Template:Fmx150 CAN Config Upload: Difference between revisions

Latest revision as of 14:37, 21 May 2025

FMB150 OEM file upload via FOTA WEB

FMB150 CAN OEM file can be uploaded Over The Air by using FOTA WEB.

In order to download your vehicles CAN configuration please follow a quick and simple step by step guide below. FMB150 device, must be registered in FOTA WEB – device‘s model, firmware version, serial number, and other information must be shown.

1. Select the devices by clicking the check-box next to them
2. Press "Create task" at the top-left corner of the page

3. Select „Upload CAN OEM file“ task type
4. Select Vehicle make and model:

5. Confirm task creation by clicking "Create"

Once the CAN OEM file upload task has been created, task status can be seen in "Tasks" section. Please note, that uploading will start after the next scheduled connection to FOTA WEB (or instant connection, initiated by a command "web_connect"):

When the task is completed you can validate if you have uploaded the correct file by checking the "Device details" tab, where the vehicle make, model and manufacturing years are shown:

@@ Line 1: / Line 1: @@
-{{{title|=='''{{{model|FMB150}}} Configuration Upload'''==}}}
+{{{title|=={{{model|FMB150}}} OEM file upload via FOTA WEB==}}}
-*<b>{{{model|FMB150}}}</b> CAN configuration can be uploaded Over The Air by using FOTA WEB.
+*<b>{{{model|FMB150}}}</b> CAN OEM file can be uploaded Over The Air by using FOTA WEB.
-*In order to download your vehicles CAN configuration please follow a quick and simple step-by-step guide below. {{{model|FMB150}}} device, must be registered in FOTA WEB – device‘s model, firmware version, serial number, and other information must be shown.
+*In order to download your vehicles CAN configuration please follow a quick and simple step by step guide below. {{{model|FMB150}}} device, must be registered in FOTA WEB – device‘s model, firmware version, serial number, and other information must be shown.
-*#Select the devices by clicking the check-box next to them
+. Select the devices by clicking the check-box next to them <br>
-*#Press "Create task" at the top-left corner of the page
+. Press "Create task" at the top-left corner of the page <br>
-*#Select „Upload CAN configuration“ task type
+[[File:CANOEMupl5.png]]  <br>
-*#Select Vehicle Make, and Model :
+. Select „Upload CAN OEM file“ task type <br>
+. Select Vehicle make and model: <br>
+[[File:CANOEMupl6.png]] <br>
+. Confirm task creation by clicking "Create" <br>
+[[File:CANOEMupl7.png]] <br>
 <br/>
-[[File:FMB 150 Upload CAN Configuration.gif|center]]
+*Once the CAN OEM file upload task has been created, task status can be seen in "Tasks" section. Please note, that uploading will start after the next scheduled connection to FOTA WEB (or instant connection, initiated by a command "web_connect"): <br>
-<br/>
+[[File:CANOEMupl8.png]] <br>
-*Once the CAN configuration upload task has been assigned, it can be seen in the main window. Please note, that uploading will start after the next scheduled connection to FOTA WEB (or instant connection, initiated by an SMS command "web_connect"):
+*When the task is completed you can validate if you have uploaded the correct file by checking the "Device details" tab, where the vehicle make, model and manufacturing years are shown: <br>
-*When the update is finished, a new software version can be seen in the details window after the next scheduled connection to FOTA WEB(or instant connection, initiated by an SMS command "web_connect").
+[[File:CANOEMupl9.png]]