FMA120 General description

FMA120 is a tracking terminal with GNSS and GSM connectivity, which is able to collect device coordinates and transfer them via GSM network to a server. This device is perfectly suitable for applications, which require the location acquirement of remote objects.

Package contents

The FMA120 device is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation. The package contains:

• FMA120 device;
• Input and output power supply cable with 2x5 connection pins;
• Micro USB cable;

Basic characteristics

GSM / GPRS features:

• Quad band supported (GSM 850 / 900 / 1800 / 1900 MHz);
• GPRS Multi-Slot Class 12(up to 240 kbps);
• GPRS Mobile Station Class B;
• SMS (text, data).

GNSS features:

• Tracking: 33/ 99 acquisition channels;
• Up to -165 dBm sensitivity;
• Hot start < 1s;
• Warm start < 25s;
• Cold start < 35s;
• NMEA -183 protocol;
• GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS;
• Accuracy < 3m.

Hardware features:

• Cortex®-M3 processor;
• 1 MB internal Flash memory;
• Built-in accelerometer.

Interface features:

• Power supply: 10 ÷ 30V;
• USB port;
• 3 digital inputs;
• 1 analog input;
• 2 open collector digital outputs;
• 1Wire® temperature sensor
• 1Wire® iButton
• LEDs indicating device status.

Special features:

• Any element event triggers (external sensor, input, speed, temperature, etc.);
• Highly configurable data acquisition and sending;
• Multiple Geo-fence areas;
• Sleep mode;
• Deep sleep mode;
• Configurable scenarios available;
• Real-time process monitoring;
• Authorized number list for remote access;
• Firmware update over GPRS or USB port;
• Configuration update over GPRS, SMS or USB port;
• TCP/IP or UDP/IP protocol support;
• 3500 record storing.

Template:FMB Supply voltage

Technical features

Part name	Physical specification
Navigation indication	LED
Modem indication	LED
Socket 2x5	Tyco Micro MATE-N-LOK™ 4-794628-0 or similar
USB	Mini USB socket
GNSS	Internal GNSS antenna
GSM	Internal GSM antenna

Technical details
2 W max. Current consumption at 12 V	GPRS: average 120 mA rms Nominal: average 65 mA rms GNSS sleep: average 28 mA Deep Sleep: average 5 mA²
Battery charge current	Average 115 mA
Operating temperature	-25°C..+55 °C
Storage temperature	-40°C..+70 °C
Storage relative humidity	5..95% (no condensation)
Internal fuse	3A, 125V

Dimension drawing:

Technical information about internal battery

Internal back-up battery	Battery voltage (V)	Nominal Capacity (mAh)	Power (Wh)	Charge temperature (°C)	Discharge temperature (°C)	Storage temperature (°C)
Li-ion rechargeable battery	3.75～3.90	170	0.64 – 0.66	0 to +45	-20 to +60	-20 to +45 for 1 month -20 to +35 for 6 months

Batteries are covered by 6 month warranty support.

	CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
	Battery should not be disposed of into general household waste. Bring damaged or worn-out batteries to your local recycling center or dispose them into a battery recycle bin commonly found in supermarkets.

Electrical characteristics

Characteristic description	Value
	Min.	Typ.	Max.	Unit
Supply Voltage:
Supply Voltage (Recommended Operating Conditions)	+10		+30	V
Digital Output (Open Drain grade):
Drain current (Digital Output OFF)			120	µA
Drain current (Digital Output ON, Recommended Operating Conditions)	0.1		0.5	A
Static Drain-Source resistance (Digital Output ON)		400	600	mΩ
Digital Input:
Input resistance (DIN1)	47			kΩ
Input resistance (DIN2)	51.7			kΩ
Input resistance (DIN3)	47			kΩ
Input voltage (Recommended Operating Conditions)	0		Supply voltage	V
Input Voltage threshold (DIN1)		7.5		V
Input Voltage threshold (DIN2)		2.5		V
Input Voltage threshold (DIN3)		2.5		V
Analog Input:
Input voltage (Recommended Operating Conditions), Range 1	0		+10	V
Input resistance, Range 1		150		kΩ
Measurement error on 12V, Range 1		3		%
Additional error on 12 V, Range 1		360		mV
Measurement error on 30 V, Range 1		3		%
Additional error on 30 V, Range 1		900		mV
Input Voltage (Recommended Operating Conditions), Range 2	0		+30	V
Input resistance, Range 2		150		kΩ
Measurement error on 12V, Range 2		3		%
Additional error on 12 V, Range 2		360		mV
Measurement error on 30 V, Range 2		3		%
Additional error on 30 V, Range 2		900		mV
Output Supply Voltage 1-Wire:
Supply voltage	+4.5		+4.7	V
Output inner resistance		7		Ω
Output current (Uout > 3.0 V)		30		mA
Short circuit current (Uout = 0)		75		mA

Ground sense:
Input resistance	38.45			kΩ
Input voltage (Recommended operating conditions)	0		Supply voltage	V
Input voltage threshold		0.5		V
Sink current			180	nA

CAN interface:
Internal terminal resistor CAN bus (no internal termination resistor)	-	-	-	Ω
Differential input resistance	19	30	52	kΩ
Recessive output voltage	2	2.5	3	V
Differential receiver threshold Voltage	0.5	0.7	0.9	V
Common mode input voltage	-30	-	30	V

Analog Input error margin can increase if temperature varies.

Absolute maximum ratings

Characteristic description	Value
	Min.	Typ.	Max.	Unit
Supply Voltage (Absolute Maximum Ratings)	-32		+32	V
Drain-Source clamp threshold voltage (Absolute Maximum Ratings), (Idrain = 2 mA)			+36	V
Digital Input Voltage (Absolute Maximum Ratings)	-32		+32	V
Analog Input Voltage (Absolute Maximum Ratings)	-32		+32	V