Template:FMB0 Mounting recommendations: Difference between revisions

Revision as of 13:01, 8 May 2018

Safety information
This message contains information on how to operate FMB1YX safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!
The device uses a +10..+16 V DC power supply. The nominal voltage is +12 V DC while the allowed range of voltage is +10..+16 V DC.
To avoid mechanical damage, it is advised to transport the device in an impact-proof package.
Before unmounting the device from the vehicle, ignition MUST be OFF.

Precautions


	Do not disassemble the device. If the device is damaged, the power supply cables are not isolated or the isolation is damaged, DO NOT touch the device before unplugging the power supply.
	All wireless data transferring devices produce interference that may affect other devices which are placed nearby.
	Please consult representatives of your vehicle model regarding OBD II location on your vehicle. In case you are not sure about proper connection, please consult qualified personnel.
	The programming must be performed using a PC with autonomic power supply.
	The device is susceptible to water and humidity.
	Installation and/or handling during a lightning storm is prohibited.
	Teltonika is not responsible for any harm caused by wrong cables used for connection between PC and FMB1YX.
	WARNING! Do not use FMB1YX device if it distracts driver or causes inconvenience due to OBD II placement. Device must not interfere with driver.

@@ Line 1: / Line 1: @@
 <font size="+3"><span style=color:#FF0000>'''Safety information'''</span></font><br/>
 <font size="+2">
-This message contains information on how to operate {{{model|FMB1YX}}} safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!<br/>
+This message contains information on how to operate {{{model|FMB1YX}}} safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!<br/>The device uses a +10..+16 V DC power supply. The nominal voltage is +12 V DC while the allowed range of voltage is +10..+16 V DC.<br/>To avoid mechanical damage, it is advised to transport the device in an impact-proof package.<br/>Before unmounting the device from the vehicle, ignition MUST be OFF.
-The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed range of voltage is +10-30 V DC.<br/>
-To avoid mechanical damage, it is advised to transport the device in an impact-proof package. Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.<br/>
-When connecting the 2x6 connector wires to the vehicle, the appropriate jumpers of the vehicle power supply should be disconnected.<br/>
-Before unmounting the device from the vehicle, the 2x6 connector must be disconnected.<br/>
-The device is designed to be mounted in a zone of limited access, which is inaccessible to the operator. All related devices must meet the requirements of EN 60950-1 standard.<br/>
-The device {{{model|FMB1YX}}} is not designed as a navigational device for boats.<br/>
 </font>