Template:FM36 System Settings: Difference between revisions
Simkunas.ma (talk | contribs) No edit summary |
Simkunas.ma (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
System settings have 7 configurable parameters: | System settings have 7 configurable parameters: | ||
*Sleep settings, where user can turn GPS sleep/deep sleep on or off; | *Sleep settings, where user can turn GPS sleep/deep sleep on or off; | ||
*Analog Input Settings, where user can choose analog input range 10 V or 30 V, | *Analog Input Settings, where user can choose analog input range 10 V or 30 V, depending on needed accuracy (lower range gives higher accuracy of measurements), and input voltage; | ||
depending on needed accuracy (lower range gives higher accuracy of | *Object Motion Detection Settings, where user can configure 3 ways how {{{model|FM36YX}}} will detect stopped movement, and change its working mode; | ||
measurements), and input voltage; | |||
*Object Motion Detection Settings, where user can configure 3 ways how {{{model|FM36YX}}} | |||
will detect stopped movement, and change its working mode | |||
*Static navigation settings, where user can turn static navigation on or off; | *Static navigation settings, where user can turn static navigation on or off; | ||
*Records Settings, where user can enable or disable records when GPS is not | *Records Settings, where user can enable or disable records when GPS is not available (no time synchronization); | ||
available (no time synchronization); | *GNSS Settings, where user can choose satellite system and GNSS FIX Timeout Time (if after timeout there will not be synchronized time, it will be synchronized via NTP server); | ||
*GNSS Settings, where user can choose satellite system and GNSS FIX Timeout Time | |||
(if after timeout there will not be synchronized time, it will be synchronized via NTP | |||
server) | |||
*Ignition Source sets ignition triggered functionalities to be triggered by: | *Ignition Source sets ignition triggered functionalities to be triggered by: | ||
**Power Voltage (if voltage is between High Voltage Level and Low Voltage | **Power Voltage (if voltage is between High Voltage Level and Low Voltage Level the ignition is considered to be turned on); | ||
Level the ignition is considered to be turned on); | |||
**Digital Input (DIN1 ON – ignition on, DIN1 OFF – ignition off); | **Digital Input (DIN1 ON – ignition on, DIN1 OFF – ignition off); | ||
** | **Movement (if accelerometer/movement sensor detects movement then ignition is on, if movement stops – ignition is off). | ||
ignition is on, if movement stops – ignition is off). | |||
Revision as of 12:16, 31 May 2018
System settings have 7 configurable parameters:
- Sleep settings, where user can turn GPS sleep/deep sleep on or off;
- Analog Input Settings, where user can choose analog input range 10 V or 30 V, depending on needed accuracy (lower range gives higher accuracy of measurements), and input voltage;
- Object Motion Detection Settings, where user can configure 3 ways how FM36YX will detect stopped movement, and change its working mode;
- Static navigation settings, where user can turn static navigation on or off;
- Records Settings, where user can enable or disable records when GPS is not available (no time synchronization);
- GNSS Settings, where user can choose satellite system and GNSS FIX Timeout Time (if after timeout there will not be synchronized time, it will be synchronized via NTP server);
- Ignition Source sets ignition triggered functionalities to be triggered by:
- Power Voltage (if voltage is between High Voltage Level and Low Voltage Level the ignition is considered to be turned on);
- Digital Input (DIN1 ON – ignition on, DIN1 OFF – ignition off);
- Movement (if accelerometer/movement sensor detects movement then ignition is on, if movement stops – ignition is off).