Changes

no edit summary
Line 1: Line 1: −
 
+
==Tachograph Data==
 +
<br>
 +
Tachograph Data functionality allows user to monitor and use for incoming data from Tachograph via K-line. Kline periodic record timeout parameter is used to set interval between K-Line records. Those records aren't included in standard record and will be sent as separate packet. Priority settings are used for prioritization of incoming data from different lines. 
 +
<br>
 +
[[File:Fmb630 tacho data.PNG|center]]
 +
<br>
 +
To configure any Tachograph Data parameter, every parameter should be separated with comma. For example, configuring first profile Driver 2 ID by SMS, SMS should look like: “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”) Driver 2 ID does not have High/Low level so they are skipped by using comma “,,“ Other Kline properties can be configured in the same logic.
 +
For more information about tachograph solution visit [[FM63XX/FMB630_and_FMB640_and_Tachograph_Solution|This Page.]]
     

Navigation menu