Template:FMB First start config: Difference between revisions

Revision as of 15:39, 17 October 2018

PC Connection (Windows)

1. Power-up FMB1YX with DC voltage (10 – 30 V) power supply using supplied power cable. LED’s should start blinking, see “LED indications”.

2. Connect device to computer using Micro-USB cable or Blue-tooth connection:

Using Micro-USB cable
- You will need to install USB drivers, see "How to install USB drivers (Windows)"
Using Blue-tooth
- FMB1YX Blue-tooth is enabled by default. Turn on Blue-tooth on your PC, then select Add Blue-tooth or other device > Blue-tooth. Choose your device named – “FMB1YX_last_7_imei_digits”, without LE in the end. Enter default password 5555, press Connect and then select Done.

3. You are now ready to use the device on your computer.

How to install USB drivers (Windows)

1. Please download COM port drivers from Teltonika here.

2. Extract and run TeltonikaCOMDriver.exe.

3. Click Next in driver installation window.

4. In the following window click Install button.

5. Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup.

Configuration (Windows)

At first FMB1YX device will have default factory settings set. These settings should be changed according to the user's needs.
Main configuration can be performed via Teltonika Configurator software. Contact sales manager to get the latest FMB1YX Configurator version or download it from here. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.

MS .NET requirements
Operating system	MS .NET Framework version	Version	Links
Windows Vista Windows 7 Windows 8.1 Windows 10	MS .NET Framework 4.6.2	32 and 64 bit	www.microsoft.com www.teltonika.lt

Downloaded Configurator will be in compressed archive. Extract it and launch Configurator.exe. After launch software language can be changed by clicking in the right bottom corner:

Configuration process begins by pressing on connected device:

After connection to Configurator Status window will be displayed:

Various Status window tabs display information about GNSS, GSM, I/O, Maintenance and etc. FMB1YX has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using Save to device button. Main buttons offer following functionality:

Load from device – loads configuration from device.
Save to device – saves configuration to device.
Load from file – loads configuration from file.
Save to file – saves configuration to file.
Update firmware – updates firmware on device.
Read records – read records from device.
Reboot device – restarts device.
Reset configuration – sets device configuration to default.

Most important configurator section is GPRS – where all your server and GPRS settings can be configured and Data Acquisition – where data acquiring parameters can be configured. More details about FMB1YX configuration using Configurator can be found in the manual.

@@ Line 25: / Line 25: @@
 =='''Configuration (Windows)'''==
+At first {{{model|FMB1YX}}} device will have default factory settings set. These settings should be changed according to the user's needs.<br/>
+Main configuration can be performed via '''Teltonika Configurator''' software. Contact sales manager to get the latest {{{model|FMB1YX}}} '''Configurator''' version or download it from '''[https://teltonika.lt/downloads/en/fmb900/FMB.Configurator_v0.14.5.27701_C.001.7z here]'''. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
 {| class="wikitable"
-|+.NET requirements
+|+ style="text-align: left;"         | MS .NET requirements
 ! style="background: white;"         | Operating system
 ! style="background: white;"         | MS .NET Framework version
@@ Line 35: / Line 37: @@
 | style="text-align: left; background: #F6F6FB;"         | MS .NET Framework 4.6.2
 | style="text-align: left; background: #F6F6FB;"         | 32 and 64 bit
-| style="text-align: left; background: #F6F6FB;"         | [https://www.microsoft.com/en-us/download/confirmation.aspx?id=53344 Microsoft.com]
+| style="text-align: left; background: #F6F6FB;"         | [https://www.microsoft.com/en-us/download/confirmation.aspx?id=53344 www.microsoft.com]
-[http://avl1.teltonika.lt/downloads/software/Framework/.NET%20Framework%204.6.2/NDP462-KB3151800-x86-x64-AllOS-ENU.exe  Teltonika.lt]
+[http://avl1.teltonika.lt/downloads/software/Framework/.NET%20Framework%204.6.2/NDP462-KB3151800-x86-x64-AllOS-ENU.exe  www.teltonika.lt]
 |-
 |}
-At first {{{model|FMB1YX}}} device will have default factory settings set. These settings should be changed according to the user's needs.<br/>
+Downloaded '''Configurator''' will be in compressed archive. Extract it and launch '''Configurator.exe'''. After launch software language can be changed by clicking [[File:Language_icon.png|25px|link=]] in the right bottom corner:
-Device can be configured to acquire and send data to server, in this case the GSM settings shall be set in regards with GSM operator's information. If device GSM is unavailable, the device will not be able to send the data and {{{model|FMB1YX}}} will start storing records to flash memory. It is possible to store up to 192000 data records with {{{txt_memory|128 MB SD memory card}}} (when 100 MB are used to store records). It will send data over GPRS when it is available. Note that {{{model|FMB1YX}}} might reach its full memory capacity. If such case happens, the device will start deleting the oldest records in order to save new ones.<br/>
-{{{model|FMB1YX}}} configuration is performed via {{{model|FMB1YX}}} Configurator program. Contact sales manager to get the latest {{{model|FMB1YX}}} Configurator version or download from '''[https://teltonika.lt/downloads/en/fmb900/FMB.Configurator_v0.14.5.27701_C.001.7z here]'''. {{{model|FMB1YX}}} configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework.
+[[File:FMB_Configurator_language.jpg|400px]]
+Configuration process begins by pressing on connected device:
+[[File:{{{cfg_connect|Configurator_connect-FMB120.jpg}}}|400px]]
+After connection to Configurator '''Status window''' will be displayed:
+[[Image:{{{first_time|Fmb120_configurator.png}}}|1000px|none]]
-[[Image:{{{first_time|Fmb120_configurator.png}}}|1200px|none]]
+Various '''Status window''' tabs display information about '''GNSS, GSM, I/O, Maintenance''' and etc. {{{model|FMB1YX}}} has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using '''Save to device''' button. Main buttons offer following functionality:<br/>
-Module configuration can be performed over USB cable or using a Blue-tooth connection. Configuration process begins by starting {{{model|FMB1YX}}} Configurator software and then connecting to {{{model|FMB1YX}}} device via '''Connect''' button located in '''Online''' menu part. {{{model|FMB1YX}}} has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to {{{model|FMB1YX}}} device using '''Save to device''' button.<br/>
+# [[File:Load_from_device.png|25px|link=]] '''Load from device''' – loads configuration from device.
-Main buttons offer following functionality:<br/>
+# [[File:Save_to_device.png|25px|link=]] '''Save to device''' – saves configuration to device.
-* '''Load from device''' – loads configuration from device.
+# [[File:Load_from_file.png|25px|link=]] '''Load from file''' – loads configuration from file.
-* '''Save to device''' – saves configuration to device.
+# [[File:Save_to_file.png|25px|link=]] '''Save to file''' – saves configuration to file.
-* '''Load from file''' – loads configuration from file.
+# [[File:Firmware_update.png|25px|link=]] '''Update firmware''' – updates firmware on device.
-* '''Save to file''' – saves configuration to file.
+# [[File:Read_records.png|25px|link=]] '''Read records''' – read records from device.
-* '''Update firmware''' – updates firmware on device.
+# [[File:Reboot_device.png|25px|link=]] '''Reboot device''' – restarts device.
-* '''Reset configuration''' – sets device configuration to default.
+# [[File:Reset_configuration.png|25px|link=]] '''Reset configuration''' – sets device configuration to default.
-More details on using the Configurator can be found {{{config_link|in the manual}}}.
+Most important configurator section is GPRS – where all your server and GPRS settings can be configured and Data Acquisition – where data acquiring parameters can be configured.
+More details about {{{model|FMB1YX}}} configuration using Configurator can be found {{{config_link|in the manual}}}.