Difference between revisions of "1-Wire RFID Reader"
| Line 19: | Line 19: | ||
| − | + | ==Product Specification== | |
| + | *Supported by <span class="mw-collapsible mw-collapsed"> [https://wiki.teltonika-gps.com/view/FMB110 FMB110], [https://wiki.teltonika-gps.com/view/FMB120 FMB120], [https://wiki.teltonika-gps.com/view/FMB122 FMB122], [https://wiki.teltonika-gps.com/view/FMB125 FMB125], [https://wiki.teltonika-gps.com/view/FMU125 FMU125], [https://wiki.teltonika-gps.com/view/FMM125 FMM125], [https://wiki.teltonika-gps.com/view/FMC125 FMC125], [https://wiki.teltonika-gps.com/view/FMB130 FMB130], [https://wiki.teltonika-gps.com/view/FMU130 FMU130], [https://wiki.teltonika-gps.com/view/FMC130 FMC130], [https://wiki.teltonika-gps.com/view/FMM130 FMM130], [https://wiki.teltonika-gps.com/view/FMB140 FMB140], [https://wiki.teltonika-gps.com/view/FMB202 FMB202], [https://wiki.teltonika-gps.com/view/FMB204 FMB204], [https://wiki.teltonika-gps.com/view/FMB640 FMB640], [https://wiki.teltonika-gps.com/view/FMC640 FMC640], [https://wiki.teltonika-gps.com/view/FMM640 FMM640] </span> | ||
*1-Wire Interface | *1-Wire Interface | ||
*Wiring - White wire – 1-wire data, Brown wire – power supply, Green - ground | *Wiring - White wire – 1-wire data, Brown wire – power supply, Green - ground | ||
| Line 34: | Line 35: | ||
*Operating temperature From -20 ºC to +55 ºC | *Operating temperature From -20 ºC to +55 ºC | ||
*Operating humidity Up to 70% | *Operating humidity Up to 70% | ||
| − | |||
==Installation== | ==Installation== | ||
Revision as of 11:49, 13 September 2021
Main Page > Accessories > 1-Wire RFID ReaderIntroduction to the product
Description:
One of the implemented features for fleet management devices is 1-Wire data protocol, which can be used to read RFID Tags by emulating them using iButton protocols. It is a convenient way to implement driver authorization in your vehicles if you want to use RFID Tags with minimal setup complexity.
1-Wire RFID readers are great in these use cases:
- Immobilizer - prevent anyone from starting the vehicle without scanning an iButton first.
- Authorized driving - keep track of who is driving your vehicle according to the iButton ID they use to authenticate themselves.
- AutoGeofencing – gives ability to know when car leaves customized areas without iButton authorization.
Product Specification
- Supported by FMB110, FMB120, FMB122, FMB125, FMU125, FMM125, FMC125, FMB130, FMU130, FMC130, FMM130, FMB140, FMB202, FMB204, FMB640, FMC640, FMM640
- 1-Wire Interface
- Wiring - White wire – 1-wire data, Brown wire – power supply, Green - ground
- Power Supply - 6,5-30 V DC
- Unique 125 kHz standard features 64-bit ROM (Read-Only Memory)
- Type of transponder - Manchester, 64 cycles per bit
- Antenna surface area - 6,8 cm²
- Reading range - 4 cm
- Reading frequency - 6 times per second for identification, 2 times per second when transponder is in range of reader
- Supported 1-Wire commands - 0x33 (0x0F) - Read ROM, 0xF0 - Search ROM
- Fastening method M12 thread
- Cable length 40 cm
- Operating temperature From -20 ºC to +55 ºC
- Operating humidity Up to 70%
Installation
To connect the 1-wire RFID reader, simply connect the 1-Wire Signal wire from the reader to the 1-Wire Data pin on the device, connect the 1-Wire Power wire to the 1-Wire Power pin and connect the ground wire to the same grounding used for the device.
| PIN NUMBER | PIN NAME |
DESCRIPTION |
|---|---|---|
| 1 | 1-wire Data (Data Dallas) | Outputs identification data via 1-Wire interface |
| 2 | VCC (+) | Power supply for the sensor |
| 3 | GND (-) | Ground |
Device configuration
Since this reader emulates received RFID values as iButton values, it has identical functionality as the iButton reader in this regard. The reader works as soon as it is connected, but the iButton isn't used anywhere other than displayed in the iButton I/O element. In order to use it for the Immobilizer scenario, the device must have the scenario enabled. Then, iButton check can be enabled to only accept iButtons specified in the iButton list under the 1-Wire tab. 
