TEST-DM: Difference between revisions

← Older edit

VisualWikitext

Latest revision as of 10:58, 21 January 2026

[[Category:{{{model}}}]]

This page lists SMS/GPRS commands for the {{{model}}} device.

General information:

A single SMS/GPRS command is limited to 160 characters.
GPRS commands require the Codec 12 protocol.
SMS/GPRS command functioning in Deep Sleep - because the GSM/GPRS module is disabled in Deep Sleep, the device will receive your SMS message only when it exists Deep Sleep (and GPRS commands will not be received at all).

Command Syntax

Before all SMS/GPRS commands, enter the password OR a whitespace (when password is not set).
All commands are case-sensitive.
Always check the syntax of your desired command in its dedicated page.
General command structure:

<password><space><command><space><argument1><space><argument2>...

Examples:

getinfo command, password "1234": 1234 getinfo
getinfo command, password not set: getinfo (note the whitespace before command)
readavl command, password "1234", single argument: 1234 readavl 69
getparam command, password not set, multiple arguments: getparam 2001;2002 (note the whitespace before command)
setparam command, password "1234", multiple arguments with values: 1234 setparam 2001:wap;2002:user;2003:pass

Note! In some Apple iOS devices, any whitespace in the beginning of a message is automatically removed under certain conditions. This may affect SMS parsing in the receiving device.

Command List

Default Commands

These are the default SMS/GPRS commands, applicable for most Teltonika devices.

COMMAND	DESCRIPTION	SYNTAX EXAMPLE
allver	Returns information about device firmware and hardware.	`allver`
battery	Returns information about battery status. If battery is not present voltage and current will return zero value.	`battery`
cpureset	Restarts device.	`cpureset`
deleterecords	Deletes all records inside device.	`deleterecords`
delkey	Deletes current primary key.	`delkey <old_keyword>`
delsecondkey	Deletes current recovery key.	`delsecondkey <old_keyword>`
fwstats	Information regarding firmware update statistics.	`fwstats`
getgps	Returns information string regarding GNSS.	`getgps`
getimeiccid	Returns information about modem IMEI and SIM CCID.	`getimeiccid`
getimsi	Returns IMSI code of currently used SIM card.	`getimsi`
getinfo	Returns information string.	`getinfo`
getops	Returns list of currently visible operators.	`getops`
getparam	Get configured parameter value.	`getparam <param_id1>;<param_id2>;...`
getrecord	Generates a high priority record so force device to send all records to the server.	`getrecord`
getstatus	Get status about device.	`getstatus`
getver	Returns code version, device IMEI, modem app version, RTC time, Init time, etc.	`getver`
getvin	Returns VIN code that is currently used.	`getvin`
ggps	Returns information about current date, time, speed, device coordinates and a link to Google Maps with current position.	`ggps`
readavl	Returns information string regarding AVL ID value.	`readavl <AVL_ID>`
setkey	Set new or change current primary key.	`setkey <old_keyword> <new_keyword>`
setparam	Change configurable parameter value.	`setparam <param_id1>:<value>;<param_id2>:<value>;...`
setsecondkey	Set new or change current recovery key.	`setsecondkey <old_keyword> <new_keyword>`
towingreact	Reactivates towing Detection scenario. Intended for use in case of a fake towing detection event.	`towingreact`
wdlog	Returns information about the recent watchdog events.	`wdlog`
web_connect	Triggers FOTA service/connection.	`web_connect`

Other Commands

These SMS/GPRS commands depend on device hardware or firmware.

COMMAND	DESCRIPTION	SYNTAX EXAMPLE
dr_reset	Erase all Dead Reckoning calibration parameters. After executing the command, the device requires full calibration again.	`dr_reset`
extformat	Quick formats external storage.	`extformat`
fall_down_reset	Triggers fall down reset.	`fall_down_reset`
getcontsens	Returns IDs of active and saved temperature sensors.	`getcontsens`
getio	Returns information string with values of all available IO pin values.	`getio`
oemreset	Clears OEM file from device memory and resets OEM logic. Immediately requests a new OEM file if all conditions are met - VIN is available.	`oemreset`
on_demand_tracking	Toggles on-demand tracking.	`on_demand_tracking <arg>`
savecontsens	Save active sensors IDs or IDs passed as argument.	`savecontsens <id1>,<id2>,<id4>,<id4>,<id5>`

secooff	Stops Seco scenario.	`secooff`
secoon	Starts Seco scenario.	`secoon`
setdigout	Controls specified digital output. Sets/clears DOUTs with optional timeouts and speed thresholds. Accepts as many parameter sets, as your device has DOUTs.	`setdigout ### <Y1> <Y2> <Y3> <Z1> <Z2> <Z3>`
setigndigout	Controls the specified digital output when the ignition is off. DOUTs are controlled dynamically.	`setigndigout ### <Y1> <Y2> <Y3>`

mcan_cmd	Activates sending specified Manual CAN command.	`mcan_cmd: <command_ID>`
mcan_stop	Stops sending specified Manual CAN command.	`mcan_stop: <command_ID>`

cleardtc	Clears OBD DTCs.	`cleardtc <module_id>`
scandtc	Sends selected module fault codes back to user.	`scandtc <module_id>`