Custom Scenarios

Introduction to Custom Scenarios functionality

To meet the diverse and evolving needs of our clients, we have developed the Custom Scenarios feature. This solution allows users to define specific conditions using customizable parameters to generate events or control a device’s digital outputs. By connecting the device to peripherals like alarms, buzzers, or relays, this functionality can notify drivers or perform targeted actions seamlessly.

The feature enables the device to operate autonomously based on predefined conditions, eliminating the need for constant monitoring of device status or complex backend integrations. With Custom Scenarios, any data the device can send becomes a potential input for controlling digital outputs, providing flexibility and efficiency.

Custom Scenarios description

Figure 1. “Custom Scenarios” functionality logic

The Custom Scenarios functionality enables configuration of up to three independent scenarios, each with up to three unique triggers. Triggers are defined using data as source from various I/O elements, such as: Fuel Level, Engine RPM, Seatbelt Status, DTC Faults, Movement Status, Ignition State, GSM Signal Level, 1-Wire or Bluetooth sensor temperature and etc. Each source is configured with specific logic operands, threshold values, and an activation delay timer, which specifies how long a value must remain within the defined range before the trigger is activated.

When all triggers of a scenario are 'true', the scenario becomes active. This can generate a record and/or control the Digital Output by toggling it on or off based on the active conditions. Additionally, if configured for continuous operation, the DOUT remains active as long as the conditions are met.

Key features include:

• Support for dynamic trigger logic based on selected operands and conditions.
• Autonomous device operation, even in low-power or deep-sleep modes, provided compatible I/O sources are used.
• Adjustable ON/OFF durations or permanent output control, enabling versatile device behaviors such as blinking or continuous activation.
• Custom Scenarios operate independently from the I/O menu, with priority management ensuring that higher-priority scenarios take precedence in controlling the DOUT when multiple scenarios are configured.

Custom Scenarios configuration and parameters

Configuration UI

Figure 2. “Custom Scenarios” functionality UI

Configuration parameters

Parameter Name	Parameter ID			Value Range		Default Value	Value	Value Definition	Description	Version Introduced
	Custom Scenario 1 ID	Custom Scenario 2 ID	Custom Scenario 3 ID	Min	Max
Priority	19101	19131	19161	0	3	0	0	None	No priority is set for the scenario, eventual records will not be generated.	03.28.06.Rev.260
							1	Low	Low priority is set for the scenario.
							2	High	High priority is set for the scenario.
							3	Panic	Panic priority is set for the scenario.
Output Control	19100	19130	19160	0	3	0	0	None	Specifies that no DOUT is controlled by the scenario.	03.28.06.Rev.260
							1	DOUT1	Specifies that DOUT1 is controlled by the scenario.
							2	DOUT2	Specifies that DOUT2 is controlled by the scenario.
							3	DOUT3	Specifies that DOUT3 is controlled by the scenario.
Permanent Output Control	19124	19154	19184	0	1	0	0	Disabled	DOUT will be controlled continuously on and off according to DOUT ON Duration and DOUT OFF Duration parameters.	03.30.01.Rev.60
							1	Enabled	DOUT will be constantly ON while scenario is active.
DOUT ON Duration	19102	19132	19162	100	65000000	200	-	milliseconds	Duration for which DOUT remains turned ON	03.28.06.Rev.260
DOUT OFF Duration	19103	19133	19163	0	65000000	200	-	milliseconds	Duration for which DOUT remains OFF. If Permanent Output Control and DOUT OFF Duration values are set to 0, DOUT will be turned on for the period configured in DOUT ON Duration parameter.	03.28.06.Rev.260
Source #1	19105	19135	19165	-	-	Device-specific	-	Calculated ID	Data source for primary trigger for the scenario. This trigger cannot be ignored.	03.28.06.Rev.260
Source #2	19110	19140	19170	-	-	Device-specific	-	Calculated ID	Data source for secondary trigger for the scenario. This trigger can be ignored.	03.28.06.Rev.260
Source #3	19116	19146	19176	-	-	Device-specific	-	Calculated ID	Data source for tertiary trigger for the scenario. This trigger can be ignored.	03.28.06.Rev.260
Operand	19106	19136	19166	0	6	0	0	On Exit	Trigger activates on exit of the defined condition.	03.28.06.Rev.260
							1	On Entrance	Trigger activates on entrance of the defined condition.
							2	On Both	Trigger activates on both entrance and exit of the condition.
							3	On Hysteresis	Trigger activates on hysteresis of the condition.
							4	On Change	Trigger activates on any change in the condition.
							5	On Delta Change	Trigger activates on a specified delta change.
							6	Is	Trigger activates as long as source value is in range between Low and High.	03.29.00.Rev.294
Low Level	19107	19137	19167	Dynamic	Dynamic	0	-	-	Sets the lower threshold value for the trigger.	03.28.06.Rev.260
High Level	19108	19138	19168	Dynamic	Dynamic	0	-	-	Sets the upper threshold value for the trigger.	03.28.06.Rev.260
Activation Delay Timer	19109	19139	19169	0	65535	0	-	seconds	Time the trigger must remain true for activation of the scenario.	03.28.06.Rev.263
Ignore	19114	19144	19174	0	1	1	0	No	The trigger will not be ignored and is actively checked.	03.28.06.Rev.260
							1	Yes	The trigger will be ignored and will not affect scenario activation.
Logic	19115	19145	19175	0	1	1	0	OR	Trigger evaluation logic: any enabled trigger activates the scenario.	03.28.06.Rev.263
							1	AND	Trigger evaluation logic: all enabled triggers must be true to activate the scenario.

Output control and eventual record logic

Records are generated when all enabled trigger conditions are met, and the scenario activates, also controlling the configured DOUT state. If the priority is set to "None", no record will be created; however, the scenario will still control the DOUTx if it is configured your configuration. For more details on priority, refer to this page

Eventual record AVL ID list

Custom Scenario	AVL ID	DOUTx State	Record Value
Custom Scenario 1	1163	OFF -> ON	1
		ON -> OFF	0
Custom Scenario 2	1164	OFF -> ON	1
		ON -> OFF	0
Custom Scenario 3	1165	OFF -> ON	1
		ON -> OFF	0

Output control priority management

Custom scenarios can be configured to use the same or different digital outputs. When multiple scenarios are assigned to the same digital output, the scenario with the highest priority takes control when active. Custom Scenario 1 has the highest priority, while Custom Scenario 3 has the lowest. The priorities of all device scenarios:

Priority	Scenario
#1	SECO
#2	Towing
#3	Immobilizer
#4	Private Mode
#5	DOUT Control Via Ignition
#6	Call
#7	Authorized Read Notification
#8	Green Driving
#9	Jamming
#10	Overspeeding
#11	Idling
#12	DOUT Control via SMS
#13	Custom Scenario 1
#14	Custom Scenario 2
#15	Custom Scenario 3
#16	GNSS Jamming
#17	Diagnostic Tool Maintenance

Source value calculation

Source value is the calculated parameter value ID of the selected source. The possible sources depend on the hardware. The sources are based on the I/Os, their parameter value IDs (which are needed when setting sources via commands) can be calculated:

Parameter value ID = (I/O Element AVL ID - I/O Group First Element AVL ID) * 10 + I/O Group AVL ID

I/O Group Name	I/O Group AVL ID	I/O Group First Element AVL ID
Base	50000	0
LVCAN	45100	478
OBD	40100	398

For example: IButton I/O AVL ID is 39, so parameter value ID will be (39 - 0) * 10 + 50000 = 50390. It can be set using setparam command to remotely change configuration of Custom Scenarios source to be IButton remotely. To check element AVL ID list refer to this page.

Examples of use cases

- **Scenario 1**: Control a relay when fuel level drops below 10%. - **Scenario 2**: Trigger a buzzer if RPM exceeds 3000 while ignition is ON. - **Scenario 3**: Activate an alarm when GSM signal strength drops below 20%.