Changes

m
no edit summary
Line 82: Line 82:  
===SCAN function===
 
===SCAN function===
 
Scan function can be used when {{{model|FM36YX}}} is connected to CAN adapter and PC (Figure below). After connection is made Press scan button to see available CAN parameters (Note, that car engine must be started). Enable CAN data which needs to be sent to server and save configuration by pressing “Save” button.  
 
Scan function can be used when {{{model|FM36YX}}} is connected to CAN adapter and PC (Figure below). After connection is made Press scan button to see available CAN parameters (Note, that car engine must be started). Enable CAN data which needs to be sent to server and save configuration by pressing “Save” button.  
<br> [[Image:FM36YX_scan_function.png|589px|centre]] <br>
+
<br> [[Image:FM36YX_scan_function.png|589px]] <br>
 
CAN bus data which can be read from your car is shown in “Light Vehicles Can adapter supported cars” document.
 
CAN bus data which can be read from your car is shown in “Light Vehicles Can adapter supported cars” document.
 
===Offline configuration===
 
===Offline configuration===
 
Comming soon
 
Comming soon
 +
User can select which CAN parameter should be sent to server without connection to adapter. Please note that parameters depend on vehicle manufacturer and vehicle model. Please for further information check “Light Vehicles Can adapter supported cars” document.<br>
 +
There are two types of operations with CAN data elements:
 +
* Monitoring of CAN bus data
 +
* CAN bus data event capturing
 +
<br> Monitoring method is used when user wants to receive CAN data on regular basis, for example every 20 seconds.<br>
 +
Event functionality is used to store additional AVL packet when state of CAN element is changing. For example Speed changes, low fuel level, engine temperate, etc. <br>
 +
Send data to server field – allows enabling CAN element so it is added to the AVL data packet and sent to the server. By default, all CAN elements are disabled and {{{model|FM36YX}}} records only GPS data.<br>
   −
<br><br><br><<<<<<<<<<<<<<<<<<<<<<<<<<<<<< IKI cia 3612
+
It is possible to set CAN message priority: On Low Priority, On High Priority, and On Panic. Regular packets are sent as Low priority records. When low priority event is triggered, {{{model|FM36YX}}} makes additional record with indication what was the reason for that was CAN element change. When High priority is selected, module makes additional record with high priority flag and sends event packet immediately to the server by GPRS. Panic priority triggers same actions as high priority, but if GPRS fails, it sends AVL packet to server using SMS mode if SMS is enabled in SMS settings.
>>>>>>>>>>>>>>>>>>> FMB120 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+
<br>
''
+
Data Acquisition Type – defines when to generate event – when value enters defined range, exits it or both, also is possible to select event which you want to generate then you change values, like crossing both values in high and low levels (Hysteresis). High and Low levels – defines CAN value range. If CAN value enter or exits this range, {{{model|FM36YX}}} generates event by “Data Acquisition Type” settings. Figure below show example of {{{model|FM36YX}}} CAN configuration.
Because {{{model|FM36YX}}} have LV-CAN200/ALL-CAN300 RX and TX in its own pinout, device configuration can be performed via micro-USB when CAN adapter is connected to the vehicle.<br/>When {{{model|FM36YX}}} is connected to LV-CAN200 or ALL-CAN300, user can see all information that is received from the vehicle in configurator LVCAN section, all data are highlighted by green background color. Information in this section is automatically refreshed. CAN bus data which can be read from your car is provided in "Light or All Vehicles CAN adapter supported cars" document.<br/>The LVCAN I/O element can be configured like any other I/O element in {{{model|FM36YX}}} configurator.
+
<br>
 +
'''PICTURE''' ?????
 +
<br> [[File:FM36XX_Configurator_LVCAN.png|800px]] <br>
 +
Available CAN Bus IO parameters and configuration can be found in Configurators CAN tab (Figure above) and in  “Parameters ID”. ?????
 +
<br> <br>
 +
AN200/ALL-CAN300 RX and TX in its own pinout, device configuration can be performed via micro-USB when CAN adapter is connected to the vehicle.<br/>When {{{model|FM36YX}}} is connected to LV-CAN200 or ALL-CAN300, user can see all information that is received from the vehicle in configurator LVCAN section, all data are highlighted by green background color. Information in this section is automatically refreshed. CAN bus data which can be read from your car is provided in "Light or All Vehicles CAN adapter supported cars" document.<br/>The LVCAN I/O element can be configured like any other I/O element in {{{model|FM36YX}}} configurator.
   −
[[Image:FMB120_can_conf_example.png|800px|centre]]
+
[[Image:FMB120_can_conf_example.png|800px]]
   −
When using offline configuration method user can select which CAN data will be read from LV-CAN200 or ALL-CAN300 and sent directly to the server without connection to adapter. Please note that parameters depend on vehicle manufacturer and vehicle model. For further information check "Light and All Vehicles CAN adapter supported cars” document.<br/>All information about I/O element parameters description is in section [[{{{model|FM36YX}}} I/O settings|I/O settings]].<br/>All LV-CAN200/ALL-CAN300 I/O parameters configuration settings are described in "{{{model|FM36YX}}} Protocols" document, except ALL-CAN300 bitmasks, which are described in the table below.''
+
When using offline configuration method user can select which CAN data will be read from LV-CAN200 or ALL-CAN300 and sent directly to the server without connection to adapter. Please note that parameters depend on vehicle manufacturer and vehicle model. For further information check "Light and All Vehicles CAN adapter supported cars” document.
 
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
 
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
 +
 +
<br/>All information about I/O element parameters description is in section [[{{{model|FM36YX}}} I/O settings|I/O settings]].<br/>All LV-CAN200/ALL-CAN300 I/O parameters configuration settings are described in "{{{model|FM36YX}}} Protocols" document, except ALL-CAN300 bitmasks, which are described in the table below.''
    
{| class="wikitable"
 
{| class="wikitable"

Navigation menu