Difference between revisions of "FM6300 K-Line Data"
| Line 1: | Line 1: | ||
{{Template:FMB630_K-Line_Data}} | {{Template:FMB630_K-Line_Data}} | ||
| − | [[Category:FM6300 | + | [[Category:FM6300 Configuration]] |
Latest revision as of 09:27, 5 November 2019
Main Page > EOL Products > FM6300 > FM6300 Configuration > FM6300 K-Line DataK-Line Data functionality allows user to monitor and use incoming data from Tachograph via K-line. Kline periodic record timeout parameter is used to set interval between K-Line records. Those records aren't included in standard record and will be sent as separate packet.
To configure any K-Line parameter, every parameter should be separated with comma. For example, configuring first profile Kline Driver 2 ID by SMS, SMS should look like: “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”) Driver 2 ID do not have High/Low level so they are skipped by using comma “,,“ Other Kline properties can be configured in the same logic.
K-Line front panel supported with Firmware version 00.02.xx
External links
https://wiki.teltonika-gps.com/view/FM63_firmware_errata
https://wiki.teltonika-gps.com/view/FM63XX/FMB630_and_FMB640_and_Tachograph_Solution
