FM6320 E-Mark: Difference between revisions

Revision as of 06:55, 11 April 2018

Main Page > EOL Products > FM6320 > FM6320 Certification & Approvals > FM6320 E-Mark

E-Mark is the regulations issued by the Economic Commission for Europe (referred to as ECE).

Description

According to the UN European Economic Commission regulations and the provisions of EU directives, in order to enter European market, cars, motorcycles and a variety of components and systems must be certified to meet the basic requirements of traffic safety and environmental protection. E-Mark and e-Mark are the European conformity marks issued by the transport sector, indicating that the products comply with relevant laws and regulations or directives. Vehicles and related products need to go through E-Mark certification process to be legally sold in Europe.

There are currently 28 EU countries in ECE, in addition to EU member countries, including Eastern European, Southern European and other non-European countries. ECE regulations apply to all members is recommended, not mandatory standards. Member States may apply the ECE regulations, or continue to use their own regulations. E-Mark logo is a circular frame, means when the vehicle stop travel, the products must be used, for example: windshield, seat belts, headlights, and so on. Each EU member state has its own number of E-Mark certificate.

Standards applied

This Approval shall apply to a type of electrical/electronic sub assemblies (ESA) from serial production under the following conditions:

Individual products from serial production shall comply at least with all requirements set out in the Regulation No. 10 R, Amendment 05, Supplement 01 "Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility".

Approval no.: E26 10 R 05 1229

Extension No.: 00

The attached test report and drawings shall be a constituent part of this Approval.

Every product shall be marked with a readable and durable:

- approval marking.

This type of product shall be allotted the following approval marking:

Attachments

You can find the PDF version of the certificate here.

Disclaimer:

Test reports that are referenced in declarations and certificates can be provided upon request. For the request to be approved, the recipient of the test reports should be a certification authority or certified test house. The recipients will be asked to sign a non-disclosure agreement (NDA).

https://unece.org/fileadmin/DAM/trans/main/wp29/wp29regs/2019/E-ECE-324-Add.9-Rev.6.pdf

@@ Line 1: / Line 1: @@
-{{ce description}}
+{{emark description}}
-{{ce standards}}
+==Standards applied==
-{| class="wikitable"
+This Approval shall apply to a type of electrical/electronic sub assemblies (ESA) from serial production under the following conditions:
-|+
-| style="width: 500px; background: #EEECE1;" | Standard
-| style="background: #EEECE1;" | Article
-|-
-| EN 60950–1:2006 + A1:2010 + A2:2013 + A11:2009 + A12:2011
-IEC 60950–1:2005 (Second Edition) + A1:2009 + A2:2013
+Individual products from serial production shall comply at least with all requirements set out in the '''Regulation No. 10 R, Amendment 05, Supplement 01''' "Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility".
-CSA C22.2 No. 60950–1:2007 + A1:2011 + A2:2014
+Approval no.: '''E26 10 R 05 1229'''
-UL60950-1:2007 (Second Edition) + A1:2011 + A2:2014
+Extension No.: '''00'''
-EN 62311:2008
+The attached test report and drawings shall be a constituent part of this Approval.
-EN 50383:2010
+Every product shall be marked with a readable and durable:
-| Health and safety - Article 3.1(a)
-|-
-| Draft EN 303 446-1 V1.1.0
-Draft EN 301 489-1 V2.2.0
+- approval marking.
-Draft EN 301 489-17 V3.2.0
+This type of product shall be allotted the following approval marking:
-Draft EN 301 489-52 V1.1.0
+[[File:FM6320 E-mark.jpg]]
-| Electromagnetic compatibility - Article 3.1(b)
-|-
-| EN 301 511 V12.5.1
-EN 301 908-1 V11.1.1
+==Attachments==
-EN 301 908-2 V11.1.1
+{|style="margin: 0 auto;valign="left""
+| [[File:E26 10 R 05 1229 00-1.png|thumb|left|250px|x250px|FM6320 E-mark page 1]]
-EN 301 908-13 V11.1.1
+| [[File:E26 10 R 05 1229 00-2.png|thumb|left|250px|x250px|FM6320 E-mark page 2]]
+| [[File:E26 10 R 05 1229 00-3.png|thumb|left|250px|x250px|FM6320 E-mark page 3]]
-Draft EN 303 413 V1.1.0
+| [[File:E26 10 R 05 1229 00-4.png|thumb|left|250px|x250px|FM6320 E-mark page 4]]
+| [[File:E26 10 R 05 1229 00-5.png|thumb|left|250px|x250px|FM6320 E-mark page 5]]
-EN 300 328 V2.1.1
+| [[File:E26 10 R 05 1229 00-6.png|thumb|left|250px|x250px|FM6320 E-mark page 6]]
-| Efficient use of radio spectrum - Article 3.2
+| [[File:E26 10 R 05 1229 00-7.png|thumb|left|250px|x250px|FM6320 E-mark page 7]]
-|-
 |}
-Therefore [[File:Certification ce logo.png]] is placed on the product.
+You can find the PDF version of the certificate '''[[Media:E26 10 R 05 1229 00.pdf|here]]'''.
 {{certification disclaimer}}
-==Attachments==
+{{emark links}}
-{|style="margin: 0 auto;valign="left""
-| [[File:EC Declaration of Conformity-1.png|thumb|left|300px|x300px|EU Declaration of conformity, FM6320 page 1]]
-| [[File:EC Declaration of Conformity-2.png|thumb|left|300px|x300px|EU Declaration of conformity, FM6320 page 2]]
-| [[File:EC Declaration of Conformity-3.png|thumb|left|300px|x300px|EU Declaration of conformity, FM6320 page 3]]
-|}
-You can the find PDF version of the declaration '''[[Media:EC Declaration of Conformity.pdf|here]]'''.
-{{Template:ce links}}