Template:ATX Data Sending Parameters ID

Teltonika devices send data in packets that follow a specific structure, as defined on our Codec page. Each parameter in a record is identified by a Data Sending ID (AVL ID). These IDs are used to extract the correct values from the hexadecimal data during processing on the server side.

This page lists all available AVL IDs for {{{model}}}. Differences in AVL IDs between the FT and legacy FMB platforms are described on the dedicated page. Property IDs in the AVL packet that differ between platforms are marked in bold.

AVL IDs are grouped into the following parameter groups:

Eventual I/O elements

---

Property ID in AVL packet	Property Name	Bytes	Type	Min Value	Max Value	Multiplier	Units	Description	Parameter Group
16	Total Odometer	4	Unsigned	0	2147483647	-	m	Virtual odometer value	Permanent I/O elements
17	Axis X	2	Signed	-8000	8000	-	mg	Axis X value	Permanent I/O elements
18	Axis Y	2	Signed	-8000	8000	-	mg	Axis Y value	Permanent I/O elements
19	Axis Z	2	Signed	-8000	8000	-	mg	Axis Z value	Permanent I/O elements
21	GSM Signal	1	Unsigned	0	5	-	-	Value in range 1-5	Permanent I/O Elements
67	Battery Voltage	2	Unsigned	0	65535	-	mV	Voltage	Permanent I/O elements
68	Battery Current	2	Unsigned	0	65535	-	mA	Current	Permanent I/O elements
69	GNSS Status	1	Unsigned	0	3	-	-	0 - GNSS OFF 1 - GNSS ON with fix 2 - GNSS ON without fix 3 - GNSS sleep	Permanent I/O elements
70	PCB temperature	2	Signed	-550	1150	-	°C	Degrees	Permanent I/O elements
113	Battery level	1	Unsigned	0	100	-	°C	Battery capacity level	Permanent I/O elements
181	GNSS PDOP	2	Unsigned	0	500	-	m	GNSS position dilution of precision. Normal PDOP is below 3 – the lower the number, the more accurate reported location is.	Permanent I/O elements
182	GNSS HDOP	2	Unsigned	0	500	-	m	GNSS horizontal dilution of precision. Normal HDOP is below 2 – the lower the number, the more accurate reported location is.	Permanent I/O elements
199	Trip Odometer	4	Unsigned	0	2147483647	-	m	Trip distance value calculated by GNSS	Permanent I/O elements
205	GSM Cell ID	4	Unsigned	0	2147483647	-	-	GSM base station ID	Permanent I/O elements
206	GSM Area Code	2	Unsigned	0	65535	-	-	Location Area code (LAC), it depends on GSM operator. It provides unique number which assigned to a set of base GSM stations	Permanent I/O elements
237	Network Type	1	Unsigned	0	1	-	-	0 - 3G 1 - GSM 2 - 4G 3 - LTE CAT M1 4 - LTE CAT NB1 99 - Unknown	Permanent I/O elements
240	Movement	1	Unsigned	0	1	-	-	0 – Movement Off 1 – Movement On	Permanent I/O Elements
241	GSM operator code	4	Unsigned	0	4294967295	-	-	Currently used GSM Operator code	Permanent I/O elements
303	Instant Movement	1	Unsigned	0	1	-	-	Logic: 0/1 returns movement value	Permanent I/O elements
386	Time from last fix	2	Unsigned	0	65535	-	sec	-	Permanent I/O elements