Difference between revisions of "Template:FMB640 Accelerometer Features settings"
| Line 8: | Line 8: | ||
==Towing Detection== | ==Towing Detection== | ||
| − | [[Image:Fmb640_towing.png| | + | [[Image:Fmb640_towing.png|250px|right]] |
''Towing Detection'' feature helps to inform the driver about unexpected car movement when it was parked. {{{model|FMB640}}} generates an event when car is being towed or lifted, for example, in a case of vehicle evacuation. {{{model|FMB640}}} activates towing function when following conditions are met: | ''Towing Detection'' feature helps to inform the driver about unexpected car movement when it was parked. {{{model|FMB640}}} generates an event when car is being towed or lifted, for example, in a case of vehicle evacuation. {{{model|FMB640}}} activates towing function when following conditions are met: | ||
Revision as of 14:46, 1 June 2018
Excessive Idling
If ignition (DIN1 or Power Voltage) is ON and vehicle is not moving, after configured time period FMB640 will generate event. When vehicle starts moving FMB640 after configured time period generate event that vehicle idle time ends. You can configure time it takes to turn on this scenario (Time to Stopped). Scenario is activated until vehicle starts moving and keeps moving (moving is detected only from accelerometer) for amount of time that is configured. You can configure time it takes to turn OFF this scenario (Time to Stopped). .
Towing Detection
Towing Detection feature helps to inform the driver about unexpected car movement when it was parked. FMB640 generates an event when car is being towed or lifted, for example, in a case of vehicle evacuation. FMB640 activates towing function when following conditions are met:
- Ignition (configured Ignition Source) is OFF.
- Activation Timeout is reached.
When towing function is engaged FMB640 monitors accelerometer data. If acceleration Threshold or Angle reach configured values for a configured Duration, and Ignition is still OFF for a period of time that is longer than Event Timeout, then an event is generated. When configured, Make Call To and Send SMS To functions make a call or send an SMS to a predefined phone number. Towing function will be reactivated after FMB640 detects a change of Ignition state from ON to OFF.
Crash Detection
Scenario is activated when Crash is detected by device using acceleration values. Crash Detection functionality can be set according to these settings: 1. Threshold (mg) 2. Duration (ms) If accident happens and FMB640 detects acceleration value higher than set threshold value during set time period, then device will generate an event. Threshold and duration values are set depending of accident power which you want to detect. FMB640 can detect a slight tapping on the device (Threshold=100mg, Duration=1ms) or can detect severe accident (Threshold=4000mg, Duration=5ms).
DOUT controls
Please refer to DOUT controls.
