Changes

no edit summary
Line 62: Line 62:  
In order to properly configure {{{device|}}} to send SBD records, first it is necessary to select correct RS232 mode in RS-232 / RS 485 tab -  “'''Satellite backup”''' mode must be selected in COM1/COM2 settings.
 
In order to properly configure {{{device|}}} to send SBD records, first it is necessary to select correct RS232 mode in RS-232 / RS 485 tab -  “'''Satellite backup”''' mode must be selected in COM1/COM2 settings.
   −
[[File:RS232 Iridium.gif|frameless]]
+
[[File:RS232 Iridium.gif|left]]
    
In order to get SBD records, you have to connect the device to FMX640 COM1 or COM2 port. Select COM1 or COM2 mode Satellite backup mode. Those settings could be found in RS232/RS485 TAB in the configurator. The Baud rate for satellite devices is 19200 bps. Furthermore, [[TSM232]] functionality should be enabled. These settings can be found in the Features TAB in Short burst data settings. See the picture below.
 
In order to get SBD records, you have to connect the device to FMX640 COM1 or COM2 port. Select COM1 or COM2 mode Satellite backup mode. Those settings could be found in RS232/RS485 TAB in the configurator. The Baud rate for satellite devices is 19200 bps. Furthermore, [[TSM232]] functionality should be enabled. These settings can be found in the Features TAB in Short burst data settings. See the picture below.

Navigation menu