Template:Test-A: Difference between revisions

Revision as of 19:35, 16 September 2025

Ignition source will be used to determine the ignition status of the vehicle.

Possible ignition sources:

Power Voltage - if the voltage is between High Voltage Level and Low Voltage Level (below Ignition Settings options) - ignition is ON; if the voltage is higher than High Voltage Level or lower than Low Voltage Level - ignition is OFF.
Accelerometer - if movement sensor detects movement - ignition is ON; if movement is not detected - ignition is OFF;

More than one ignition source can be selected at the same time.

@@ Line 5: / Line 5: @@
 Possible ignition sources:
 <!-- If model supports DIN1/DIN2/DIN3, then show -->
-{{#if: {{FTX_Pin_Support List|model={{{model}}}|pin=AIN1}} | AIN1 YES }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN2}} | * '''DIN 2''' - If DIN2 is 1 - ignition is ON; if DIN2 value is 0 - ignition is OFF }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN3}} | * '''DIN 3''' - If DIN3 is 1 - ignition is ON; if DIN3 value is 0 - ignition is OFF }}
+{{#if: {{FTX_Pin_Support List|model={{{model}}}|pin=AIN1}} | AIN1 YES }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=1-Wire}} | 111 W }} {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DIN3}} | * '''DIN 3''' - If DIN3 is 1 - ignition is ON; if DIN3 value is 0 - ignition is OFF }}
 * '''Power Voltage''' - if the voltage is between High Voltage Level and Low Voltage Level (below ''Ignition Settings'' options) - ignition is ON; if the voltage is higher than High Voltage Level or lower than Low Voltage Level - ignition is OFF.
 * '''Accelerometer''' - if movement sensor detects movement - ignition is ON; if movement is not detected - ignition is OFF;
 More than one ignition source can be selected at the same time.