Changes

Replaced content with "{{ Template:TATXYZ Bluetooth® settings |model=TAT141 }} Category:TAT141 Configuration"
Line 1: Line 1: −
=Sensors=
+
{{
==Configuring Blue Puck/Coin sensor==
+
Template:TATXYZ Bluetooth® settings
{| style="width: 100%;"
+
|model=TAT141
|[[Image:ELA sensor app.PNG|right|240px|border|class=tlt-border]]
+
}}
Bluetooth® LE Blue Puck and Blue Coin sensors are disabled by default. Configurations to these sensors are written through NFC.<br>
  −
To do this download <b>[https://play.google.com/store/apps/details?id=com.ela.mobileapp.elamobileapp&hl=en_US| Device Manager Mobile]</b> by Ela from <i>Google Play Store</i> to your Android-powered device.<br>
  −
<b>Note!</b> Android-powered device that is used for configuring Blue Puck/Coin sensors must support NFC read/write functionality.<br><br>
  −
 
  −
Follow these instructions to easily configure Blue Puck/Coin Bluetooth® LE sensor:
  −
 
  −
*Enable <code>Bluetooth®</code> and <code>NFC</code> on your Android-powered device.
  −
*Launch <b>Device Manager Mobile</b> on your Android-powered device.
  −
*Select <i>Configuration.</i>
  −
*Place your Android-powered device on top of Blue Puck/Coin sensor to scan it.
  −
*Click <i>Enable</i> to allow Blue Puck/Coin sensor transmit advertising data. If it shows a tick, it is already connected to your  phone.
  −
*We recommend to set <i>Power</i> to 4 to get the best possible distance.
  −
*Set ''BLE Emit Period'' to 1 seconds to get best possible sensor detection.
  −
*Click <i>Write</i> button.
  −
*Place your Android-powered device on top of Blue Puck/Coin sensor to write configuration to it.
  −
 
  −
Once the configuration is written successfully, the Blue Puck/Coin sensor will be enabled and use the settings configured in the APP.<br>
  −
{| class="wikitable" style="border-style: solid; border-width: 0px;"
  −
|+
  −
| style="width: auto; text-align: left; background: #F6F6FB;" |'''NOTE!'''
  −
| style="width: auto; text-align: left; background: #F6F6FB;" |Make sure that <i>Manufacturer data mode</i> is Disabled, otherwise BLE sensor will not be detected without additional changes in the device configuration.
  −
|}
  −
|}
  −
 
  −
==Update Periods==
  −
[[Image:TAT100_BLE_Sensor_configuration_v3.png|{{{general|size}}}|right]]
  −
'''BLE Feature:'''<br>
  −
<code>None</code> – Bluetooth® functionality will be disabled. <br>
  −
<code>Sensors</code> – Enables Bluetooth® functionality for sensors. <br>
  −
 
  −
'''Update frequency''' – how often BLE scanning will run. <br>
  −
'''Scan duration''' – how long scanning will be processed. <br>
  −
 
  −
[[Image:TAT100_BLE_Sensor_configuration.png|1000px|center|border|class=tlt-border]]
  −
 
  −
 
  −
::* [[Image:MAC_nRF_Connect.jpg|right|250px||border|class=tlt-border]] Type your <b>Blue Puck/Coin</b> MAC address in <code>MAC</code> field. You can check what is your <code>MAC</code> address by using [https://play.google.com/store/apps/details?id=no.nordicsemi.android.mcp nRF connect for Mobile] app from <i>Google Play</i>.
  −
::* Configure the sensor fields according to the type of sensor used. More information about these settings can be found on [[#Blue Puck/Coin presets|Blue Puck/Coin presets]] section.
  −
::* After all these steps press <code>Save to device</code> to save configuration.
  −
<br><br><br><br><br><br>
  −
<br>
  −
<br>
  −
<br>
  −
 
  −
 
  −
<hr>
  −
 
  −
{|style="width: 100%;"
  −
To check if the device has already received data from <b>Blue Puck/Coin</b> Bluetooth® LE sensor, follow these steps:
  −
:* Navigate to<code>Status</code> section.
  −
:* Press <code>I/O Info</code> and look if <span style=color:#F6A83E>BLE Temp</span> has any values (depends on the type of sensor being used).
  −
|}
  −
<br>
  −
<br>
  −
{|style="width: 100%;"
  −
[[Image:TAT140_BLE_IO.png|center|1000px|border|class=tlt-border]]
  −
To check if the device has already received data from <b>Blue Puck/Coin</b> Bluetooth® LE sensor, follow these steps:
  −
:* Navigate to<code>I/O</code> section.
  −
:* configure BLE Temp section #1 if you only have one sensor configured.
  −
:* Set sensor priority High to immediately send a record.
  −
:* Select Temperature range ('''Low''' – '''High''')
  −
:* Select Operand:
  −
:**<code>On Entrance</code> – when temperature enters specified range, the device sends a record to the server.
  −
:**<code>On Exit</code> – when temperature exits specified range, the device sends record to the server.
  −
:**<code>On Both</code> – Sends a record when device enters or exits specified range.
  −
:**<code>Monitoring</code> – Performs the BLE scan when the device wakes up for periodic tracking action and sends the data to the server with the periodic record.
  −
 
  −
==Record received to the Server==
  −
:* Device sent a record when it entered the range between 24 – 24.5 C
  −
[[Image:TAT140_BLE_TEMP_Record.png|center|1000px|border|class=tlt-border]]
  −
 
  −
|}
  −
 
  −
==Blue Puck/Coin and EYE presets==
  −
{|style="width: 100%;"
  −
To read data from <b>Blue Puck/Coin and EYE</b> sensors, <span style=color:#F6A83E>Sensor</span> table must be configured with specified parameters to a particular sensor.
  −
 
  −
===Using premade sensor presets===
  −
The configurator includes premade presets for sensors such as Blue PUCK/COIN MOV, MAG, T, RHT and etc.
  −
 
  −
[[File:BLE Presets v2.gif|center]]
  −
 
  −
===Blue Puck/Coin T===
  −
Bluetooth® LE Temperature sensor configuration
  −
<table style="border-collapse: collapse; width:100%;" border="1;">
  −
    <tr style="text-align: center; background: #90c6ff;>
  −
        <th width="10%">Type</th>
  −
        <th width="10%">Data Offset</th>
  −
        <th width="10%">Data Size</th>
  −
        <th width="10%">Action</th>
  −
        <th width="10%">IO</th>
  −
        <th width="10%">Match</th>
  −
        <th width="10%">Endianess</th>
  −
        <th width="10%">Multiplier</th>
  −
        <th width="10%">Offset</th>
  −
    </tr>
  −
    <tr style="text-align: center;">
  −
        <td>FE</td>
  −
        <td>5</td>
  −
        <td>2</td>
  −
        <td>Match</td>
  −
        <td>None</td>
  −
        <td>6E2A</td>
  −
        <td>Little Endian</td>
  −
        <td>1</td>
  −
        <td>0</td>
  −
</tr>
  −
    <tr style="text-align: center;">
  −
        <td>FE</td>
  −
        <td>7</td>
  −
        <td>2</td>
  −
        <td>Save</td>
  −
        <td>Temperature</td>
  −
        <td></td>
  −
        <td>Big Endian</td>
  −
        <td>0.1</td>
  −
        <td>0</td>
  −
</tr>
  −
</table>
  −
<br>
  −
===Blue Puck/Coin RHT===
  −
Bluetooth® LE Temperature and Humidity sensor configuration
  −
<table style="border-collapse: collapse; width:100%;" border="1;">
  −
    <tr style="text-align: center; background: #90c6ff;>
  −
        <th width="10%">Type</th>
  −
        <th width="10%">Data Offset</th>
  −
        <th width="10%">Data Size</th>
  −
        <th width="10%">Action</th>
  −
        <th width="10%">IO</th>
  −
        <th width="10%">Match</th>
  −
        <th width="10%">Endianess</th>
  −
        <th width="10%">Multiplier</th>
  −
        <th width="10%">Offset</th>
  −
    </tr>
  −
    <tr style="text-align: center;">
  −
        <td>FE</td>
  −
        <td>5</td>
  −
        <td>2</td>
  −
        <td>Match</td>
  −
        <td>None</td>
  −
        <td>6E2A</td>
  −
        <td>Little Endian</td>
  −
        <td>1</td>
  −
        <td>0</td>
  −
</tr>
  −
    <tr style="text-align: center;">
  −
        <td>FE</td>
  −
        <td>7</td>
  −
        <td>2</td>
  −
        <td>Save</td>
  −
        <td>Temperature</td>
  −
        <td></td>
  −
        <td>Big Endian</td>
  −
        <td>1</td>
  −
        <td>0</td>
  −
</tr>
  −
    <tr style="text-align: center;">
  −
        <td>FE</td>
  −
        <td>11</td>
  −
        <td>2</td>
  −
        <td>Match</td>
  −
        <td>None</td>
  −
        <td>6F2A</td>
  −
        <td>Little Endian</td>
  −
        <td>1</td>
  −
        <td>0</td>
  −
</tr>
  −
    <tr style="text-align: center;">
  −
        <td>FE</td>
  −
        <td>13</td>
  −
        <td>1</td>
  −
        <td>Save</td>
  −
        <td>Humidity</td>
  −
        <td></td>
  −
        <td>Little Endian</td>
  −
        <td>1</td>
  −
        <td>0</td>
  −
</tr>
  −
</table>
  −
<br>
  −
 
  −
===Blue Puck/Coin MAG===
  −
Bluetooth® LE Magnet sensor configuration
  −
<table style="border-collapse: collapse; width:100%;" border="1;">
  −
    <tr style="text-align: center; background: #90c6ff;>
  −
        <th width="10%">Type</th>
  −
        <th width="10%">Data Offset</th>
  −
        <th width="10%">Data Size</th>
  −
        <th width="10%">Action</th>
  −
        <th width="10%">IO</th>
  −
        <th width="10%">Match</th>
  −
        <th width="10%">Endianess</th>
  −
        <th width="10%">Multiplier</th>
  −
        <th width="10%">Offset</th>
  −
    </tr>
  −
    <tr style="text-align: center;">
  −
        <td>FE</td>
  −
        <td>5</td>
  −
        <td>2</td>
  −
        <td>Match</td>
  −
        <td>None</td>
  −
        <td>062A</td>
  −
        <td>Little Endian</td>
  −
        <td>1</td>
  −
        <td>0</td>
  −
</tr>
  −
    <tr style="text-align: center;">
  −
        <td>FE</td>
  −
        <td>7</td>
  −
        <td>2</td>
  −
        <td>Save</td>
  −
        <td>Custom</td>
  −
        <td></td>
  −
        <td>Little Endian</td>
  −
        <td>1</td>
  −
        <td>0</td>
  −
</tr>
  −
</table>
  −
<br>
  −
 
  −
===Blue Puck/Coin MOV===
  −
Bluetooth® LE Movement sensor configuration
  −
<table style="border-collapse: collapse; width:100%;" border="1;">
  −
    <tr style="text-align: center; background: #90c6ff;>
  −
        <th width="10%">Type</th>
  −
        <th width="10%">Data Offset</th>
  −
        <th width="10%">Data Size</th>
  −
        <th width="10%">Action</th>
  −
        <th width="10%">IO</th>
  −
        <th width="10%">Match</th>
  −
        <th width="10%">Endianess</th>
  −
        <th width="10%">Multiplier</th>
  −
        <th width="10%">Offset</th>
  −
    </tr>
  −
    <tr style="text-align: center;">
  −
        <td>FE</td>
  −
        <td>5</td>
  −
        <td>2</td>
  −
        <td>Match</td>
  −
        <td>None</td>
  −
        <td>062A</td>
  −
        <td>Little Endian</td>
  −
        <td>1</td>
  −
        <td>0</td>
  −
</tr>
  −
    <tr style="text-align: center;">
  −
        <td>FE</td>
  −
        <td>7</td>
  −
        <td>2</td>
  −
        <td>Save</td>
  −
        <td>Custom</td>
  −
        <td></td>
  −
        <td>Little Endian</td>
  −
        <td>1</td>
  −
        <td>0</td>
  −
</tr>
  −
</table>
  −
<br>
  −
 
  −
===EYE SENSOR (Sensors)===
  −
EYE sensor (Sensors mode) configuration
  −
<table style="border-collapse: collapse; width:100%;" border="1;">
  −
    <tr style="text-align: center; background: #90c6ff;>
  −
        <th width="10%">Type</th>
  −
        <th width="10%">Data Offset</th>
  −
        <th width="10%">Data Size</th>
  −
        <th width="10%">Action</th>
  −
        <th width="10%">IO</th>
  −
        <th width="10%">Match</th>
  −
        <th width="10%">Endianess</th>
  −
        <th width="10%">Multiplier</th>
  −
        <th width="10%">Offset</th>
  −
    </tr>
  −
    <tr style="text-align: center;">
  −
        <td>FE</td>
  −
        <td>21</td>
  −
        <td>2</td>
  −
        <td>Save</td>
  −
        <td>Temperature</td>
  −
        <td></td>
  −
        <td>Little Endian</td>
  −
        <td>0.1</td>
  −
        <td>0</td>
  −
</tr>
  −
    <tr style="text-align: center;">
  −
        <td>FE</td>
  −
        <td>23</td>
  −
        <td>1</td>
  −
        <td>Save</td>
  −
        <td>Humidity</td>
  −
        <td></td>
  −
        <td>Little Endian</td>
  −
        <td>10</td>
  −
        <td>0</td>
  −
</tr>
  −
</tr>
  −
    <tr style="text-align: center;">
  −
        <td>FE</td>
  −
        <td>24</td>
  −
        <td>2</td>
  −
        <td>Save</td>
  −
        <td>Custom1</td>
  −
        <td></td>
  −
        <td>Big Endian</td>
  −
        <td>1</td>
  −
        <td>0</td>
  −
</tr>
  −
</tr>
  −
    <tr style="text-align: center;">
  −
        <td>FE</td>
  −
        <td>29</td>
  −
        <td>1</td>
  −
        <td>Save</td>
  −
        <td>Battery</td>
  −
        <td></td>
  −
        <td>Little Endian</td>
  −
        <td>1</td>
  −
        <td>0</td>
  −
</tr>
  −
</table>
  −
<br>
  −
 
  −
===EYE SENSOR (iBeacon & Sensors)===
  −
EYE sensor (iBeacon & Sensors mode) configuration
  −
<table style="border-collapse: collapse; width:100%;" border="1;">
  −
    <tr style="text-align: center; background: #90c6ff;>
  −
        <th width="10%">Type</th>
  −
        <th width="10%">Data Offset</th>
  −
        <th width="10%">Data Size</th>
  −
        <th width="10%">Action</th>
  −
        <th width="10%">IO</th>
  −
        <th width="10%">Match</th>
  −
        <th width="10%">Endianess</th>
  −
        <th width="10%">Multiplier</th>
  −
        <th width="10%">Offset</th>
  −
    </tr>
  −
<tr style="text-align: center;">
  −
        <td>09</td>
  −
        <td>19</td>
  −
        <td>2</td>
  −
        <td>Save</td>
  −
        <td>Custom1</td>
  −
        <td></td>
  −
        <td>Big Endian</td>
  −
        <td>1</td>
  −
        <td>0</td>
  −
</tr>
  −
    <tr style="text-align: center;">
  −
        <td>09</td>
  −
        <td>16</td>
  −
        <td>2</td>
  −
        <td>Save</td>
  −
        <td>Temperature</td>
  −
        <td></td>
  −
        <td>Little Endian</td>
  −
        <td>0.1</td>
  −
        <td>0</td>
  −
</tr>
  −
</tr>
  −
    <tr style="text-align: center;">
  −
        <td>09</td>
  −
        <td>18</td>
  −
        <td>1</td>
  −
        <td>Save</td>
  −
        <td>Humidity</td>
  −
        <td></td>
  −
        <td>Little Endian</td>
  −
        <td>10</td>
  −
        <td>0</td>
  −
</tr>
  −
</tr>
  −
    <tr style="text-align: center;">
  −
        <td>09</td>
  −
        <td>24</td>
  −
        <td>1</td>
  −
        <td>Save</td>
  −
        <td>Battery</td>
  −
        <td></td>
  −
        <td>Little Endian</td>
  −
        <td>1</td>
  −
        <td>0</td>
  −
</tr>
  −
</table>
  −
<br>
  −
 
  −
===EYE SENSOR (Eddystone & EYE Sensors)===
  −
EYE sensor (Eddystone & EYE sensors mode) configuration
  −
<table style="border-collapse: collapse; width:100%;" border="1;">
  −
    <tr style="text-align: center; background: #90c6ff;>
  −
        <th width="10%">Type</th>
  −
        <th width="10%">Data Offset</th>
  −
        <th width="10%">Data Size</th>
  −
        <th width="10%">Action</th>
  −
        <th width="10%">IO</th>
  −
        <th width="10%">Match</th>
  −
        <th width="10%">Endianess</th>
  −
        <th width="10%">Multiplier</th>
  −
        <th width="10%">Offset</th>
  −
    </tr>
  −
<tr style="text-align: center;">
  −
        <td>FF</td>
  −
        <td>7</td>
  −
        <td>2</td>
  −
        <td>Save</td>
  −
        <td>Custom1</td>
  −
        <td></td>
  −
        <td>Big Endian</td>
  −
        <td>1</td>
  −
        <td>0</td>
  −
</tr>
  −
    <tr style="text-align: center;">
  −
        <td>FF</td>
  −
        <td>4</td>
  −
        <td>2</td>
  −
        <td>Save</td>
  −
        <td>Temperature</td>
  −
        <td></td>
  −
        <td>Little Endian</td>
  −
        <td>0.1</td>
  −
        <td>0</td>
  −
</tr>
  −
</tr>
  −
    <tr style="text-align: center;">
  −
        <td>FF</td>
  −
        <td>6</td>
  −
        <td>1</td>
  −
        <td>Save</td>
  −
        <td>Humidity</td>
  −
        <td></td>
  −
        <td>Little Endian</td>
  −
        <td>10</td>
  −
        <td>0</td>
  −
</tr>
  −
</tr>
  −
    <tr style="text-align: center;">
  −
        <td>FF</td>
  −
        <td>12</td>
  −
        <td>1</td>
  −
        <td>Save</td>
  −
        <td>Battery</td>
  −
        <td></td>
  −
        <td>Little Endian</td>
  −
        <td>1</td>
  −
        <td>0</td>
  −
</tr>
  −
</table>
  −
<br>
  −
 
  −
<!--[[Category: General Technical Questions]]-->
  −
 
  −
 
  −
=Backup Tracker=
  −
 
  −
==Introduction to Backup Tracker functionality==
  −
 
  −
TAT141 supports a feature which allows to work as backup tracker. <br>
  −
 
  −
1. Even if Backup tracker is in alarm mode, device will continue to track its position as configured. <br>
  −
2. If FMBXXX device ([[FMB_Compability_table_for_backup_tracker_feature|Compatibility table]]) is turned off, Alarm event from the TAT141 will be received and AVL 236 in the data packet will be sent.<br>
  −
 
  −
==Topology scheme==
  −
 
  −
[[File:422705 VEHICLE BACKUP SECURITY SOLUTION TOPOLOGY 02 (1).png|center|900px]]
  −
 
  −
==Backup feature logic==
  −
 
  −
[[File:TAT100_Backup_feature.png]]
  −
{| class="wikitable" style="background: #0054A6; color: black; border: 2px #0054A6; border-bottom: 1px solid #0054A6;border-top: 1px solid #0054A6;border-left: 1px solid #0054A6;border-right: 1px solid #0054A6;""
  −
|+
  −
| style="width: auto; text-align: left; border: 1px solid #0054A6; border-bottom: 1px solid #0054A6; background: #0054A6; color: white;" |<b>NOTE:</b>
  −
| style="width: auto; text-align: left; border: 1px solid #0054A6; border-bottom: 1px solid #0054A6; background: white;" | '''If TAT141 does not pick up advertised data packets from main tracker, TAT141 enters alarm state, generates and starts sending records with AVL ID 236 (Value 0).'''
  −
|}
  −
 
  −
{| class="wikitable"
  −
|- style="font-weight:bold;"
  −
! Parameter Name
  −
! Description
  −
! ID
  −
! Value
  −
|-
  −
| BLE Feature
  −
| Select which BLE feature is enabled.<br />For Backup Tracker "Backup Tracker" <br />feature has to be selected
  −
| 189
  −
| 0 - None<br />1 - Backup Tracker <br />2 -Sensors
  −
|-
  −
| Central Device IMEI
  −
| IMEI of central device that TAT141 is connected
  −
| 190
  −
| Valid IMEI number
  −
|-
  −
| Update Frequency
  −
| Time in seconds for scanning intervals
  −
| 1100
  −
| Min 5 sec.<br />Max 66535 sec.<br />Default 120 sec.
  −
|-
  −
| Scan Duration
  −
| Time in seconds for how long BLE scan will be running
  −
| 1113
  −
| Up to 60 seconds (Not configurable)
  −
|}
  −
 
  −
==FIRMWARE (MODEM AND BLUENRG) INSTALLATION==
  −
<p align="left">Download Firmware and Configurator from [[TAT100_Stable_firmware | '''STABLE FIRMWARE''']] or [[TAT100_Short-term_firmware |'''SHORT-TERM FIRMWARE''']] pages.</p>
  −
<p align="left"><b> After device connection to Configurator:</b><br>
  −
1) Select Update firmware;<br>
  −
2) Select to flash Firmware(*.e.XIM) file;<br>
  −
3) Click on file;<br>
  −
4) And select Open.<br><br>
  −
Wait until the device will upload the firmware.<br>
  −
 
  −
[[Image:TAT100Firmware.png|center|border|class=tlt-border]]<br>
  −
 
  −
<p align="left"><b>When parameters successfully loaded:</b><br>
  −
1) Select Update firmware;<br>
  −
2) Select to flash BlueNRG firmware(*.bin);<br>
  −
3) Click on file;<br>
  −
4) And select Open.<br><br>
  −
 
  −
[[Image:TAT100NRG.png|center|border|class=tlt-border]]
  −
 
  −
==Instructions==
  −
'''To ENABLE backup feature on TAT141 device:'''
  −
 
  −
# <code>Bluetooth®</code> → select <code>Backup Tracker</code><br>
  −
# Enter main device (FMBxxx/TFT100/TST100/GH5200/TMT250) IMEI<br>
  −
# Set <b>Update frequency</b> to <b>3600</b> (s) – <i>We do not recommend to set values below <b>1800</b> sec. in this field, as it will shorten the battery life.</i><br>
  −
# Configure your <b>APN</b> and Server settings in <b>GPRS</b> section.<br>
  −
 
  −
 
  −
[[File:TAT100_Bluetooth_Backup_v2.png|center|400px]]
  −
 
  −
 
  −
'''To ENABLE backup feature on FMBXXX/TFT100/TST100/GH5200/TMT250 devices:'''
  −
 
  −
1. <code>Bluetooth®</code> → <code>BT Radio</code> set to <code>Enable(visible)</code>
  −
[[File:BT ONN.jpg|center|500px]]
  −
 
  −
2. <code>Bluetooth® 4.0</code> → <code>Backup Tracker</code> set to <code>Enabled</code>
  −
[[File:TAT100_bluetooth_backup_enable.png|center|700px]]
  −
 
  −
==DEVICE RECOGNITION CHECK USING TERMINAL==
  −
* '''Debug mode:'''
  −
Device is able to transmit its current state when connected to PC using USB cable. It is used to detect
  −
errors and provide information to possible solutions when operating as unexpected.
  −
 
  −
# After launching terminal choose baud rate 115200 and hardware control – none.
  −
# Select COM port which is assigned to “Virtual COM Port”.
  −
# Click on ‘Start Log’ button and save a new file.
  −
# Then click ‘Connect’ to start receiving messages from device.
  −
 
  −
[[File:Terminal_debug_TAT100.png|center|600px|border|class=tlt-border]]
  −
Required Terminal application for log capturing can be downloaded here: [http://avl1.teltonika.lt/Downloads/Software/Terminal.zip Terminal] </br>
  −
 
  −
'''TAT141 terminal instructions:'''<br>
  −
 
  −
1. Connect TAT141 to the computer and open it with Terminal as shown in example above. <br>
  −
2. When TAT141 recognizes the main tracker, a terminal will print a line as shown in example below:<br>
  −
<code>[2021.10.26 06:28:40] – [ASSET.UART] << Device MAC: 785ae3d1f9de IMEI 141fa7497ac1 Command 0 Sequence 24 Packet Cnt 5 </code><br>
  −
3. When TAT141 cannot see the main tracker Terminal will print a line as shown in example below:<br>
  −
<code>[2021.10.26 10:50:03] – [ASSET.UART] << [2021.10.26 10:50:03] – [APP.TBT] ERROR! Amount of valid packets does not detect during this period! Triggering alarm </code><br>
  −
 
   
[[Category:TAT141 Configuration]]
 
[[Category:TAT141 Configuration]]

Navigation menu