Difference between revisions of "Template:MTB100 First start card"

From Wiki Knowledge Base | Teltonika GPS
Line 16: Line 16:
 
# Attach device '''cover''' back.
 
# Attach device '''cover''' back.
  
−
[[Image:MTB100_cover_1.png|280px]][[Image:MTB100_cover_2.png|280px]][[Image:MTB100_cover_3.png|280px]][[Image:MTB100_cover_4.png|280px]]
+
[[Image:MTB100-New-Battery-insert-1.png|280px]][[Image:MTB100-New-Battery-insert-2.png|280px]][[Image:MTB100-New-Battery-insert-3.png|280px]][[Image:MTB100-New-Battery-insert-4.png|280px]]
  
  

Revision as of 14:32, 24 March 2020

Qsg rut950 teltonika.PNG

Small and smart tracker with Blue-tooth

MTB100.png




How to insert Micro-SIM card and connect internal back-up battery

  1. Gently remove MTB100 cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  3. Connect internal back-up battery.
  4. Attach device cover back.

MTB100-New-Battery-insert-1.pngMTB100-New-Battery-insert-2.pngMTB100-New-Battery-insert-3.pngMTB100-New-Battery-insert-4.png


Alert.png
 Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:MTB100_First_start_card&oldid=55693"