Template:FMB964 Bluetooth OBD dongle: Difference between revisions

Revision as of 15:09, 21 September 2018

Blue-tooth settings configuration

Following are the instructions on how to easily prepare Blue-tooth Dongle connection to the FMB device. First we need to configure FMB device Blue-tooth settings. These are the required steps:

Go to Bluetooth section similarly to as shown in the figure to the right (position 1).
Turn on BT Radio by pressing Enable (visible) (position 2). "Local name" (position 3) will automatically be "FMB1YX_last 7 imei digits", you can leave it or type your own name.
Set Security Mode (position 4) to PIN only or None (you could select PIN + MAC list or MAC list only security mode but in this case you need to type external device MAC address in Authorized Devices MAC List (position 7).
Set connection mode to OBDII (position 5).
Set External Name as your Blue-tooth OBD II device name for proper device identification and connection to it. In this example OBDII device name is "DONGLE", at least 2 characters are needed to recognize it and connect to it. For better and faster adapter identification in network you could enter a full device name. You could check your OBDII adapter Blue-tooth name by scanning nearby Blue-tooth devices using a mobile phone or a computer with Blue-tooth adapter.
Go to OBD II in main menu and select priority and others parameters visible in the following figure.

After all these steps press Save to device to save configuration (position 8 in the top right hand figure).
Now you can disconnect FMB device from the configurator.

Connecting to Blue-tooth OBD II dongle

After this configuration OBDII dongle can be connected to FMB device. Turn on ignition, then turn on its Blue-tooth connection. For pairing follow dongle instructions. OBDII device notification about paired Blue-tooth connection depends on the specific model. If you later restart FMB device it will automatically reconnect to this dongle.

Supported Blue-tooth OBD II dongles

FMB module works with Blue-tooth OBD II dongles which are based on ELM327 or STN1110 chips.
Comparison of these chips is presented in the image below:

@@ Line 1: / Line 1: @@
-===Bluetooth settings configuration===
+===Blue-tooth settings configuration===
 [[Image:Fmb120_bt_odbii_settings.png|300px|right]]
-Following are the instructions on how to easily prepare Bluetooth Dongle connection to the {{{model_2|FMB}}} device. First we need to configure {{{model_2|FMB}}} device Bluetooth settings. These are the required steps:
+Following are the instructions on how to easily prepare Blue-tooth Dongle connection to the {{{model_2|FMB}}} device. First we need to configure {{{model_2|FMB}}} device Blue-tooth settings. These are the required steps:
 * Go to <span style=color:#F6A83E>Bluetooth</span> section similarly to as shown in the figure to the right (position 1).
 * Turn on BT Radio by pressing <span style=color:#F6A83E>Enable (visible)</span> (position 2). "Local name" (position 3) will automatically be "{{{model|FMB1YX}}}_last 7 imei digits", you can leave it or type your own name.
 * Set ''Security Mode'' (position 4) to <span style=color:#F6A83E>PIN only</span> or <span style=color:#F6A83E>None</span> (you could select <span style=color:#F6A83E>PIN + MAC list</span> or <span style=color:#F6A83E>MAC list only</span> security mode but in this case you need to type external device MAC address in ''Authorized Devices MAC List'' (position 7).
 * Set connection mode to <span style=color:#F6A83E>OBDII</span> (position 5).
-* Set ''External Name'' as your Bluetooth OBD II device name for proper device identification and connection to it. In this example OBDII device name is "DONGLE", at least 2 characters are needed to recognize it and connect to it. For better and faster adapter identification in network you could enter a full device name. You could check your OBDII adapter Bluetooth name by scanning nearby Bluetooth devices using a mobile phone or a computer with Bluetooth adapter.
+* Set ''External Name'' as your Blue-tooth OBD II device name for proper device identification and connection to it. In this example OBDII device name is "DONGLE", at least 2 characters are needed to recognize it and connect to it. For better and faster adapter identification in network you could enter a full device name. You could check your OBDII adapter Blue-tooth name by scanning nearby Blue-tooth devices using a mobile phone or a computer with Blue-tooth adapter.
 * Go to <span style=color:#F6A83E>OBD II</span> in main menu and select priority and others parameters visible in the following figure.
@@ Line 15: / Line 15: @@
 * Now you can disconnect {{{model_2|FMB}}} device from the configurator.
-===Connecting to Bluetooth OBD II dongle===
+===Connecting to Blue-tooth OBD II dongle===
 ----
-After this configuration OBDII dongle can be connected to {{{model_2|FMB}}} device. Turn on ignition, then turn on its Bluetooth connection. For pairing follow dongle instructions. OBDII device notification about paired Bluetooth connection depends on the specific model. If you later restart {{{model_2|FMB}}} device it will automatically reconnect to this dongle.
+After this configuration OBDII dongle can be connected to {{{model_2|FMB}}} device. Turn on ignition, then turn on its Blue-tooth connection. For pairing follow dongle instructions. OBDII device notification about paired Blue-tooth connection depends on the specific model. If you later restart {{{model_2|FMB}}} device it will automatically reconnect to this dongle.
-===Supported Bluetooth OBD II dongles===
+===Supported Blue-tooth OBD II dongles===
 ----
-{{{model_2|FMB}}} module works with Bluetooth OBD II dongles which are based on ELM327 or STN1110 chips.<br/>Comparison of these chips is presented in the image below:
+{{{model_2|FMB}}} module works with Blue-tooth OBD II dongles which are based on ELM327 or STN1110 chips.<br/>Comparison of these chips is presented in the image below:
 [[Image:Elm317_stn1110_comp.png|400px|none]]