Difference between revisions of "FM3612 GSM settings, GPRS part"
From Wiki Knowledge Base | Teltonika GPS
m |
|||
| Line 3: | Line 3: | ||
|model=FM3612 | |model=FM3612 | ||
}} | }} | ||
| + | [[Category:FM3612 Configuration]] | ||
Revision as of 12:44, 30 April 2019
Main Page > EOL Products > FM3612 > FM3612 Configuration > FM3612 GSM settings, GPRS partGPRS defines main parameters for FM3612: GSM operator APN and GPRS username and password (optional – depending on operator), destination server IP and port, and allows to set protocol used for data transfers – TCP or UDP.
Yet user can choose if device will work only in GSM network, or it will prefer 3G network and switch to GSM only then 3G is absent.
Some operators use specific authentication for GPRS session – CHAP or PAP. If any of these is used, APN should be entered as ‘chap:<APN>’ or ‘pap:<APN>’. I.e. if operator is using APN ‘internet’ with CHAP authentication, it should be entered as ‘chap:internet’. Information about APN and authentication type should be provided by your GSM operator.
