Jump to content
  • EN

Template:Test-A: Difference between revisions

From Teltonika Telematics Wiki
← Older editNewer edit →
VisualWikitext
No edit summary
No edit summary
Line 454: Line 454:
</tr>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.25.14.Rev.03'''<br /> </td>
<td style="vertical-align: middle">'''03.25.14.Rev.03'''</td>
<td style="vertical-align: middle"> </td>
<td style="vertical-align: middle">2019.11.27</td>
<td style="text-align: left; vertical-align: top"> </td>
<td style="text-align: left; vertical-align: top">
*'''[[FMB120_Beacon_List|BLE beacons]]''' '''and''' '''[[FMB120_Bluetooth®_4.0_settings#Bluetooth_4.0_settings|BLE sensors]]''' support added to base release
*'''[[FMB120_Accelerometer_Features_settings#Auto_calibration_rework_and_improvements_from_firmware_version_03.25.07.Rev.00.|Autocalibration]]''' reworked and improved
*New '''[[FMB120_Parameter_list|IO element]]''': Coordinates according to '''[[ISO6709|ISO6709]]'''
*Added '''[[FMB120_System_settings#Multiple_Movement_Sources|Multiple movement source]]''' selection
*'''[[FMB120_Features_settings#Eco.2FGreen_Driving|Advanced eco driving]]''' selections added for '''FMT100'''
*'''[[FMB920_Tracking_on_Demand|On demand tracking]]''' feature added
*Added '''[[FMB920_Tracking_on_Demand|On demand tracking]]''' activation by AIN1/DIN1
*'''[[FMB120_System_settings#New_time_synchronization_method_implementation.2A|Time synchronization]]''' algorithm changed
*'''DOUT Control Via Ignition and DOUT Control Via CALL functionalities has been merged'''
*DIN3 can now be selected as an ignition source
*OBD II data reading improvements
*Bluetooth dongle OBD data reading improvements
*Wake up from ultra-deep sleep improved
*TZBT sensors data reading improvements
*Devices with eSIM communication improvements
*Operators List feature improvements
*CAN adapters data reading improvements
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.25.07.Rev.00'''</td>
<td style="vertical-align: middle">2019.06.10</td>
<td style="text-align: left; vertical-align: top">
*One wire data reading improvements
*Manual geofence configuration improvements
*Data sending in online deep sleep mode optimization
*[[FMB120_Features_settings#DOUT_Control_Via_Ignition| DOUT Control via Ignition]] implementation
*OBD data reading improvements
*SMS command btgetlist improvements
*Periodic sending optimization
*Changed setdigout command response to "DOUT is disabled from CFG" if DOUT is disabled configuration
*Improved SMS responses
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.25.05.Rev.00'''</td>
<td style="vertical-align: middle">2019.05.06</td>
<td style="text-align: left; vertical-align: top">
*'''Added FMB207 support'''
*'''Added FMB964 support'''
*'''Added FMB130 support'''
*'''Added BT3 auto connection mode "User ID"'''
*'''Added UL202-02 fuel sensors functionality'''
*Improved record sending to backup
*Added DOUT3 control for scenarios with FMB130 hardware
*Improved OBD CAN reading
*Add "Always" battery charge mode
*Added codec14 protocol support
*GPS Acquisition improvements
*Improved duplicate lvcan parameters
*OBDII improvements, for ignition off detection and protocol changing
*Add RS485 parity selection
*Improved ECO driving functionality I/O elements manipulation
*Added [[Impulse_counter|impulse counter]] support for FMB130
*Added FW downgrade protection
*Rename BT user ID I/O element text default value
*Added [[FMB120 Bluetooth settings|composed Bluetooth name]] functionality
*Changed minimum & default geofence zone radius to 5 meters
*GPS status update
*Improved Eco Driving detection for FMB20X devices
*Improved baud rate change
*Change Default Time Synchronization value to Disable (GNSS only)
*getops SMS command added
*Only Half ICCID sent to server on ICCID event improvement
*bt getlist improvement
*Added BLE connection control functionality, when service id is configured
*Use speed if LVCAN/OBD speed is 0
*Improved record generating when speed source is configured as OBD/CAN
*Added speed source configuration parameter for scenarios where vehicle speed is needed
*Improved speed jump filter
*Crash trace improvements
*Changed "obdinfo" sms response - returns LAST detected OBD protocol now
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.18.21.Rev.00'''</td>
<td style="vertical-align: middle">2019.02.28</td>
<td style="text-align: left; vertical-align: top">
*Improved OBD data reading
*Changed "obdinfo" sms response
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.18.20.Rev.00'''</td>
<td style="vertical-align: middle">2019.02.21</td>
<td style="text-align: left; vertical-align: top">
*Improved Ultra Deep sleep mode
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.18.19.Rev.00'''</td>
<td style="vertical-align: middle">2019.01.14</td>
<td style="text-align: left; vertical-align: top">
*Improved FMB207 support
*Improved simultaneous DNS requests issue (DNS fails if requesting at same time). Do not affects FM3/FM4 with ext modem
*Improved path creating for NMEA logging file (after sdformat)
*OBD & ELD improvements
*1-Wire Dallas temperature sensors improvements
*Do not allow unauthorized incoming calls if any authorized number is configured
*VIN reset/change on ELD improved
*Changed default battery level sms text to "Battery level %"
*Improved CODEC12 CMD server -> RS232/RS485 data length
*CAN interrupt handling reworked
*Improvement for putting space to APN configuration then it's empty and sim is inserted
*Improved DOUT control over SMS when no DOUTs are enabled
*Reworked external modem power off/on procedures
*Changed SMS cmd "getgps" time source, to prevent zero values when GPS is OFF
*GSM numbers handling rework
*Improvement for Bluetooth communication over BT 3.0
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.18.16.Rev.00'''</td>
<td style="vertical-align: middle">2018.12.04</td>
<td style="text-align: left; vertical-align: top">
*Changed default configuration '''[[Default values changes since FMB firmware version 03.18.16.rev.00|parameters]]''' values
*Improved SIM switch algorithm for DUAL-SIM devices (FMB125, FMB122)
*Added possibility to set [[LV-CAN200|LV-CAN200]], [[ALL-CAN300|ALL-CAN300]], [[CAN-CONTROL|CAN-CONTROL]] program number using SMS command in Online Deep Sleep mode
*Improved RS485 LLS reconfiguring on different positions
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.18.15.Rev.00'''</td>
<td style="vertical-align: middle">2018.11.26</td>
<td style="text-align: left; vertical-align: top">
*The conditions for entering sleep depend on this parameter:<br /> Always / After Time Sync / After Position Fix
*Improved records reading and sending
*Fixed Total Odometer IO values appearing in Trip Odometer IO
*Fixed unexpected GPS LED blinking after wake up from sleep
*UDP data sending improvements
*Fixed CAN CONTROL speed I/O element value parsing
*Fixed Battery Voltage I/O coefficients
*Improved Crash Detection duration calculation
*Changed odometer configuration parameter available min value to 0, while on TCP configuration values is from 1
*Improved auto calibration algorithm
*Improved data sending algorithm
*Removed forced record sending after waking up from deep sleep
*Fixed ELD data sending via BLE
*ELD speed source selection improvements
*Fixed BLE temperature sensors I/O low level configuration
*Changed odometer source switching algorithm (OBD<->GNSS). If OBD data becomes unavailable device will not switch to GNSS source automatically
*Improved crash data packing
*Fixed SMS "odoset:" max value validation
*Fixed device restarts due too many BLE devices in range when performing scanning operation
*Improved LLS data reading stability
*Changed "Engine Oil Temperature" OBD IO element value representation from SIGNED to UNSIGNED
*Increased Odometer max value from 999999 to 4294967
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.18.03.Rev.00'''</td>
<td style="vertical-align: middle">2018.09.25</td>
<td style="text-align: left; vertical-align: top">
*Fixed AIN1 and External Voltage swap for FMB900
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.18.02.Rev.00'''</td>
<td style="vertical-align: middle">2018.09.24</td>
<td style="text-align: left; vertical-align: top">
*Added shadow calibration functionality
*Improved eco driving events functionality
*Improved GNSS hdop&pdop validation
*Fixed LVCAN Fuel Level value coefficient according to IO protocol
*Added Battery level % IO element
*Fixed gps fix acquisition
*Added Configurable BLE transmitting power
*Added ELD support into base OBD FW version
*Improved communication with FOTA WEB
*Reworked IO manager to properly support variable length of IO
*Improved operation in Deep Sleep
*Improved records packing
*Improved crash records generation.
*Improved FW startup speed
*Increased Trip status reading from BTAPP rate
*Improved Idling functionality
*Fixed duplicated record issue
*Improved Bluetooth scanning functionality
*Added OBD DTC, LVCAN DTC IO elements
*Improved Power consumption in sleep mode
*Fixed incomming call detection
*Improved records saving scenario
*Added MIN SPEED protections for ECO DRIVING
*Improved RS232 operation after device initialization
*Improved TZBT data reading
*Improved eco/green driving and crash detection functionalities
*Max packet size increased from 1024 bytes to 1280 bytes
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.10.09.Rev.00'''</td>
<td style="vertical-align: middle">2018.07.03</td>
<td style="text-align: left; vertical-align: top">
*Improved LiPo battery detection
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.10.08.Rev.00'''</td>
<td style="vertical-align: middle">2018.06.25</td>
<td style="text-align: left; vertical-align: top">
*Fixed FOTA WEB hardware detection
*Improved SMS/GPRS command "setdigout" with speed parameter according to documentation (do not trigger DOUTx if GNSS FIX unavailable)
*Added ELD VIN number validation
*Fixed OBD and LVCAN IO current value showing in configurator
*Fixed record sending if mode was changed and send period “0”
*Added FMB125 BLE DualSIM HW support
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.10.03.Rev.00'''</td>
<td style="vertical-align: middle">2018.05.31</td>
<td style="text-align: left; vertical-align: top">
*Added TZ-BT05B sensor support
*Improved BLE scanning
*Improved data sending scenario
*Fixed configuration loading after download via FOTAWEB issue
*Improved DOUT functionality
*Added CAN-CONTROL support
*Changed LVCAN Engine Temperature and LVCAN Fuel Level value coefficient (according IO protocol)
*Added new SMS/GPRS command "getimsi" for IMSI number reading
*Added ELD functionality
*DNS support improvement
*Stability improvements
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.09.01.Rev.00'''</td>
<td style="vertical-align: middle">2018.04.30</td>
<td style="text-align: left; vertical-align: top">
*Improved FOTA WEB functionality
*Improved odometer value calculating from LVCAN (km->m)
*Improved 1-wire operation with long wires
*Improved Bluetooth functionality
*Improved OBD data reading
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.08.05.Rev.00'''</td>
<td style="vertical-align: middle">2018.04.18</td>
<td style="text-align: left; vertical-align: top">
*Improved Static Navigation filter
*Improved Crash Detection scenario
*Improved device connection to configurator after FW update
*Updated LVCAN protocol to support 4 and 5 digits numbers
*BT functionality optimization
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.07.07.Rev.00'''</td>
<td style="vertical-align: middle">2018.04.05</td>
<td style="text-align: left; vertical-align: top">
*Improved simultaneous use of several Bluetooth connections
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.07.06.Rev.00'''</td>
<td style="vertical-align: middle">2018.03.19</td>
<td style="text-align: left; vertical-align: top">
*Fixed IO elements High/Low config parameters negative values saving
*Improved OBD communication
*Improved Outgoing Call trigger conditions
*Improved VIN reading
*Record saving optimization
*Improved iButton expire time calculation
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.07.01.Rev.00'''</td>
<td style="vertical-align: middle">2018.03.02</td>
<td style="text-align: left; vertical-align: top">
*OBD pinout for FM3 improvement
*Improved data sending
*Improved FOTA WEB configuration sending
*Changed GPS state values reporting in SMS "getinfo" according documentation
*Improved Crash Detection
*Added GPRS OPEN timeout for FOTA WEB
*Improved UNLOCK key generation for keyword restoring
*LiPo battery charging optimization
*'''Added FMB2YX hardware support'''
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.06.04.Rev.00'''</td>
<td style="vertical-align: middle">2018.02.12</td>
<td style="text-align: left; vertical-align: top">
*Improved record storing and sending algorithm
*Improved communication with accelerometer
*Improved firmware update handling with internal flash memory
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.06.01.Rev.00'''</td>
<td style="vertical-align: middle">2018.01.29</td>
<td style="text-align: left; vertical-align: top">
*'''BLE functionality added'''
*Improved OBD request functionality
*Improved record search and sending scenario
*Fixed SD storage (used/total) info displaying
*Added OBD stuck protection
*Improved logging
*Improved movement detection in sleep modes
*'''Added SMS "getrecord" for High prio record generation'''
*Added fix for GPRS authentication pap/chap
*'''Added Ultra Deep Sleep functionality'''
*Improved LiPo charging algorithm
*'''Added support of FM30XY hardware'''
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.03.07.Rev.00'''</td>
<td style="vertical-align: middle">2018.01.03</td>
<td style="text-align: left; vertical-align: top">
*'''New parameter for SMS event compositor: %gmap – provides Google Maps link in SMS event message'''
*Improvement for OBD data display in Configurator Status window
*Improved Ignition and Movement detection by CAN data (OBD/LVCAN)
*Improved iButton IO event generation after sleep mode
*Fixed Trip odometer precision when counting mode is “Between records”
*Fixed “setdigout” command usage on FMB9YX
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.03.06.Rev.00'''</td>
<td style="vertical-align: middle">2018.01.03</td>
<td style="text-align: left; vertical-align: top">
*Fixed GPS speed value
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.03.03.Rev.00'''</td>
<td style="vertical-align: middle">2017.12.05</td>
<td style="text-align: left; vertical-align: top">
*Added iButton ID inversion to solve incompatibility with FMA
*Added additional iButton family ID’s
*Improved backup server triggering if main server DNS request fails
*Removed Ios generation in deep/online sleep for EcoScore, Dallas Temp/ID, iButton, RFID, LLS
*Enabled GSM I/O’s in online sleep
*Added setdigout dependency on speed. DOUT change is not executed while speed is too high.
*GPS version string truncated in “getver” SMS response
*Movement detection sensitivity decreased
*Improvement in records manager to prevent records corruption
*High priority events are not checking to send period now
*Towing IO reset on feature reactivation added
*Fixed FOTA WEB issue when APN has login and password
*'''Major stability improvement patch!'''
*Added immobilizer state restore on startup
*SMS sending is now aborted after 3 unsuccessful attempts
*'''SMS events text composition added.''' You can add additional parameters to SMS text
*Improved HID RFID reading in FMB125
*'''Added Green Driving Duration IO element (AVL ID: 243)'''
*Fixed SIM PIN change via Bluetooth
*'''RS232 buffered modes added'''
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.02.03.Rev.00'''</td>
<td style="vertical-align: middle">2017.10.17</td>
<td style="text-align: left; vertical-align: top">
*Updated GPS FW (Galileo satellites are used now too)
*Auto calibration procedure improved
*Added new LV-CAN200 parameters: CNG Status, CNG Used, CNG Level, OIL Level, Engine Temperature
*Added “getimeiccid” SMS/GPRS command
*IMEI packaging for UDP fixed
*Crash Trace fixed
*BTAPP application improvement
*OBD PID data requesting when VIN unavailable fixed
*Fake overspeeding events are now filtered out
*Fixed BT name autogenerating if empty
*Fixed records sending via UDP
*Autoconnect to FotaWeb on power ON and after “cpureset“ added
*OBD protocol detection improvements
*GNSS (used for records) data while device is in GPS sleep / deep sleep / online deep sleep fixed
*Changed BT DEFAULT name autogeneration by device type
*Improved SD present and mounted state detection
*Removed check for AIN min value 500mV
*Records sending by min saved records fix
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''03.01.04.Rev.00'''</td>
<td style="vertical-align: middle">2017.09.06</td>
<td style="text-align: left; vertical-align: top">
*New feature: NMEA via Bluetooth
*New feature: Read records
*New feature: iButton reading notification via DOUT.
*New SMS/GPRS command: getvin (Returns vehicle VIN number. Aplicable for FMB001, or other FMB devices with connected OBDII dongle)
*BTAPP protocol updated
*Improvements in records sending (fixes increased traffic usage)
*Improved configuration saving time
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''01.03.13.Rev.00'''</td>
<td style="vertical-align: middle">2017.11.07</td>
<td style="text-align: left; vertical-align: top">
*Improved overall device stability
*Fixed Bluetooth Data Link.
*Fixed Bluetooth name auto-generating if empty.
*Fixed Bluetooth clear all Paired device list from configurator.
*Fixed records sending via UDP.
*Fixed IMEI packaging for UDP.
*Improved SMS login/pass validator. All characters are now allowed.
*Added protection for OBD Odometer value reset.
*Added protection for IMEI corruption.
*Fixed bad records detector.
*Added call functionality (when event detected) in Deep Sleep mode.
*Restart protection fixed.
*Improvements in SIM PIN setting.
*Changed default FOTA WEB Domain.
*Fixed OBD PID data requesting when VIN unavailable.
*OBD protocol detection improvements.
*Modem power ON improvements.
*NTP improvements.
*Added “getimeiccid” SMS/GPRS command.
*SMS/GPRS command “sdformat” improvements.
*SMS Login/Pass validator improvements.
*Removed check for AIN min value 500mV.
*Added additional IO High/Low-level setter by ParamID.
*Fixed SMS processing state check in modem SLEEP mode setter.
*FOTA functionality improvement.
*Added protections by GSM number and text length.
*IO event External Voltage DeltaChange improvements.
*Fixed issues with double records, bad records, record search.
*Fixed microSD to RAM switching for records saving.
*Added retries for unsuccessful outgoing call.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''01.03.11.Rev.00'''</td>
<td style="vertical-align: middle">2017.10.19</td>
<td style="text-align: left; vertical-align: top">
*Fixed Crash detection functionality.
*Battery charging improvement.
*Record sending via UDP fixed.
*Record sending in DeepSleep improvement.
*FOTA WEB functionality improvement.
*Added protection for IMEI corruption.
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''01.03.03.Rev.00'''</td>
<td style="vertical-align: middle">2017.07.24</td>
<td style="text-align: left; vertical-align: top">
*Added FOTA WEB functionality
*Optimization of power consumption in sleep modes
*GNSSS IO Text "GNSSpower" changed to "GNSSStatus"
*Added zero filling the ibutton values
*Enabled IOs GNSS, Total Odometer in dsleep mode
*Improved getio SMS response for FMB125
*Added CCID validity check before PIN registration
*Minimized power consumptions in sleep modes
*Added SD card check before it’s usage
*Changed excessive idling default/max values
*DUAL SIM functionality implementation
*PIN Entering to second SIM improvement
*SMS/GPRS getgps command improvement
*Added dual server support
*Operator Black list implementation
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''01.00.32.Rev.00'''</td>
<td style="vertical-align: middle">2017.07.10</td>
<td style="text-align: left; vertical-align: top">
*Authorized GSM numbers list increased to 200
*Unplug feature improvement
*SMS command 'sdformat' – deletes all internal memory
*SMS command ‘deleterecords’ – deletes Avl records from memory
*Faster GPS FIX after leaving sleep mode
*‘odoset’ SMS command fixed
*Excessive Idling functionality improvement
*DOUT state is restored on startup
*Towing activation timeout max value increased
*Averaging now works in Deep Sleep mode too
*Minor OBD improvements
*Bluetooth pairing improvements
*FMB962/FMB964 hardware support added
*Records sending when link is open fixed
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''01.00.30.Rev.05'''</td>
<td style="vertical-align: middle">2017.05.26</td>
<td style="text-align: left; vertical-align: top">
*Added 5 geozones functionality
*IO elements ICCID and SD Status are added
*Added Keyword functionality
*Crash detection improvement, now it detects consecutive events
*Towing Detection improvement
*Unplug detection improvement
*GPRS connection stability improvement
*Improved Unplug detection – now detects “plug” events too
*Data sending  without microSD card
*getgps SMS commands format fixed
*Default configuration changed – allow sending in roaming and unknown modes
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''01.00.22.Rev.12'''</td>
<td style="vertical-align: middle">2017.04.13</td>
<td style="text-align: left; vertical-align: top">
*Improved connection to GSM operators
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''01.00.22.Rev.11'''</td>
<td style="vertical-align: middle">2017.04.07</td>
<td style="text-align: left; vertical-align: top">
*Improved LiPo battery charger state interpretation
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''01.00.22.Rev.09'''</td>
<td style="vertical-align: middle">2017.03.28</td>
<td style="text-align: left; vertical-align: top">
*Updated GPS firmware version
*Hardware detection improvement
</td>
</tr>
<tr style="text-align: center; vertical-align: middle;">
<td style="vertical-align: middle">'''01.00.22.Rev.06'''</td>
<td style="vertical-align: middle">2017.03.14</td>
<td style="text-align: left; vertical-align: top">
*Corrected “Green driving” values: “m/s2”  conversion to “g”
*SIM PIN entering fixed.
*SMS Reading improved. Don't go to DeepSleep if there are SMS to read in memory.
*GPS Fuel Counter fix.
*Jamming detection improvement.
*AutoGeofence functionality improvement.
</td>
</tr>
</tr>
</table>
</table>
}}
}}

Revision as of 13:44, 25 September 2025

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:Test-A&oldid=107815"