Difference between revisions of "Template:FMM640 CAN adapters"
(Created page with "==Purpose of CAN adapters LV-CAN200 and ALL-CAN300== 350px|none LV-CAN200 is used to read data from light vehicles, while ALL-CAN300 is...") |
|||
| Line 22: | Line 22: | ||
|- | |- | ||
|} | |} | ||
| + | |||
| + | ==LV-CAN200 and ALL-CAN300 program number selection== | ||
| + | LV-CAN200 or ALL-CAN300 must be set to program number which depends on the vehicle model. '''Needed program number is always written on LV-CAN200 or ALL-CAN300 mounting scheme.''' Please contact Teltonika sales manager to get the latest supported vehicle list and mounting scheme for your vehicle providing information about car manufacturer, model and year. | ||
| + | |||
| + | ===LV-CAN200 and ALL-CAN300 program number configuration via SMS command=== | ||
| + | ---- | ||
| + | LV-CAN200 and ALL-CAN300 program number can be set remotely, using SMS command, where X is new program number value:<br/>''"lvcansetprog X"''<br/> | ||
| + | |||
| + | ===Selecting LV-CAN200 and ALL-CAN300 program number manually=== | ||
| + | ---- | ||
| + | |||
| + | [[Image:FMB640_adapter_led.png|300px|right]] | ||
| + | Steps to set program number: | ||
| + | * Hold SWITCH down until LED stars blinking. | ||
| + | * Release the SWITCH. | ||
| + | * Then LED starts blinking and counting first digit of program number (one blink means digit 1, two blinks mean digit 2 etc). | ||
| + | * To stop counter push SWITCH. | ||
| + | * Release the SWITCH, then LED starts blinking and counting second digit of program number. | ||
| + | * To stop counter push SWITCH. | ||
| + | * Release the SWITCH, then LED starts blinking and counting third digit on program number. | ||
| + | * To stop counter push SWITCH. | ||
| + | * Release SWITCH, if programming is successful LED will blink 10 times. | ||
Revision as of 07:52, 26 August 2019
Purpose of CAN adapters LV-CAN200 and ALL-CAN300
LV-CAN200 is used to read data from light vehicles, while ALL-CAN300 is used to read data from any type of transport: light vehicles, trucks, buses, agriculture transport and other special transport. Using these adapters FMB640 device is able to collect and send vehicle data.
| Parameter | Value |
|---|---|
| Supply voltage | +9..+50 V |
| Power supply current | Average 10 mA. Max (peak) 100 mA |
| Working temperature | -40..+85 ºC |
| Max working humidity | 60 % (non condensate). |
LV-CAN200 and ALL-CAN300 program number selection
LV-CAN200 or ALL-CAN300 must be set to program number which depends on the vehicle model. Needed program number is always written on LV-CAN200 or ALL-CAN300 mounting scheme. Please contact Teltonika sales manager to get the latest supported vehicle list and mounting scheme for your vehicle providing information about car manufacturer, model and year.
LV-CAN200 and ALL-CAN300 program number configuration via SMS command
LV-CAN200 and ALL-CAN300 program number can be set remotely, using SMS command, where X is new program number value:
"lvcansetprog X"
Selecting LV-CAN200 and ALL-CAN300 program number manually
Steps to set program number:
- Hold SWITCH down until LED stars blinking.
- Release the SWITCH.
- Then LED starts blinking and counting first digit of program number (one blink means digit 1, two blinks mean digit 2 etc).
- To stop counter push SWITCH.
- Release the SWITCH, then LED starts blinking and counting second digit of program number.
- To stop counter push SWITCH.
- Release the SWITCH, then LED starts blinking and counting third digit on program number.
- To stop counter push SWITCH.
- Release SWITCH, if programming is successful LED will blink 10 times.
