Difference between revisions of "Template:FMB640 Features settings"

From Wiki Knowledge Base | Teltonika GPS
Line 10: Line 10:
 
! style="width: 500px; background: black; color: white;" | Description
 
! style="width: 500px; background: black; color: white;" | Description
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''Scenario Settings''
+
! style="text-align: left; vertical-align: top;" | ''Output Control''
−
| style="text-align: left; vertical-align: top;" | Enable/Disable Green driving functionality.
+
| style="text-align: left; vertical-align: top;" | Select DOUT for scenario to inform about generated event.
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''Max Acceleration''
+
! style="text-align: left; vertical-align: top;" | ''Scenario source''
−
| style="text-align: left; vertical-align: top;" | Value which can be reached while accelerating without triggering harsh acceleration event.
+
| style="text-align: left; vertical-align: top;" | Select GPS to get data from satellites and use Green driving scenario OR select accelerometer and use ECO driving scenario.
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''Max Braking Acceleration''
+
! style="text-align: left; vertical-align: top;" | ''Max Acceleration Force''
−
| style="text-align: left; vertical-align: top;" | Value which can be reached while braking without triggering harsh braking event.
+
| style="text-align: left; vertical-align: top;" | Value which can be reached while accelerating without triggering harsh acceleration event. acceleration event.
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''Max Cornering Acceleration''
+
! style="text-align: left; vertical-align: top;" | ''Max Braking Force''
 +
| style="text-align: left; vertical-align: top;" | Value which can be reached while braking without triggering harsh braking event..
 +
|-
 +
! style="text-align: left; vertical-align: top;" | ''Max Cornering Force''
 
| style="text-align: left; vertical-align: top;" | Value which can be reached while cornering without triggering harsh cornering event.
 
| style="text-align: left; vertical-align: top;" | Value which can be reached while cornering without triggering harsh cornering event.
 
|-
 
|-
−
! style="text-align: left; vertical-align: top;" | ''Source''
+
! style="text-align: left; vertical-align: top;" | ''Acceleration Active Output Duration''
−
| style="text-align: left; vertical-align: top;" | Which source (GPS or accelerometer) data will be collected from.
+
| style="text-align: left; vertical-align: top;" | Set active output duration after harsh acceleration event detected.
 +
|-
 +
! style="text-align: left; vertical-align: top;" | ''Braking Active Output Duration''
 +
| style="text-align: left; vertical-align: top;" | Set active output duration after harsh braking event detected.
 +
|-
 +
! style="text-align: left; vertical-align: top;" | ''Cornering Active Output Duration''
 +
| style="text-align: left; vertical-align: top;" | Set active output duration after harsh cornering event detected.
 
|-
 
|-
 
|}
 
|}
  
−
===Data output===
+
 
−
----
 
−
Data from accelerometer/GPS are continiously monitored and processed and are used to decide whether a harsh event has occured. If either of three cases is satisfied, an event is generated and a record is saved and sent to the server ({{{model|FMB640}}} must be properly configured in order to send the record). Event value is multiplied by 10 before sending/saving record to get more precision when displaying data.{{{text_dout|<br/>Digital output 1, Digital output 2, Digital output 3 and Digital output 4 can be activated for a period of time to warn the driver. Output on-time is configured separately for each feature case.}}}
 
−
<br/><br/>
 
 
==Over Speeding==
 
==Over Speeding==
  
Line 67: Line 73:
 
<br/><br/><br/><br/><br/><br/><br/>
 
<br/><br/><br/><br/><br/><br/><br/>
  
−
{{{par_dout|==DOUT controls==
+
==Short burst data settings==
−
Please refer to [[FMB640 DOUT controls|DOUT controls]].}}}
+
 
 +
FMB640  supports Iridium devices which can send short burst data (SBD) to server. This means that some data can be sent from FM device to server through satellites.
 +
 
 +
FMB640 will enable satellite mode only if device can not send data via GPRS. Satellite mode has his own Save/Send period. If timeout is set to 0 no periodic records will be made. It is not recommended to save records often because of satellites traffic price. 8 kilobytes monthly data limit is hardcoded in firmware. If data limit is reached – data limit counter will reset automatically only on next month first day or you can rest counter by SMS command “sbdlimitsreset”.
 +
 
 +
In addition, you can select which IO element can generate Satellite record. In order to do that you need to go to IO tab select IO record priority Panic and check checkbox “Satellite I/O” what you want to get that data through satellites if there is no GSM connection.
 +
Record which will be sent through Iridium satellites network will be different than the regular record. It will contain: 4 bytes timestamp, 3 bytes longitude, 3 bytes latitude, 1 byte record generation info, 1 byte DIN,DOUT info, 1 byte speed value.
 +
 
 +
'''NOTE''': Port1/2 cable from FM package can be used for TSM232 connection. For this you need to cut a D-SUB connector and connect wires according instruction above (PIN 4 to TSM GND, PIN5 to TSM Rx, PIN6 to TSM Tx).
 +
 
 +
 
 +
'''NOTE''': SBD data is limited to 8000 Bytes per month. For firmware with bigger SBD data limit, please ask your sales manager.
 +
If data limit is reached you can reset it with SMS command “sbdlimitsreset”

Revision as of 18:22, 27 November 2018

Green Driving

FMB640 green driving.png

When vehicle parameters exceed the values of Max Acceleration, Max Braking or Max Cornering parameters, the scenario is activated: a record is generated and digital output status is changed to 1 when configured. You can configure all three parameters in m/s2 units. Scenario is activated until current Acceleration, Braking or Cornering value decreases below the set parameter value.
Parameters used with Green Driving functionality are given in a table below.

Parameter name Description
Output Control Select DOUT for scenario to inform about generated event.
Scenario source Select GPS to get data from satellites and use Green driving scenario OR select accelerometer and use ECO driving scenario.
Max Acceleration Force Value which can be reached while accelerating without triggering harsh acceleration event. acceleration event.
Max Braking Force Value which can be reached while braking without triggering harsh braking event..
Max Cornering Force Value which can be reached while cornering without triggering harsh cornering event.
Acceleration Active Output Duration Set active output duration after harsh acceleration event detected.
Braking Active Output Duration Set active output duration after harsh braking event detected.
Cornering Active Output Duration Set active output duration after harsh cornering event detected.


Over Speeding

FMB640 over speeding.png

When vehicle speed exceeds configured maximum speed value the scenario is activated, an event record is generated and digital output status is changed to 1 when configured.
Scenario is active until detected speed decreases below the set parameter value.




Jamming

FMB640 jamming.png

When jamming is detected the scenario is activated, an event record is generated and digital output status is changed to 1 when configured once Jamming timeout runs out. If jamming ends during timeout countdown no event will be generated and output will not be controlled.
Eventual Records parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise it will be appended only to eventual records.









Immobilizer

FMB640 immobilizer.png

Vehicle can be used only if iButton is connected. In this scenario iButton list is not used; connect any iButton to pass Immobilizer security. Selected DOUT is controlled by scenario for user needs.









Authorized driving

FMB640 authorizedD.png

Gives ability to use vehicle for 500 specific iButton owners (specified in iButton list). Selected DOUT is controlled by scenario for user needs, to manage buzzer, LED etc.









iButton Read Notification

FMB640 iButtonReadNotification.png

If scenario is enabled, when iButton is attached and is successfully read, configured DOUT goes ON for configurable amount of time (min: 0.1 s; max: 5.00 s; default: 0.2 s). If Immobilizer scenario is enabled and iButton’s indication scenario is enabled and the same DOUT controls are chosen then in case iButton is attached DOUT is not affected. IButton’s event generation works as a standard IO event generation






Short burst data settings

FMB640 supports Iridium devices which can send short burst data (SBD) to server. This means that some data can be sent from FM device to server through satellites.

FMB640 will enable satellite mode only if device can not send data via GPRS. Satellite mode has his own Save/Send period. If timeout is set to 0 no periodic records will be made. It is not recommended to save records often because of satellites traffic price. 8 kilobytes monthly data limit is hardcoded in firmware. If data limit is reached – data limit counter will reset automatically only on next month first day or you can rest counter by SMS command “sbdlimitsreset”.

In addition, you can select which IO element can generate Satellite record. In order to do that you need to go to IO tab select IO record priority Panic and check checkbox “Satellite I/O” what you want to get that data through satellites if there is no GSM connection. Record which will be sent through Iridium satellites network will be different than the regular record. It will contain: 4 bytes timestamp, 3 bytes longitude, 3 bytes latitude, 1 byte record generation info, 1 byte DIN,DOUT info, 1 byte speed value.

NOTE: Port1/2 cable from FM package can be used for TSM232 connection. For this you need to cut a D-SUB connector and connect wires according instruction above (PIN 4 to TSM GND, PIN5 to TSM Rx, PIN6 to TSM Tx).


NOTE: SBD data is limited to 8000 Bytes per month. For firmware with bigger SBD data limit, please ask your sales manager. If data limit is reached you can reset it with SMS command “sbdlimitsreset”

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB640_Features_settings&oldid=23390"