Difference between revisions of "Template:FMB64 First start card"
From Wiki Knowledge Base | Teltonika GPS
| Line 2: | Line 2: | ||
| − | <b>{{{description|Leading GNSS/GSM/ | + | <b>{{{description|Leading GNSS/GSM/Bluetooth Terminal for advanced applications}}}</b> |
{{{pic|[[Image:Fmb640.png|400px|right]]}}} | {{{pic|[[Image:Fmb640.png|400px|right]]}}} | ||
Revision as of 09:32, 11 September 2019
Leading GNSS/GSM/Bluetooth Terminal for advanced applications
How to insert Micro-SIM card
- Gently remove FMB1YX cover using plastic pry tool from both sides.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is not pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
- Attach device cover and put the screws from the package into the holes.
- Screw all 4 screws.
- Device is ready to be connected.
 |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
How to insert microSD card
- Push microSD card lock case.
- Open microSD card locker.
- Correctly insert microSD card into slot.
- Close microSD card locker.
- Push microSD card lock case to locked position.
