Difference between revisions of "FMA setparam"
From Wiki Knowledge Base | Teltonika GPS
(Created page with "{{Template:FMB FW development notice}} Sets new value for parameter. ID consists of 3 or 4 digits. Detailed list of parameters and IDs can be found in chapter number 8 “Par...") |
m (Protected "FMA setparam" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{Template:FMB FW development notice}} | {{Template:FMB FW development notice}} | ||
| + | |||
| + | ==<span>'''setparam # #'''</span>== | ||
Sets new value for parameter. ID consists of 3 or 4 digits. Detailed list of parameters and IDs can be found in chapter number 8 “Parameter List”. <br/> | Sets new value for parameter. ID consists of 3 or 4 digits. Detailed list of parameters and IDs can be found in chapter number 8 “Parameter List”. <br/> | ||
| − | '''Example:''' "setparam 1115 127.0.0.1" will change configured IP address. | + | '''Example:''' "setparam 1115 127.0.0.1" will change configured IP address.<br/> |
| + | |||
| + | ==<span>'''setparam 1271 X/212 X'''</span>== | ||
| + | |||
| + | If X is from 0 to 49, X means index of operator code which has to be configured. Up to 20 operator codes may be configured in 1 SMS. Example: Setparam 1271 16 24602,24603,24605 ,here 16th, 17th and 18th operator codes are set. Note! Other operator codes are left unchanged in the configuration. | ||
Latest revision as of 16:01, 26 March 2021
setparam # #
Sets new value for parameter. ID consists of 3 or 4 digits. Detailed list of parameters and IDs can be found in chapter number 8 “Parameter List”.
Example: "setparam 1115 127.0.0.1" will change configured IP address.
setparam 1271 X/212 X
If X is from 0 to 49, X means index of operator code which has to be configured. Up to 20 operator codes may be configured in 1 SMS. Example: Setparam 1271 16 24602,24603,24605 ,here 16th, 17th and 18th operator codes are set. Note! Other operator codes are left unchanged in the configuration.
