Template:Test-A: Difference between revisions
m Protected "Template:Test-A" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)) |
No edit summary |
||
| Line 1: | Line 1: | ||
==Ignition settings== | |||
[[File:FTC_ignition_resized.gif|right]] | |||
Ignition source will be used to determine the ignition status of the vehicle. | |||
Possible ignition sources: | |||
<!-- If model supports DIN1/DIN2/DIN3, then show --> | |||
{{#if: {{FTX_Pin_Support List|model={{{model}}}|pin=DIN1}} | * '''DIN 1''' - If DIN1 is 1 - ignition is ON; if DIN1 value is 0 - ignition is OFF }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN2}} | * '''DIN 2''' - If DIN2 is 1 - ignition is ON; if DIN2 value is 0 - ignition is OFF }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN3}} | * '''DIN 3''' - If DIN3 is 1 - ignition is ON; if DIN3 value is 0 - ignition is OFF }} | |||
* '''Power Voltage''' - if the voltage is between High Voltage Level and Low Voltage Level (below ''Ignition Settings'' options) - ignition is ON; if the voltage is higher than High Voltage Level or lower than Low Voltage Level - ignition is OFF. | |||
* '''Accelerometer''' - if movement sensor detects movement - ignition is ON; if movement is not detected - ignition is OFF; | |||
More than one ignition source can be selected at the same time. | |||
Revision as of 19:32, 16 September 2025
Ignition settings
Ignition source will be used to determine the ignition status of the vehicle.
Possible ignition sources:
- Power Voltage - if the voltage is between High Voltage Level and Low Voltage Level (below Ignition Settings options) - ignition is ON; if the voltage is higher than High Voltage Level or lower than Low Voltage Level - ignition is OFF.
- Accelerometer - if movement sensor detects movement - ignition is ON; if movement is not detected - ignition is OFF;
More than one ignition source can be selected at the same time.