0
edits
Changes
Template:FMB First start config (view source)
Revision as of 11:03, 17 October 2018
, 11:03, 17 October 2018no edit summary
=='''How to install {{{model|FMB1YX}}} drivers (Windows)'''==
=='''PC Connection (Windows)'''==
1. Power-up {{{model|FMB1YX}}} with '''DC voltage {{{dc_voltage|(10 – 30 V)}}}''' power supply using '''supplied power cable'''. LED’s should start blinking, see “LED indications”.
2. Connect device to computer using '''Micro-USB''' cable or '''Blue-tooth''' connection:<br>
* Using '''Micro-USB cable'''
** You will need to install USB drivers, see "[[#How to install {{{model|FMB1YX}}} USB drivers (Windows)|How to install {{{model|FMB1YX}}} USB drivers (Windows)]]"
* Using '''Blue-tooth'''
** FMB001 Blue-tooth is enabled by default. Turn on '''Blue-tooth''' on your PC, then select '''Add Blue-tooth or other device > Blue-tooth'''. Choose your device named – “'''{{{model|FMB1YX}}}_last_7_imei_digits'''”, without '''LE''' in the end. Enter default password '''5555''', press '''Connect''' and then select '''Done'''.
3. You are now ready to use the device on your computer.
=='''How to install {{{model|FMB1YX}}} USB drivers (Windows)'''==
1. Please download COM port drivers from Teltonika '''[https://teltonika.lt/downloads/en/fmb120/TeltonikaCOMDriver.zip here]'''.
1. Please download COM port drivers from Teltonika '''[https://teltonika.lt/downloads/en/fmb120/TeltonikaCOMDriver.zip here]'''.