FMB003 GSM Operators settings: Difference between revisions
Kudalevas.da (talk | contribs) (Created page with "{{Template:FMB GSM Operators settings|model=FMB003|sect_sim2=|ctrDaq=Data acquisition settings|pic_operators=Image:Fmb001_gsm_roaming%2B...") |
m (Protected "FMB003 GSM Operators settings" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{Template:FMB GSM Operators settings|model=FMB003|sect_sim2=|ctrDaq=[[FMB003 Data acquisition settings|Data acquisition settings]]|pic_operators=[[Image:Fmb001_gsm_roaming%2Bbl.png|800px|none]]}} | {{Template:FMB GSM Operators settings|model=FMB003|sect_sim2=|ctrDaq=[[FMB003 Data acquisition settings|Data acquisition settings]]|pic_operators=[[Image:Fmb001_gsm_roaming%2Bbl.png|800px|none]]}} | ||
[[Category:FMB003 Configuration]] | |||
Latest revision as of 11:33, 23 January 2020
Main Page > OBD Trackers > FMB003 > FMB003 Configuration > FMB003 GSM Operators settingsGSM settings
Operator lists
FMB003 can work in different modes (use different settings) according to the operator list defined. Operator list is used for Data Acquisition mode switching (see Data acquisition settings section for more details). Modes are changed based on the GSM operator FMB003 is connected to.
Configuring device roaming and blacklist operators is recommended to optimize device performance by mitigating additional latency.
If the roaming operator list is left empty, FMB003 will automatically detect the home operator. If the home operator is written to the roaming operator list, it will still be detected as a home operator. Any operator not in the roaming operator list (except the home operator) will be recognized as an unknown operator and FMB003 will work in Unknown mode (make sure it is configured to allow data sending – GPRS context is enabled).
If the user wants FMB003 to not connect and work with a particular operator it has to be written to Operator Blacklist. Up to 50 operators may be entered into this list.
The Operator search procedure is initiated every 15 minutes. During the search, FMB003 tries to connect to the operator providing the strongest signal. It will prioritize operators that are specified in the operator list. If no operators from the operator list are available, the device will try to connect to an operator from the blacklist. If the device connects to an operator from the blacklist, the best operator search procedure is initiated instantly. During the time when the device is connected to a blacklisted operator, no GPRS connection would be initiated and no data would be sent via GPRS. However, the ability to send SMS commands to the device would remain. If no suitable operator is found on both lists, the device will try to connect to a remaining available operator with the strongest signal.