Changes

no edit summary
Line 1: Line 1:  
=='''Firmware'''==
 
=='''Firmware'''==
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
|<strong>Can we delete records from the device memory?</strong>
+
|<strong>Can we delete records from the device memory? </strong>
 
|-
 
|-
 
|You can clear devices memory by clicking "format" button in [Status] window. This will delete all stored records and start anew. You can also send SMS command "sdformat" to the device and it will do the same thing but remotely without the need to connect device to a computer.
 
|You can clear devices memory by clicking "format" button in [Status] window. This will delete all stored records and start anew. You can also send SMS command "sdformat" to the device and it will do the same thing but remotely without the need to connect device to a computer.
Line 7: Line 7:     
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
|<strong>Is it possible to show battery % of EYE sensors/beacons?</strong>
+
|<strong>Is it possible to show battery % of EYE sensors/beacons? </strong>
 
|-
 
|-
 
|No, but it is possible to retrieve the battery voltage and estimate the remaining battery life.
 
|No, but it is possible to retrieve the battery voltage and estimate the remaining battery life.
Line 15: Line 15:     
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
|<strong>What is Autoscan and with how many Teltonika device models is this possible?</strong>
+
|<strong>What is Autoscan and with how many Teltonika device models is this possible? </strong>
 
|-
 
|-
 
|Autoscan is the process of scanning for CANBUS program numbers in the vehicle CANBUS system. Currently, FMB140 has the Autoscan feature.
 
|Autoscan is the process of scanning for CANBUS program numbers in the vehicle CANBUS system. Currently, FMB140 has the Autoscan feature.
Line 21: Line 21:     
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
|<strong>How to access the latest firmware and how to know when the latest firmware has been released?</strong>
+
|<strong>How to access the latest firmware and how to know when the latest firmware has been released? </strong>
 
|-
 
|-
 
| The latest firmware release information is passed through the Teltonika newsletter. It is encouraged that you subscribe to this service to get real-time notifications about the releases.
 
| The latest firmware release information is passed through the Teltonika newsletter. It is encouraged that you subscribe to this service to get real-time notifications about the releases.
Line 28: Line 28:     
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
|<strong>How to activate digital output with SMS command? What commands are available for FMB920?</strong>
+
|<strong>How to activate digital output with SMS command? What commands are available for FMB920? </strong>
 
|-
 
|-
 
| Supported commands can be found here: https://wiki.teltonika-gps.com/view/FMB920_SMS/GPRS_Commands
 
| Supported commands can be found here: https://wiki.teltonika-gps.com/view/FMB920_SMS/GPRS_Commands
Line 35: Line 35:     
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
|<strong>What is the difference between Fuel consumed and Fuel consumed (Counted) or Total mileage and Total Mileage (Counted)?</strong>
+
|<strong>What is the difference between Fuel consumed and Fuel consumed (Counted) or Total mileage and Total Mileage (Counted)? </strong>
 
|-
 
|-
 
| Fuel consumed is the total fuel consumed by the vehicle since manufacturing while fuel consumed (counted) is the fuel consumed by the vehicle since the CAN device was installed.
 
| Fuel consumed is the total fuel consumed by the vehicle since manufacturing while fuel consumed (counted) is the fuel consumed by the vehicle since the CAN device was installed.
Line 41: Line 41:  
|}
 
|}
    +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>Does FMC125 work with the Iridium Edge use case? </strong>
 +
|-
 +
| Yes, Iridium Edge does work with the FMC125 devices - the 03.28.06.Rev.323 firmware has to be used for this solution to work.
 +
More information about the Iridium Edge solution can be found here: https://wiki.teltonika-gps.com/view/Iridium_Edge
 +
|}
 +
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>Is there a way to encrypt the data that is sent to the server? </strong>
 +
|-
 +
| Yes, our devices have TLS encryption capability, which allows us to secure the data using TLS certificates that are uploaded to the device and the server.
 +
More information about TLS encryption can be found here: https://wiki.teltonika-gps.com/view/FMB130_GPRS_settings#TLS.2FDTLS
 +
|}
 +
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>Is there a way to encrypt the data that is sent to the server? </strong>
 +
|-
 +
| Yes, our devices have TLS encryption capability, which allows us to secure the data using TLS certificates that are uploaded to the device and the server.
 +
More information about TLS encryption can be found here: https://wiki.teltonika-gps.com/view/FMB130_GPRS_settings#TLS.2FDTLS
 +
|}
 +
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>Can we check how much data has been used with the current data plan? </strong>
 +
|-
 +
| In the configurator Status tab we have the GPRS traffic section, where data usage can be seen. Other than this, there is no way to get the data consumption from the device - this information will be available from the network provider.
 +
|}
 +
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>Can we check how much data has been used with the current data plan? </strong>
 +
|-
 +
| In the configurator Status tab we have the GPRS traffic section, where data usage can be seen. Other than this, there is no way to get the data consumption from the device - this information will be available from the network provider.
 +
|}
 +
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>Is there a way to implement seat belt detection with FMC920 device? </strong>
 +
|-
 +
| There are 2 methods we can follow:
 +
 +
1. Digital Input: FMC920 device only has 1 Digital input which is mostly used to connect ignition cable, In this use case - Ignition source can be set to power voltage and seatbelt sensor can be connected to Digital input with priority - High and Operand "On change". If the voltage from seat belt sensor is negative, please use relay to convert to positive voltage. Please find screenshot below for reference.
 +
 +
2. Analog Input: Seat belt sensor can be connected to Analog input 1 with priority - high and low level value (depending on the voltage from seatbelt, lets say 12 VDC) - 10 VDC and High level - 13 VDC. Idea is to make the voltage fall between low level and high level value and generate event when the voltage enters that range. If the voltage from seat belt sensor is negative, please use relay to convert to positive voltage. Please find screenshot below for reference.
   −
=='''Software'''==
+
IO Priority guide: https://wiki.teltonika-gps.com/view/FMC920_I/O_settings#High_Priority
 +
 
 +
IO Operand: https://wiki.teltonika-gps.com/view/FMC920_I/O_settings#Operands
 +
 
 +
It is recommend to use FMX130 as the device has Ground sense option which will be easier to connect and also DIN1 can be used for Ignition which will be more accurate
 +
|}
 +
 
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>How do I get a SIM card IMSI number on my server? </strong>
 +
|-
 +
| The IMSI is not available as an IO element, and it will not be sent to the server with records. However, it can be requested by a SMS/GPRS command "getimsi"
 +
|}
 +
 
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>Why does the TAT100 device appear offline on my server? </strong>
 +
|-
 +
| The TAT works always in Deep-sleep mode, and the open link Timeout is 30sec maximum, so the device does not stay connected to the server. This is done to preserve the battery and allow the device to work longer.
 +
|}
 +
 
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>Can I send an SMS or command to the TAT100? </strong>
 +
|-
 +
| Yes, you can send a command to the TAT100 and it will receive this command once it wakes up.
 +
|}
 +
 
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>When does TAT100 connect to FOTA WEB? </strong>
 +
|-
 +
| TAT100 devices do not connect to FOTA Web periodically. It will automatically connect to FOTA Web only on initial startup (when the switch is flipped from OFF to ON position). Connection to FOTA Web should be initiated via the 'web_connect' SMS/GPRS command. This is to preserve battery power.
 +
|}
 +
 
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>When does TAT100 connect to FOTA WEB? </strong>
 +
|-
 +
| TAT100 devices do not connect to FOTA Web periodically. It will automatically connect to FOTA Web only on initial startup (when the switch is flipped from OFF to ON position). Connection to FOTA Web should be initiated via the 'web_connect' SMS/GPRS command. This is to preserve battery power.
 +
|}
 +
 
 +
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 +
|<strong>Can DSM detect 2 or more events at the same time? </strong>
 +
|-
 +
| Yes, it can detect multiple events at the same time. The events are placed in a queue and then reported based on their generation time.
 +
|}
    
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
 
{| class="wikitable mw-collapsible mw-collapsed" role="presentation"
|<strong>What is FOTAWEB and how is it useful? Can you see the device's real-time location?</strong>
+
|<strong>Which SMS encoding is supported by Teltonika Telematics devices? </strong>
 
|-
 
|-
| FOTA Web is simply a device management platform that is used to assign files to the device remotely, such as firmware, configuration files, etc.
+
| The device received commands encoded in Unicode and any third-party SMS portal should have the support of format SMS Default Alphabet while initiating communication with the Teltonika device. FMC devices support SMS Default Alphabet, also known as GSM-7, encoding only - this encoding standard should be configured at the sending device/application.
FOTA Web does not show you the device's realtime location.
   
|}
 
|}
 +
 +
 +
=='''Software'''==

Navigation menu