Changes

{{{pic_idling|[[Image:Fmb640_excessive_idling.png|300px|right]]}}}

{{{pic_idling|[[Image:Fmb640_excessive_idling.png|300px|right]]}}}

If ignition (DIN1 or Power Voltage) is ON and vehicle is not moving, after configured time period FMB640 will generate event. When vehicle starts moving FMB640 after configured time period generate event that vehicle idle time ends. You can configure time it takes to turn on this scenario (Time to Stopped). Scenario is activated until vehicle starts moving and keeps moving (moving is detected only from accelerometer) for amount of time that is configured. You can configure time it takes to turn OFF this scenario (Time to Stopped). .

If ignition (DIN1 or Power Voltage) is ON and vehicle is not moving, after configured time period FMB640 will generate event. When vehicle starts moving FMB640 after configured time period generate event that vehicle idle time ends. Auto Geofencing option can be configured by following parameters:

*Time to stopped - scenario is activated until vehicle starts moving and keeps moving (moving is detected only from accelerometer) for amount of time that is configured.

*Time to moving - scenario is activated until vehicle stops and stays idle (moving is detected only from accelerometer) for amount of time that is configured.

*Start speed threshold - scenario is activated, when vehicle's speed exceeds the ''start speed threshold'' value.

*Stop speed threshold - scenario is activated, when vehicle's speed drops below the ''stop speed threshold'' value.

<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/>

<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/>