Difference between revisions of "Requirements for eSIM"
| Line 18: | Line 18: | ||
<br/><br/><br/><br/><br/><br/><br/><br/><br/> | <br/><br/><br/><br/><br/><br/><br/><br/><br/> | ||
The only difference in pin-outs is the IO pin – 2 or 3. Both versions of pin-outs are suitable for devices with eSIM. | The only difference in pin-outs is the IO pin – 2 or 3. Both versions of pin-outs are suitable for devices with eSIM. | ||
| + | |||
| + | <!-- | ||
{| class="wikitable" | {| class="wikitable" | ||
|+ | |+ | ||
| Line 142: | Line 144: | ||
| style="width: 150px;" rowspan=2 |'''eSIM''' | | style="width: 150px;" rowspan=2 |'''eSIM''' | ||
|} | |} | ||
| + | --> | ||
'''3. Requirements for eSIM packing reel:''' | '''3. Requirements for eSIM packing reel:''' | ||
13“ in diameter. | 13“ in diameter. | ||
Revision as of 14:38, 25 September 2019
Main Page > Frequently Asked Questions - FAQ > Requirements for eSIMAn embedded-SIM (eSIM) or embedded universal integrated circuit card (eUICC) is a form of programmable SIM card that is embedded directly into a device. The surface mount format provides the same electrical interface as the full size, 2FF and 3FF SIM cards, but is soldered to a circuit board as part of the manufacturing process. In machine to machine (M2M) applications where there is no requirement to change the SIM card, this avoids the requirement for a connector, improving reliability and security. An eSIM can be provisioned remotely; end-users can add or remove operators without the need to physically swap a SIM from the device.
In order to use eSIM with Teltonika FM devices some basic requirements must be met.
1. eSIM dimensions
Must match standard MFF2 eSIM size. A drawing is below:
2. eSIM pin-out
There are two default eSIM pin-outs:
The only difference in pin-outs is the IO pin – 2 or 3. Both versions of pin-outs are suitable for devices with eSIM.
3. Requirements for eSIM packing reel:
13“ in diameter.
