Difference between revisions of "GH5200 First Start"
m (Protected "GH5200 First Start" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
|||
(4 intermediate revisions by 2 users not shown) | |||
Line 14: | Line 14: | ||
# Insert '''Micro-SIM ''' card as shown with '''PIN request disabled.''' Make sure that Micro-SIM card '''cut-off''' corner is pointing forward to slot. | # Insert '''Micro-SIM ''' card as shown with '''PIN request disabled.''' Make sure that Micro-SIM card '''cut-off''' corner is pointing forward to slot. | ||
# Insert the '''battery''' as shown to device. Position the battery in place where it does not obstruct other components. | # Insert the '''battery''' as shown to device. Position the battery in place where it does not obstruct other components. | ||
− | # Reattach the '''cover | + | # Reattach the '''cover'''. |
− | [[Image:GH5200 battery sim insert-1.jpg|250px]] [[Image:GH5200 battery sim insert-2.jpg|250px]][[Image:GH5200 battery sim insert-3.jpg|250px]][[Image:GH5200 battery sim insert-4.jpg|250px]] | + | [[Image:GH5200 battery sim insert-1.jpg|250px]] |
− | + | [[Image:GH5200 battery sim insert-2.jpg|250px]] | |
+ | [[Image:GH5200 battery sim insert-3.jpg|250px]] | ||
+ | [[Image:GH5200 battery sim insert-4.1.jpg|250px]] | ||
+ | <table> | ||
+ | <td>[[File:Alert.png|50px|left|link=]]</td> | ||
+ | <td><b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off and battery is disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b></td> | ||
+ | </table> | ||
===PC Connection (Windows)=== | ===PC Connection (Windows)=== | ||
1. Turn on your device by holding the power button for around 7 seconds. | 1. Turn on your device by holding the power button for around 7 seconds. | ||
− | 2. Connect device to computer using '''Micro-USB cable''' or ''' | + | 2. Connect device to computer using '''Micro-USB cable''' or '''Bluetooth®''' connection: |
* Using '''Micro-USB''' cable | * Using '''Micro-USB''' cable | ||
– You will need to install USB drivers, see “How to install USB drivers (Windows)” shown below. | – You will need to install USB drivers, see “How to install USB drivers (Windows)” shown below. | ||
− | * Using ''' | + | * Using '''Bluetooth®''' |
− | – GH5200 | + | – GH5200 Bluetooth® is enabled by default. Turn on '''Bluetooth®''' on your PC, then select '''Add Bluetooth® or other device > Bluetooth®'''. Choose your device named – '''“GH5200_last_7_imei_digits”''', without '''LE''' in the end. Enter default password 5555, press Connect and then select '''Done'''. |
3. You are now ready to use the device on your computer. | 3. You are now ready to use the device on your computer. | ||
Line 32: | Line 38: | ||
===How to install USB drivers (Windows)=== | ===How to install USB drivers (Windows)=== | ||
− | 1. Please download COM port drivers from | + | 1. Please download COM port drivers from '''[[Media:TeltonikaCOMDriver.zip|here]]'''. |
2. Extract and run '''TeltonikaCOMDriver.exe'''. | 2. Extract and run '''TeltonikaCOMDriver.exe'''. | ||
Line 156: | Line 162: | ||
<br/> | <br/> | ||
<p>After successful SMS configuration, {{{model|GH5200}}} device will '''synchronize time''' and '''update records''' to '''configured server'''. | <p>After successful SMS configuration, {{{model|GH5200}}} device will '''synchronize time''' and '''update records''' to '''configured server'''. | ||
− | |||
==Safety information== | ==Safety information== |
Latest revision as of 14:24, 20 February 2024
Main Page > Autonomous Trackers > GH5200 > GH5200 First StartGH5200 is an autonomous personal tracker for lone worker protection.
Know your device
Set up your device
How to insert Micro SIM card and connect the battery
- Remove the cover.
- Insert Micro-SIM card as shown with PIN request disabled. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
- Insert the battery as shown to device. Position the battery in place where it does not obstruct other components.
- Reattach the cover.
![]() |
Micro-SIM card insertion/removal must be performed when device is powered off and battery is disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
PC Connection (Windows)
1. Turn on your device by holding the power button for around 7 seconds.
2. Connect device to computer using Micro-USB cable or Bluetooth® connection:
- Using Micro-USB cable
– You will need to install USB drivers, see “How to install USB drivers (Windows)” shown below.
- Using Bluetooth®
– GH5200 Bluetooth® is enabled by default. Turn on Bluetooth® on your PC, then select Add Bluetooth® or other device > Bluetooth®. Choose your device named – “GH5200_last_7_imei_digits”, without LE in the end. Enter default password 5555, press Connect and then select Done.
3. You are now ready to use the device on your computer.
How to install USB drivers (Windows)
1. Please download COM port drivers from here.
2. Extract and run TeltonikaCOMDriver.exe.
3. Click Next in driver installation window.
4. In the following window click Install button. Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup.
Configuration (Windows)
At first GH5200 device will have default factory settings set. These settings should be changed according to the user's needs.
Main configuration can be performed via Teltonika Configurator software. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
MS .NET requirements | |||
---|---|---|---|
Operating system | MS .NET Framework version | Version | Link |
|
MS .NET Framework 4.6.2 | 32 and 64 bit | www.microsoft.com |
Downloaded Configurator will be in compressed archive. Extract it and launch Configurator.exe. After launch software language can be changed by clicking in the right bottom corner:
Configuration process begins by pressing on connected device:
After connection to Configurator Status window will be displayed:
Various Status info tabs display information about GNSS, GSM, I/O, Maintenance and etc. GH5200 has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using Save to device button. Main buttons offer following functionality:
Load from device – loads configuration from device.
Save to device – saves configuration to device.
Load from file – loads configuration from file.
Save to file – saves configuration to file.
Update firmware – updates firmware on device.
Read records – read records from device.
Reboot device – restarts device.
Reset configuration – sets device configuration to default.
Most important configurator section is GPRS – where all your server and GPRS settings can be configured and Data acquisition – where data acquiring parameters can be configured. More details about GH5200 configuration using Configurator can be found here.
Quick SMS configuration
Default configuration has optimal parameters present to ensure best performance of track quality and data usage.
Quickly set up your device by sending this SMS command to it:
" setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0"
GPRS settings:
- 2001 – APN
- 2002 – APN username (if there are no APN username, empty field should be left)
- 2003 – APN password (if there are no APN password, empty field should be left)
Server settings:
- 2004 – Domain
- 2005 – Port
- 2006 – Data sending protocol (0 – TCP, 1 – UDP)
Note: Before SMS text, two space symbols should be inserted.
After successful SMS configuration, GH5200 device will synchronize time and update records to configured server.
Safety information
This message contains information on how to operate GH5200 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!