(10 intermediate revisions by the same user not shown)
Line 1:
Line 1:
[[Category:{{{model}}}]]
<!---This template works like this:
Use basic text and images everytime, BUT
for "Deactivate by:" parameter values - we maintain in this template a list of standard values, from which which you need to select and copy directly to your Auto Geofence settings page, as plain text, when invoking this template there.--->
This page lists SMS/GPRS commands for the {{{model}}} device.
[[Image:FM auto geofence.png|300px|right]]
'''Auto Geofence''' allows sending notifications if your tracker leaves/re-enters the last known stationary position. Auto Geofence does not require entering coordinates –it requires GNSS visibility.
==General Information==
'''Basic function''': when the tracker has stopped, ignition has been turned off, and “Activation Timeout” has passed, the device automatically creates a geozone of size “Radius” around the last known location. If the device leaves/re-enters this zone, it can send a record.
* A single SMS/GPRS command is limited to 160 characters.
* All commands are case-sensitive.
* GPRS commands require the [[Codec#Codec_12|Codec 12 protocol]].
* SMS/GPRS command functioning in different sleep modes:
* ''getinfo'' command, password not set: <code> getinfo</code> (note the whitespace before command)
* Movement is detected by Movement Source;
* ''readavl'' command, password "1234", single argument: <code>1234 readavl 69</code>
* Deactivation is not performed by the user;
* ''setdigout'' command, password not set, multiple arguments: <code> setdigout 01 30 ? ? 20</code> (note the whitespace before command)
'''''Note!''' In some Apple iOS devices, any whitespace in the beginning of a message is automatically removed under certain conditions. This may affect SMS parsing in the receiving device.''
the tracker starts monitoring GNSS status for the duration of “Activation Timeout”. If GNSS fix is achieved – the timeout pauses and will continue again once all 3 conditions are satisfied. If GNSS fix is not achieved during “Activation Timeout” – the tracker sends an eventual record with AVL ID 175 and value 0 (regardless of if the vehicle moves from or stays in the geozone). This timeout can be reset by triggering “Deactivate by” source, or if movement stops when there is no GNSS fix.
==Command List==
===Default Commands===
'''Auto Geofence parameters''':
These are the default SMS/GPRS commands, applicable for most Teltonika devices.
* Eventual Records - enable or disable Eventual Records functionality.
* Generate Event – configures event generation on auto geofence entrance, exit, or in both cases.
<tr>
* Activation timeout (s) - defines the delay between Ignition OFF and the creation of the auto geofence of size “Radius” around the tracker’s most recent position.
<td style="vertical-align: middle; text-align: left;">Returns information about battery status. If battery is not present voltage and current will return zero value.</td>
<td style="vertical-align: middle; text-align: left;">Returns information about current date, time, speed, device coordinates and a link to Google Maps with current position.</td>
<td style="vertical-align: middle; text-align: left;">Reactivates towing Detection scenario. Intended for use in case of a fake towing detection event.</td>
Auto Geofence allows sending notifications if your tracker leaves/re-enters the last known stationary position. Auto Geofence does not require entering coordinates –it requires GNSS visibility.
Basic function: when the tracker has stopped, ignition has been turned off, and “Activation Timeout” has passed, the device automatically creates a geozone of size “Radius” around the last known location. If the device leaves/re-enters this zone, it can send a record.
“Activation Timeout” has a second function. It works together with GNSS fix to indicate if the tracker moves after GNSS fix is lost:
When the geozone is created, and later these conditions are met:
GNSS fix is lost;
Movement is detected by Movement Source;
Deactivation is not performed by the user;
the tracker starts monitoring GNSS status for the duration of “Activation Timeout”. If GNSS fix is achieved – the timeout pauses and will continue again once all 3 conditions are satisfied. If GNSS fix is not achieved during “Activation Timeout” – the tracker sends an eventual record with AVL ID 175 and value 0 (regardless of if the vehicle moves from or stays in the geozone). This timeout can be reset by triggering “Deactivate by” source, or if movement stops when there is no GNSS fix.
Auto Geofence parameters:
Eventual Records - enable or disable Eventual Records functionality.
Generate Event – configures event generation on auto geofence entrance, exit, or in both cases.
Activation timeout (s) - defines the delay between Ignition OFF and the creation of the auto geofence of size “Radius” around the tracker’s most recent position.
Radius (m) – sets the radius of the auto geofence.
Deactivate by: - select deactivation source.
Send SMS to – selects the number from predefined list for notification.
