Difference between revisions of "Template:FMU Features settings"
m |
|||
(15 intermediate revisions by 6 users not shown) | |||
Line 1: | Line 1: | ||
==Eco/Green Driving== | ==Eco/Green Driving== | ||
− | [[Image: | + | [[Image:EcoGreen_Driving.gif|{{{general|size}}}|right]] |
− | When vehicle parameters exceed the values of ''Max Acceleration'', ''Max Braking'' or ''Max Cornering'' parameters, the scenario is activated: a record is generated and digital output status is changed to 1 when configured. You can configure all three parameters in m/s<sup>2</sup> units. | + | When vehicle parameters exceed the values of ''Max Acceleration'', ''Max Braking'' or ''Max Cornering'' parameters, the scenario is activated: a record is generated, and the digital output status is changed to 1 when configured. You can configure all three parameters in m/s<sup>2</sup> units. The scenario is activated until the current Acceleration, Braking, or Cornering value decreases below the set parameter value.<br />Parameters used with ''Eco/Green Driving'' functionality are given in a table below. |
<table class="nd-othertables" style="width: 68%;"> | <table class="nd-othertables" style="width: 68%;"> | ||
Line 30: | Line 30: | ||
<td style="width: 8%; text-align:left">Which source (GPS or accelerometer) data will be collected from.</td> | <td style="width: 8%; text-align:left">Which source (GPS or accelerometer) data will be collected from.</td> | ||
</tr> | </tr> | ||
+ | {{{txt_advanced|<tr> | ||
+ | <td style="width: 8%; text-align:left">[[{{{model|FMB1YX}}} Features settings#Advanced Eco Driving|Advanced Eco Driving]]</td> | ||
+ | <td style="width: 8%; text-align:left">When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. More details about this option is decribed below.</td> | ||
+ | </tr>}}} | ||
+ | <tr> | ||
+ | <td style="width: 8%; text-align:left">Eco/Green Driving Duration</td> | ||
+ | <td style="width: 8%; text-align:left">If enabled, additional record with Eco/Green Driving event duration (ms) will be saved and send to server. When GPS is selected as the data source duration accuracy will be in seconds.</td> | ||
+ | </tr> | ||
+ | {{{txt_ecodout|<tr> | ||
+ | <td style="width: 8%; text-align:left">Output Control</td> | ||
+ | <td style="width: 8%; text-align:left">Which [[{{{model|FMB1YX}}}]] Digital Output will be used for accesory (buzzer, LED and etc.) activation/deactivation.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td style="width: 8%; text-align:left">DOUT ON Duration</td> | ||
+ | <td style="width: 8%; text-align:left">A value in miliseconds (ms), for how long DOUT should be active.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td style="width: 8%; text-align:left">DOUT OFF Duration</td> | ||
+ | <td style="width: 8%; text-align:left">A value in miliseconds (ms), for how long DOUT should be inactive.</td> | ||
+ | </tr>}}} | ||
+ | <!--<tr> | ||
+ | <td style="width: 8%; text-align:left">Send SMS to</td> | ||
+ | <td style="width: 8%; text-align:left">GSM number of receiver which will get notifications of Eco/Green Driving feature.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td style="width: 8%; text-align:left">SMS Text</td> | ||
+ | <td style="width: 8%; text-align:left">SMS text, which the receiver will get.</td> | ||
+ | </tr> --> | ||
</table> | </table> | ||
− | |||
− | |||
− | < | + | {{{FMT100_eco|==Advanced Eco Driving== |
+ | |||
+ | From 03.25.14.Rev.03 base firmware version new '''[[FMB120_Parameter_list|parameter]]''' has been added (Eco Driving Maximum and Eco Driving Average) to '''[[FMT100]]''' device. This parameter is '''enabled''' by default. | ||
+ | |||
+ | When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. When enabled, device does not send Green Driving value IO element '''[[FMT100_Teltonika_Data_Sending_Parameters_ID|254]]'''. | ||
+ | <table class="nd-othertables" style="width: 68%;"> | ||
+ | <tr> | ||
+ | <th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th> | ||
+ | <th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td style="width: 8%; text-align:left;">Eco Driving Average</td> | ||
+ | <td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Average will cause records with Eco Driving event Average value to be saved and send to the server.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td style="width: 8%; text-align:left;">Eco Driving Maximum</td> | ||
+ | <td style="width: 8%; text-align:left;">If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Maximum will cause records with Eco Driving event Maximum value to be saved and send to the server.</td> | ||
+ | </tr> | ||
+ | </table>}}} | ||
+ | |||
===Data output=== | ===Data output=== | ||
---- | ---- | ||
− | Data from accelerometer/GPS are | + | Data from accelerometer/GPS are continuously monitored and processed and are used to decide whether a harsh event has occurred. If either of three cases is satisfied, an event is generated and a record is saved and sent to the server ([[{{{model|FMB1YX}}}]] must be properly configured in order to send the record). Event value is multiplied by 100 before sending/saving records to get more precision when displaying data.{{{text_dout|<br/>}}}<br/><youtube>RlkJELdVGRs</youtube> |
===Auto calibration=== | ===Auto calibration=== | ||
---- | ---- | ||
The auto-calibration process is following: | The auto-calibration process is following: | ||
− | # The vehicle is stopped. | + | |
− | # There is a straight road ahead. | + | #The vehicle is stopped. |
− | # Send SMS ''"auto_calibrate:set"'' to the {{{model_2| | + | #There is a straight road ahead. |
− | # Accelerate to >30 km/h for 5 sec. | + | #Send SMS ''"auto_calibrate:set"'' to the {{{model_2|FMB}}} device. |
− | # {{{model_2| | + | #Accelerate to >30 km/h for 5 sec. |
+ | #{{{model_2|FMB}}} will send a response when calibration is completed successfully. | ||
+ | |||
Calibration is saved to internal flash memory, which means it will stay after a reset. | Calibration is saved to internal flash memory, which means it will stay after a reset. | ||
− | To check auto-calibration status send a following short text message to the {{{model_2| | + | To check auto-calibration status send a following short text message to the {{{model_2|FMB}}} device: ''"auto_calibrate:get"''. |
==Over Speeding== | ==Over Speeding== | ||
− | [[Image: | + | When vehicle speed exceeds configured maximum speed value the scenario is activated, an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Scenario is active until detected speed decreases below the set parameter value. Configurable parameters: |
+ | [[Image:Over_Speeding.gif|{{{general|size}}}|right]] | ||
+ | <br /> | ||
+ | *Scenario settings – defines priority of over speeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic. | ||
+ | *Max speed – it is max allowed speed which can be reached. If speed exceeded configured value, then event will occur. | ||
+ | *Output control – available scenario settings for module Digital output activation/deactivation | ||
+ | *DOUT ON/OFF duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active or inactive. | ||
+ | *Send SMS to – GSM number to which SMS event will be sent. | ||
+ | *SMS text – SMS text. | ||
+ | <br /><br /><br /><br /><br /> | ||
+ | {{{jamming1| | ||
+ | ==Jamming== | ||
+ | |||
− | + | [[Image:Jamming.gif|{{{general|size}}}|right]] | |
− | |||
− | + | When a device detects GSM signal jamming, it activates the Jamming scenario. The device then starts a configurable timeout before responding that is intended to reduce false positives. After the timeout ends, the device generates an event record and digital output status is changed to 1 when configured If the device regains a GSM signal before the countdown ends, no event will be generated and output will not be controlled. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GSM signal jamming to steal your vehicle. | |
+ | |||
+ | Connecting a Buzzer to the Digital Output to emit sounds as soon as jamming is detected is the most straightforward use of this scenario. | ||
+ | |||
+ | The Digital Output can be directly connected to the vehicle's alarm system to ensure the thief can not avoid triggering it. | ||
+ | |||
+ | It can also be connected to the central lock system to ensure that all the doors are locked. | ||
+ | |||
+ | A relay can be used to disable the starter motor. Usually used with the Immobilizer scenario. | ||
− | + | Alternatively, the Digital output can also be connected to an LED visible to the driver to inform the driver when Jamming occurs. | |
− | + | '''Note that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GSM module to save power.''' | |
− | |||
− | + | ''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records. | |
− | {{{dout_control_via_call_feature|== DOUT Control Via Call== | + | For a more visual explanation, take a look at the video made by Teltonika explaining the use-case of Jamming Detection: '''[https://www.youtube.com/watch?v=otQd34WqL54 Teltonika Jamming Detection scenario]''' |
+ | }}} | ||
+ | {{{dout_control_via_call_feature|==DOUT Control Via Call== | ||
− | [[Image: | + | [[Image:DOUT_Control_Via_Call.gif|{{{general|size}}}|right]] |
− | + | The scenario is activated and digital output is ON when a call is received from a number that is on the authorized numbers list.<br/> | |
− | Call control functionality is following: | + | Call control functionality is the following: |
− | * When | + | * When [[{{{model|FMB1YX}}}]] is configured to control {{{text_dout|DOUT1/DOUT2}}} the device waits for an incoming call from a configured secure number. If a call is received [[{{{model|FMB1YX}}}]] turns on {{{text_dout|DOUT1/DOUT2}}} for a user defined ''Duration Timeout''. If duration timeout set to "0" {{{text_dout|DOUT1/DOUT2}}} will be OFF. |
* {{{text_dout|DOUT1/DOUT2}}} can be turned off by ''Duration Timeout'' or by {{{text_din|digital input 1, digital input 2 or digital input 3}}}. | * {{{text_dout|DOUT1/DOUT2}}} can be turned off by ''Duration Timeout'' or by {{{text_din|digital input 1, digital input 2 or digital input 3}}}. | ||
− | * {{{text_dout|DOUT1/DOUT2}}} will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to maximum value (2147483647) which is about 68 years. | + | * {{{text_dout|DOUT1/DOUT2}}} will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to the maximum value (2147483647) which is about 68 years.}}} |
− | |||
− | |||
− | |||
{{{immobilizer_feature|==Immobilizer== | {{{immobilizer_feature|==Immobilizer== | ||
− | [[Image: | + | [[Image:Immobilizer.gif|{{{general|size}}}|right]] |
− | If ''DOUT Control'' is disabled, scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise immobilizer must be repeated. If ''iButton List Check'' parameter is enabled, authorization will be successful only if the attached iButton is specified in iButton list.<br/> | + | If ''DOUT Control'' is disabled, the scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID (or RFID card) is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise, the immobilizer must be repeated. If the ''iButton List Check'' parameter is enabled, the authorization will be successful only if the attached iButton is specified in the iButton list.<br/> |
<br/><br/> | <br/><br/> | ||
− | + | The ignition off timeout parameter is used to set the duration after which authorization is activated when the ignition is turned off. For example, if the Ignition off timeout is set to 30 seconds when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again. | |
− | + | ||
+ | |||
+ | From the firmware version '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_firmware_errata 03.25.14]''' iBeacon authentication was introduced. iBeacon authentication works in the same way as iButton authentication. To use authorized iBeacons, the iBeacon list should be filled in the device configurator. Instructions how to list iBeacons in FMB devices can be found '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_Beacon_List here]'''. | ||
+ | |||
+ | By using iBeacon authorization, the immobilizer feature can be used with devices that don't have a 1-wire data connection available. | ||
+ | <br/><br/><youtube>gjuiJjAejWU</youtube>}}} | ||
{{{ibutton_feature|==iButton Read Notification== | {{{ibutton_feature|==iButton Read Notification== | ||
+ | [[Image:IButton_Read_Notification.gif|{{{general|size}}}||right]] | ||
+ | Output control parameter let user chose which DOUT will iButton blink. After connecting of iButton DOUT will blink for period of time, which configured in DOUT ON Duration parameter. The iButton List checking parameter configures that device reads the iButton ID from list or not. For example if configured as Enabled, device will not blink DOUT unless the iButton is in iButton list. | ||
+ | If Depend on Ignition parameter is enabled then Output will be triggered only if ignition is off (in addition to being in a list if iButton List Checking is also enabled). | ||
+ | Output control examples when iButton is detected (if None is selected in Output Control – all of the following steps will be skipped): | ||
+ | |||
+ | *If both iButton List Checking and Depend on Ignition are disabled – Output is triggered. | ||
+ | *If iButton List Checking is enabled and Depend on Ignition is disabled – Output is triggered only if iButton is in the list. | ||
+ | *If iButton List Checking is disabled but Depend on Ignition is enabled – Output is triggered only if ignition is off. | ||
+ | *If both iButton List Checking and Depend on Ignition are enabled – Output will trigger if iButton is in the list and ignition is off. | ||
− | + | iButton Read Notification parameters: | |
− | + | *Output control – available scenario settings for module Digital output activation/deactivation | |
− | + | *DOUT ON/OFF duration – a value in seconds, for how long {{{text_dout|DOUT1/DOUT2}}} should be active or inactive. | |
+ | *iButton List checking - parameter configures that device reads the iButton ID from list or not. | ||
+ | *Depend on Ignition - Output will be triggered only if ignition is off | ||
+ | <br/><br/>}}} | ||
+ | {{{gnss_fuel| | ||
==GNSS Fuel Counter== | ==GNSS Fuel Counter== | ||
− | [[Image: | + | [[Image:GNSS_Fuel_Counter.gif|{{{general|size}}}|right]] |
+ | |||
+ | To configure ''Fuel Counter'' parameters use fuel consumption norms which are presented in the technical documentation of the vehicle. By default speeds for these fuel consumption norms are: City – 30 km/h, Average - 60 km/h, Highway - 90 km/h. These values can be changed. | ||
− | + | When speed is higher than the highway fuel consumption speed, x% of highway fuel consumption is added every extra y km/h, by default [[{{{model|FMB1YX}}}]] adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * (Highway Fuel Consumption)) at 140 km/h and (1.4 * (Highway Fuel Consumption)) at 190 km/h. | |
− | |||
− | |||
− | |||
− | = | + | ''Correction coefficient'' is used to correct every value of fuel consumption which is sent to the server through an expression of ((Used Fuel) * ''Correction coefficient''). By default, it is 1, with minimum and maximum values of accordingly 0.01 and 2. For example, when the correction coefficient is 1 and [[{{{model|FMB1YX}}}]] calculates that the amount of used fuel over 35 m distance is 20 ml, the value of 20 ml will be sent to the server, and if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server. |
− | + | ''Fuel Consumption on Idling'' is used to calculate fuel consumption when the ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with a minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars and is equal to about 1.5 – 2.0 l/h for gasoline cars. | |
+ | }}} | ||
+ | {{{dout_control_via_ignition_feature|==DOUT Control Via Ignition== | ||
− | This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once the ignition changes state from On to Off after configured Ignition Off timeout, selected DOUT (Digital Output) will be turned On.<br/><br/> | + | [[Image:DOUT_Control_Via_Ignition.gif|{{{dout_control_via_ignition|size}}}|right]] |
+ | |||
+ | This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once the ignition changes state from On to Off after configured Ignition Off a timeout, selected DOUT (Digital Output) will be turned On.<br/><br/> | ||
Turning DOUT Off is possible with enough voltage applied to the configured DIN (Digital Input). Voltage requirements: DIN1 – 7.5V, DIN2-4 – 2.5V.<br/><br/> | Turning DOUT Off is possible with enough voltage applied to the configured DIN (Digital Input). Voltage requirements: DIN1 – 7.5V, DIN2-4 – 2.5V.<br/><br/> | ||
Line 133: | Line 218: | ||
<td style="width: 8%; text-align:left">Duration (in seconds) after which DOUT is turned on, when ignition is turned off</td> | <td style="width: 8%; text-align:left">Duration (in seconds) after which DOUT is turned on, when ignition is turned off</td> | ||
</tr> | </tr> | ||
− | </table> | + | </table>}}} |
+ | |||
+ | ==Ignition ON Counter== | ||
+ | [[File:Ignition on.gif|right]] | ||
+ | '''Ignition ON Counter''' scenario counts the time spent with the ignition in the resolution of seconds. <br> | ||
+ | It is possible to configure a starting value of the counter. Maximum value: '''2147483647''' seconds or 596523.235 hours | ||
+ | '''NOTE THAT''', when entering a starting value, the value must be in seconds! | ||
+ | |||
+ | Example of Ignition On Counter '''I/O''' element: | ||
+ | [[File:Ingintion On counter.gif|left]] | ||
+ | <br></br> | ||
+ | {{{dout_type| | ||
+ | ==DOUT 1 Output Type== | ||
+ | [[File:Dout1 output type.gif|right]] '''DOUT 1 Output Type''' functionality sets the initial ''DOUT1'' state. If functionality is configured in ''Normal'' mode digital output inactive state is low and when it is controlled by any scenario digital output is set to high state. Whenever functionality is configured in ''Inverted'' mode digital output inactive state is high and when it is controlled by any scenario digital output is set to low state.<br></br> | ||
+ | |||
+ | DOUT1 in '''Normal''' state: | ||
+ | [[File:DoutNormal.jpg|thumb|left|500px]] | ||
+ | <br></br><br></br><br></br><br></br></br> | ||
+ | |||
+ | DOUT1 in '''Inverted''' state: | ||
+ | [[File:InvertedDout.png|thumb|left|500px]] | ||
+ | <br></br><br></br><br></br> | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | *'''<u>Notice!</u>''' Digital output type control functionality will not affect SMS/GPRS command '''setdigout''' execution. <br></br> | ||
+ | |||
+ | [[File:Alert.png|50px]] <b>Available from Firmware version: [[ {{{model|}}}_firmware_errata|3.27.07.Rev.00]] </b> | ||
+ | |||
+ | |||
+ | }}} |
Latest revision as of 15:40, 20 October 2021
Eco/Green Driving
When vehicle parameters exceed the values of Max Acceleration, Max Braking or Max Cornering parameters, the scenario is activated: a record is generated, and the digital output status is changed to 1 when configured. You can configure all three parameters in m/s2 units. The scenario is activated until the current Acceleration, Braking, or Cornering value decreases below the set parameter value.
Parameters used with Eco/Green Driving functionality are given in a table below.
Parameter name | Description |
---|---|
Scenario Settings | Enable/Disable Green driving functionality |
Max Acceleration | Value which can be reached while accelerating without triggering harsh acceleration event. |
Max Braking Acceleration | Value which can be reached while braking without triggering harsh braking event. |
Max Cornering Acceleration | Value which can be reached while cornering without triggering harsh cornering event. |
Source | Which source (GPS or accelerometer) data will be collected from. |
Advanced Eco Driving | When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. More details about this option is decribed below. |
Eco/Green Driving Duration | If enabled, additional record with Eco/Green Driving event duration (ms) will be saved and send to server. When GPS is selected as the data source duration accuracy will be in seconds. |
Output Control | Which FMB1YX Digital Output will be used for accesory (buzzer, LED and etc.) activation/deactivation. |
DOUT ON Duration | A value in miliseconds (ms), for how long DOUT should be active. |
DOUT OFF Duration | A value in miliseconds (ms), for how long DOUT should be inactive. |
Advanced Eco Driving
From 03.25.14.Rev.03 base firmware version new parameter has been added (Eco Driving Maximum and Eco Driving Average) to FMT100 device. This parameter is enabled by default.
When this parameter is enabled device uses an advanced Eco Driving algorithm and sends different IO (maximum, average) elements instead of IO to server. When enabled, device does not send Green Driving value IO element 254.
Parameter name | Description |
---|---|
Eco Driving Average | If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Average will cause records with Eco Driving event Average value to be saved and send to the server. |
Eco Driving Maximum | If Eco/Green driving is enabled and accelerometer is selected as the data source, enabling Eco Driving Maximum will cause records with Eco Driving event Maximum value to be saved and send to the server. |
Data output
Data from accelerometer/GPS are continuously monitored and processed and are used to decide whether a harsh event has occurred. If either of three cases is satisfied, an event is generated and a record is saved and sent to the server (FMB1YX must be properly configured in order to send the record). Event value is multiplied by 100 before sending/saving records to get more precision when displaying data.
Auto calibration
The auto-calibration process is following:
- The vehicle is stopped.
- There is a straight road ahead.
- Send SMS "auto_calibrate:set" to the FMB device.
- Accelerate to >30 km/h for 5 sec.
- FMB will send a response when calibration is completed successfully.
Calibration is saved to internal flash memory, which means it will stay after a reset. To check auto-calibration status send a following short text message to the FMB device: "auto_calibrate:get".
Over Speeding
When vehicle speed exceeds configured maximum speed value the scenario is activated, an event record is generated and digital output status is changed to 1 when configured.
Scenario is active until detected speed decreases below the set parameter value. Configurable parameters:
- Scenario settings – defines priority of over speeding scenario: 0 – disabled, 1 – low, 2 – high, 3 – panic.
- Max speed – it is max allowed speed which can be reached. If speed exceeded configured value, then event will occur.
- Output control – available scenario settings for module Digital output activation/deactivation
- DOUT ON/OFF duration – a value in seconds, for how long DOUT1/DOUT2 should be active or inactive.
- Send SMS to – GSM number to which SMS event will be sent.
- SMS text – SMS text.
Jamming
When a device detects GSM signal jamming, it activates the Jamming scenario. The device then starts a configurable timeout before responding that is intended to reduce false positives. After the timeout ends, the device generates an event record and digital output status is changed to 1 when configured If the device regains a GSM signal before the countdown ends, no event will be generated and output will not be controlled. This Digital Output activation can be used to trigger measures to disrupt potential thieves using GSM signal jamming to steal your vehicle.
Connecting a Buzzer to the Digital Output to emit sounds as soon as jamming is detected is the most straightforward use of this scenario.
The Digital Output can be directly connected to the vehicle's alarm system to ensure the thief can not avoid triggering it.
It can also be connected to the central lock system to ensure that all the doors are locked.
A relay can be used to disable the starter motor. Usually used with the Immobilizer scenario.
Alternatively, the Digital output can also be connected to an LED visible to the driver to inform the driver when Jamming occurs.
Note that this scenario will not work with Deep Sleep, Ultra Deep Sleep and Online Deep Sleep modes, since they disable the device's GSM module to save power.
Eventual Records parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise, it will be appended only to eventual records.
For a more visual explanation, take a look at the video made by Teltonika explaining the use-case of Jamming Detection: Teltonika Jamming Detection scenario
DOUT Control Via Call
The scenario is activated and digital output is ON when a call is received from a number that is on the authorized numbers list.
Call control functionality is the following:
- When FMB1YX is configured to control DOUT1/DOUT2 the device waits for an incoming call from a configured secure number. If a call is received FMB1YX turns on DOUT1/DOUT2 for a user defined Duration Timeout. If duration timeout set to "0" DOUT1/DOUT2 will be OFF.
- DOUT1/DOUT2 can be turned off by Duration Timeout or by digital input 1, digital input 2 or digital input 3.
- DOUT1/DOUT2 will always be ON if, for example, DOUT deactivation is set to DIN1, but DIN1 will be never turned ON, or when duration timeout is set to the maximum value (2147483647) which is about 68 years.
Immobilizer
If DOUT Control is disabled, the scenario will only generate events without digital output activation. If DOUT Control is enabled DOUT1/DOUT2 turns ON if ignition turns ON (Ignition Source is configured to 1). After any iButton ID (or RFID card) is attached, DOUT1/DOUT2 turns OFF. After iButton identification configured Ignition Source can be turned OFF (Ignition Source is configured to 0) for no longer than 30 seconds, otherwise, the immobilizer must be repeated. If the iButton List Check parameter is enabled, the authorization will be successful only if the attached iButton is specified in the iButton list.
The ignition off timeout parameter is used to set the duration after which authorization is activated when the ignition is turned off. For example, if the Ignition off timeout is set to 30 seconds when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.
From the firmware version 03.25.14 iBeacon authentication was introduced. iBeacon authentication works in the same way as iButton authentication. To use authorized iBeacons, the iBeacon list should be filled in the device configurator. Instructions how to list iBeacons in FMB devices can be found here.
By using iBeacon authorization, the immobilizer feature can be used with devices that don't have a 1-wire data connection available.
iButton Read Notification
Output control parameter let user chose which DOUT will iButton blink. After connecting of iButton DOUT will blink for period of time, which configured in DOUT ON Duration parameter. The iButton List checking parameter configures that device reads the iButton ID from list or not. For example if configured as Enabled, device will not blink DOUT unless the iButton is in iButton list. If Depend on Ignition parameter is enabled then Output will be triggered only if ignition is off (in addition to being in a list if iButton List Checking is also enabled). Output control examples when iButton is detected (if None is selected in Output Control – all of the following steps will be skipped):
- If both iButton List Checking and Depend on Ignition are disabled – Output is triggered.
- If iButton List Checking is enabled and Depend on Ignition is disabled – Output is triggered only if iButton is in the list.
- If iButton List Checking is disabled but Depend on Ignition is enabled – Output is triggered only if ignition is off.
- If both iButton List Checking and Depend on Ignition are enabled – Output will trigger if iButton is in the list and ignition is off.
iButton Read Notification parameters:
- Output control – available scenario settings for module Digital output activation/deactivation
- DOUT ON/OFF duration – a value in seconds, for how long DOUT1/DOUT2 should be active or inactive.
- iButton List checking - parameter configures that device reads the iButton ID from list or not.
- Depend on Ignition - Output will be triggered only if ignition is off
GNSS Fuel Counter
To configure Fuel Counter parameters use fuel consumption norms which are presented in the technical documentation of the vehicle. By default speeds for these fuel consumption norms are: City – 30 km/h, Average - 60 km/h, Highway - 90 km/h. These values can be changed.
When speed is higher than the highway fuel consumption speed, x% of highway fuel consumption is added every extra y km/h, by default FMB1YX adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * (Highway Fuel Consumption)) at 140 km/h and (1.4 * (Highway Fuel Consumption)) at 190 km/h.
Correction coefficient is used to correct every value of fuel consumption which is sent to the server through an expression of ((Used Fuel) * Correction coefficient). By default, it is 1, with minimum and maximum values of accordingly 0.01 and 2. For example, when the correction coefficient is 1 and FMB1YX calculates that the amount of used fuel over 35 m distance is 20 ml, the value of 20 ml will be sent to the server, and if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server.
Fuel Consumption on Idling is used to calculate fuel consumption when the ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with a minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars and is equal to about 1.5 – 2.0 l/h for gasoline cars.
DOUT Control Via Ignition
This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once the ignition changes state from On to Off after configured Ignition Off a timeout, selected DOUT (Digital Output) will be turned On.
Turning DOUT Off is possible with enough voltage applied to the configured DIN (Digital Input). Voltage requirements: DIN1 – 7.5V, DIN2-4 – 2.5V.
Parameter name | Description |
---|---|
DOUT Control via Ignition Scenario | Enable/Disable DOUT Control Via Ignition scenario |
DOUT Control | Scenario controls configured DOUT if ignition timeout exceeds its limit |
DOUT Deactivation Via DIN | DOUT is turned off if configured DIN is in on (voltage applied) state |
Ignition Off timeout | Duration (in seconds) after which DOUT is turned on, when ignition is turned off |
Ignition ON Counter
Ignition ON Counter scenario counts the time spent with the ignition in the resolution of seconds.
It is possible to configure a starting value of the counter. Maximum value: 2147483647 seconds or 596523.235 hours
NOTE THAT, when entering a starting value, the value must be in seconds!
Example of Ignition On Counter I/O element:
DOUT 1 Output Type
DOUT 1 Output Type functionality sets the initial DOUT1 state. If functionality is configured in Normal mode digital output inactive state is low and when it is controlled by any scenario digital output is set to high state. Whenever functionality is configured in Inverted mode digital output inactive state is high and when it is controlled by any scenario digital output is set to low state.
DOUT1 in Normal state:
DOUT1 in Inverted state:
- Notice! Digital output type control functionality will not affect SMS/GPRS command setdigout execution.
Available from Firmware version: 3.27.07.Rev.00