FMB900 Status info: Difference between revisions
(Created page with "{{Template:FMB1 LED status|model=FMB900}}") |
mNo edit summary |
||
| Line 1: | Line 1: | ||
{{Template:FMB1 LED status|model=FMB900}} | {{ | ||
Template:FMB1 LED status | |||
|model=FMB900 | |||
|txt_fmb0=''OBD Info'' shows the main OBD information (when the device connected to the vehicle via OBD II Bluetooth dongle adapter): vehicle VIN code and OBD protocol used.<br/> | |||
}} | |||
Revision as of 08:59, 24 May 2018
Main Page > Basic Trackers > FMB900 > FMB900 Configuration > FMB900 Status infoThis section is an explanation of LED indications on an FMB900 device.
| Behaviour | Meaning |
|---|---|
| Permanently switched on | GNSS signal is not received |
| Blinking every second | Normal mode, GNSS is working |
| Off | GNSS is turned off because: Device is not working or Device is in sleep mode |
| Blinking fast constantly | Device firmware is being flashed |
Status LED Indications
| Behaviour | Meaning |
|---|---|
| Blinking every second | Normal mode |
| Blinking every two seconds | Sleep mode |
| Blinking fast for a short time | Modem activity |
| Off | Device is not working or Device is in boot mode |
CAN Status LED indications
| Behaviour | Meaning |
|---|---|
| Blinking fast constantly | Reading CAN data from vehicle |
| Permanently switched on | CAN unit unresponsive |
| Off | Wrong program number or wrong wire connection or CAN processor is in sleep mode = CAN data not received |