Real time tracking;
- Smart data acquisition based on:
- Time;
- Speed;
- Angle;
- Distance;
- Ignition or any other I/O event;
- Sending acquired data via GPRS;
- GPRS and SMS I/O events;
- Virtual odometer;
- Jamming detection;
- Configurable using Secured SMS Commands;
- 1x micro SIM card; 1x eSIM;
- Overvoltage protection;
- Reverse polarity protection;
Description | Voltage | Duration |
---|---|---|
Normal operation |
+10 ... +30 V |
Unlimited |
Protection turns on, device turns off | 34 V | Unlimited |
Maximum voltage | < 70 V | Unlimited |
Maximum voltage impulse | 90 V | 5 ms |
Technical features
Part name | Physical specification |
---|---|
Navigation indication | LED |
Modem indication | LED |
Socket | Soldered inner socket |
USB | Mini USB socket |
GNSS | External GNSS antenna |
GSM | External GSM antenna |
Technical details | |
---|---|
2 W max. Current consumption at 12 V |
GPRS: average 60 mA rms Nominal: average 40 rms GNSS sleep: average 31 mA Deep Sleep: average 4 mA Online Deep Sleep: average 13 mA |
2 W max. Current consumption at 24 V |
GPRS: average 32 mA Nominal: average 22 mA GNSS sleep: average 16 mA Deep Sleep: average 2,6 mA Online Deep Sleep: average 6,7 mA |
Battery charge current | Average 55 mA |
Operating temperature (without battery) | -40..+85 |
Storage temperature (without battery) | -40..+85 |
Storage relative humidity | 5..95% (no condensation) |
Device + case + battery weight | 200 g |
Dimension drawing:
Technical information about internal battery
Internal back-up battery | Battery voltage (V) | Nominal Capacity (mAh) | Charging temperature (°C) |
---|---|---|---|
Ni-MH rechargeable battery | 8.4~10.0 | 550 | 0 – 45 |
Batteries are covered by 6 month warranty support.
Battery tests
The amount of time the device will work from internal battery depends on the battery health, how often the device saves/sends information to the server, external peripherals connected to the device and the results may also differ depending on firmware used.
For general comparison purpose, and to see what results can be achieved, you can refer to the following internal test results in different modes and sending frequencies:
Mode: | Min Period (data saving frequency) | Send Period (data sending frequency) | Starting Voltage | Cut off Voltage | Time achieved |
---|---|---|---|---|---|
Operating | 10 seconds | 60 seconds | 10,1V | 7,6V | 438 min (7 hours 18 minutes) |
Operating | 60 seconds | 60 seconds | 10,5V | 7,6V | 506 min (8 hours 26 minutes) |
Deep Sleep | 12 hours | 12 hours | 10,2V | 8,2V | 5040 min (84 hours 0 minutes) |
Online Deep Sleep | 12 hours | 12 hours | 10,1V | 8,0V | 2160 min (36 hours 0 minutes) |
Electrical characteristics
Characteristic description | Value | |||
---|---|---|---|---|
Min. | Typ. | Max. | Unit | |
Supply Voltage: | ||||
Supply Voltage (Recommended Operating Conditions) |
+10 | +30 | V | |
Digital Output (Open Drain grade): | ||||
Drain current (Digital Output OFF) | 120 | µA | ||
Drain current (Digital Output ON, Recommended Operating Conditions) |
0.5 | A | ||
Static Drain-Source resistance (Digital Output ON) |
400 | 300 | mΩ | |
Digital Input: | ||||
Input resistance (DIN1) | 15 | kΩ | ||
Input resistance (DIN2) | 15 | kΩ | ||
Input resistance (DIN3) | 15 | kΩ | ||
Input voltage (Recommended Operating Conditions) |
0 | Supply voltage | V | |
Input Voltage threshold (DIN1) | 7.5 | V | ||
Input Voltage threshold (DIN2, DIN3, DIN4) | 2.5 | V | ||
Analog Input: | ||||
Input voltage (Recommended Operating Conditions), Range 1 |
0 | +10 | V | |
Input resistance, Range 1 | 120 | kΩ | ||
Input voltage (Recommended Operating Conditions), Range 2 |
0 | +30 | V | |
Input resistance, Range 2 | 147 | kΩ | ||
Output Supply Voltage 1-Wire: | ||||
Supply voltage | +4.5 | +4.7 | V | |
Output inner resistance | 7 | Ω | ||
Output current (Uout > 3.0 V) | 30 | mA | ||
Short circuit current (Uout = 0) | 75 | mA | ||
CAN Interface: | ||||
Internal terminal resistors CAN bus | 120 | Ω | ||
Differential input resistance | 19 | 30 | 52 | kΩ |
Recessive output voltage | 2 | 2.5 | 3 | V |
Differential input resistance | 0.5 | 0.7 | 0.9 | V |
Common mode input voltage | -30 | 30 | V | |
Power supply current (Hardware version with internal battery): | ||||
Deep Sleep, average, Icc.ds | 2.5 | 4 | mA | |
Sleep, average, Icc.ds, Vcc=10V | 45 | mA | ||
Sleep, average, Icc.ds, Vcc=30V | 25 | mA | ||
Ucc=12.6V, all modules fully working, internal battery is charging, Icc1 | 350 | mA | ||
Ucc=12.6V, all modules fully working, internal battery is charging, Icc2 | 300 | mA | ||
Ucc=25.2V, all modules fully working, internal battery is charging, Icc3 | 195 | mA | ||
Ucc=25.2V, all modules fully working, internal battery is charging, Icc4 | 140 | mA | ||
RS232/RS485 Input Voltage: | ||||
RS485 input voltage range on A or B pin (common-mode voltage) | -7 | +12 | V | |
RS232 input voltage range (common-mode voltage) | -15 | +15 | V |
Analog Input error margin can increase if temperature varies. |
Absolute maximum ratings
Characteristic description | Value | |||
---|---|---|---|---|
Min. | Typ. | Max. | Unit | |
Supply Voltage (Absolute Maximum Ratings) |
-32 | +32 | V | |
Drain-Source clamp threshold voltage (Absolute Maximum Ratings), (Idrain = 2 mA) |
+36 | V | ||
Digital Input Voltage (Absolute Maximum Ratings) |
-32 | +32 | V | |
Analog Input Voltage (Absolute Maximum Ratings) |
-32 | +32 | V | |
RS232 Input Voltage (Absolute Maximum Ratings) |
-25 | +25 | V |